Lmxs30776s Parts

This is a replacement drain tube assembly that directs water from the appliance tub to the drain pump or household drain, helping restore proper water removal and reduce leaks. It's a direct-fit service part used in the drainage system. What it does:

• Channels wastewater away from the tub to the drain pump or drain line
• Helps prevent pooling or slow draining caused by a damaged or disconnected tube
• Restores a sealed path to reduce leaks at the tub-to-pump connection
• Suitable when the original drain tube is cracked, split, collapsed, or leaking

• One drain tube assembly as shown

• Disconnect power and water before beginning any repair to avoid shock or flooding
• Inspect and clean mating surfaces and clamps; replace clamps if corroded or damaged
• Ensure correct routing and secure connections to prevent kinks and leaks

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear for consistent drying. Replace a worn roller to restore steady drum rotation and reduce squeaks or rubbing sounds. What it does:

• Supports the drum while it spins to maintain proper alignment
• Reduces friction and prevents uneven drum movement or scraping
• Commonly replaces worn or noisy rollers that cause squealing or thumping
• Helps prevent premature wear to the drum and support shafts

• One roller assembly

• Disconnect power (and gas supply, if applicable) before starting any repairs
• Access typically requires opening the dryer cabinet; basic hand tools are usually sufficient
• Inspect other drum support components (other rollers, axles, and bearing pads) and replace if worn

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This connector assembly is an OEM-style electrical connector that restores a secure wiring connection between components, helping return reliable power and signal routing for proper appliance operation. What it does

• Provides a secure electrical link between wiring harnesses and internal components.
• Replaces damaged or corroded connector ends that cause intermittent power or signal loss.
• Helps resolve symptoms such as components that fail to power on, intermittent operation, or error codes tied to open/poor connections.
• Maintains correct wire orientation and contact alignment for safe function.

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the connector.
• Use basic hand tools and avoid force; damaged pins require careful alignment or replacement.

This drum roller replaces a worn support wheel that helps the dryer drum spin smoothly, reducing noise and preventing drum wobble. Restores quieter operation and proper drum alignment. What it does:

• Supports the dryer drum so it rotates evenly during a cycle
• Reduces squealing, scraping, or grinding noises from the drum area
• Helps stop drum wobble and uneven spinning that can cause wear
• Can reduce rubbing or burning smells caused by a seized or worn roller

• Disconnect power before starting any repairs; electric shock hazard.
• Typically accessed by removing the dryer front panel and drum—use care to support the drum.
• Inspect adjoining idler, belt, and rear rollers when replacing for complete repair.

The Main PCB Assembly is an OEM part for LG refrigerators. Housed inside the control housing, this circuit board directs all critical refrigerator operations from cooling and icemaking to door alarms. Precise programming maintains consistent temperatures across compartments.

Causes of a bad main PCB can include physical impact, moisture intrusion into circuit paths, or expected component degradation over time. Without proper control, the refrigerator sections cannot regulate temperatures as designed.

Symptoms of a bad main PCB include:  

• Inability to adjust temperature settings  
• Erratic cooling or icemaker performance
• Intermittent control functions and error codes
• Moisture or physical damage visible on PCB

This LG OEM replacement ensures reliable operation for years to come. Compatible also with Sears/Kenmore refrigerators, it provides a direct fit and restoration of essential cooling functions. Proper installation protects future operations.

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

This door switch cover houses and protects the refrigerator/freezer door switch, keeping the switch secure and aligned so the interior light and door-sensing functions work reliably. It's a direct-fit replacement for damaged or cracked covers. What it does:

• Protects the door switch from impacts, spills, and debris that can cause intermittent contacts or failure
• Keeps the switch properly positioned so the interior light turns on/off when the door opens and closes
• Helps ensure consistent door-sensing for control logic that manages defrost and cooling cycles
• Reduces the risk of moisture reaching the electrical switch components

• One door switch cover

• Power off and unplug the appliance before beginning any repair to avoid shock or damage
• Handle gently to avoid breaking the plastic tabs; some models use snap-in tabs or screws for mounting
• Verify switch alignment and operation before fully reassembling the door trim
• Replace the switch assembly as needed

This left-side door handle trim restores the finished appearance and edge protection on compatible refrigerators. It replaces cracked, scratched or missing trim to help the handle sit flush and improve the door's cosmetic finish. What it does

• Covers and protects the outer edge of the left door handle area
• Replaces cracked, broken or cosmetically damaged trim pieces
• Helps the handle sit flush and maintain a clean, finished look
• Works with the original mounting points and hardware

• One left door handle trim

• Remove contents from the door and support the door before beginning work
• Use basic hand tools to remove existing trim and secure the replacement to existing screw holes
• Do not force or bend the trim; align to original mounting points to avoid damage

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

This button assembly replaces a worn or unresponsive control panel button to restore reliable tactile input and control responsiveness. It's a direct-fit replacement designed to match the original button shape and feel. What it does:

• Replaces a damaged or stuck control panel button so you can select cycles and settings as intended
• Restores tactile feedback when pressing the front panel controls
• Helps eliminate intermittent or unregistered button presses that affect normal operation
• Designed to fit into the existing control panel and interface with the original switch mechanism

• One button assembly

• Disconnect power (unplug or shut off breaker) before starting any repair to avoid shock
• Access may require removing the control panel or console; refer to your model's service manual for panel removal steps
• Handle fragile plastic tabs and electrical connectors carefully to avoid breakage

This Front Cover Assembly replaces the main front panel of the appliance, restoring a finished appearance and protecting internal components. It helps keep the cabinet sealed and provides the proper mounting surface for controls and trim. What it does

• Replaces cracked, warped, or damaged front panel that exposes internal parts
• Restores proper alignment and fit of door, controls, and trim pieces
• Helps prevent dust, lint, or moisture from entering the cabinet
• Reduces vibration and rattling caused by a loose or broken front panel

• Disconnect power and any fuel supply before starting service
• Removing the existing panel may require removing screws, trim, or door assembly; keep fasteners organized
• Handle the replacement panel carefully to avoid scratching or bending during installation

This LED light cover protects and diffuses the appliance's interior LED, restoring even lighting and a finished appearance. It is a direct-fit replacement designed to match the original factory lens. What it does:

• Protects the LED assembly from debris and impacts
• Diffuses and softens LED output for even interior illumination
• Restores a cracked, yellowed, or missing lens that affects light distribution
• Helps prevent direct contact with the LED board

• One LED light cover

• Disconnect power or unplug the appliance before starting
• Handle the lens carefully to avoid scratches; it typically snaps into place or is retained by a few clips
• Use a small screwdriver only if necessary to release retaining clips; avoid forcing parts