Lrdcs2603s /00 Parts

This refrigerator water inlet valve assembly controls the flow of household water into the appliance. Replacing a faulty valve restores proper water delivery to the ice maker and/or dispenser and can stop leaks or continuous filling issues. What it does:

• Opens and closes to direct incoming water to the ice maker and/or dispenser as commanded
• Regulates fill so ice trays and dispenser receive the correct amount of water
• Resolves no water from dispenser, no ice or small/thin cubes
• Addresses slow fill/low flow, dripping from the back of the fridge, or continuous water flow
• A failing valve may buzz or click without dispensing water

• 1 water inlet valve assembly

• Unplug the refrigerator and turn off the household water supply before starting
• Place a towel or tray to catch residual water; relieve line pressure by dispensing until flow stops
• Note tubing and wire positions; transfer any mounting hardware from the old valve if needed
• After installation, restore water and power, check all connections for leaks, and flush the water system to purge air

This drawer tray assembly is the shelf/frame that supports the refrigerator's sliding drawer(s). Replacing a damaged assembly restores proper support and smoother drawer operation to keep storage space level, organized, and easy to use.

• Supports and guides the compartment drawer(s) for smooth opening/closing
• Provides a stable surface or cover above the drawer(s), as designed
• Helps keep drawers aligned to prevent binding or sagging
• Common failure signs: cracked/warped frame, drawers sticking or falling, glass/shelf not seating level, broken tabs or rail mounts

• Disconnect power to the refrigerator before servicing.
• Remove food, the affected drawer(s), and any glass insert if present.
• Release locking tabs/rails; transfer any reusable hardware or trim from the old tray.
• Seat the new assembly fully in its supports and verify smooth drawer travel before loading.

This holder assembly is a structural mounting piece that supports and secures an internal component in your appliance. Replacing a cracked or worn bracket helps restore proper alignment and keeps parts stable during everyday use.

• Provides a rigid mounting point for the attached component
• Keeps parts aligned to reduce movement and vibration
• Helps prevent rattling or noise from loose mounts
• Common signs of failure: visible cracks/broken tabs, looseness, or parts that won't stay seated

• Disconnect power and, if applicable, turn off the water supply before service
• Note the orientation of the original part to match fitment
• Reuse existing mounting screws or hardware unless the manufacturer specifies otherwise
• Do not overtighten fasteners; the secured component is fully seated and stable

This connector assembly links refrigerator components with a secure, factory-style connection. Replace a damaged or loose connector to restore reliable operation and prevent intermittent performance of the part(s) attached to it. What it does:

• Joins two factory leads/components with a secure locking interface
• Restores a stable connection so the attached component operates reliably
• Helps address intermittent operation, no response, or flickering due to worn or heat-damaged connectors
• Replaces connectors with broken locking tabs, loosened contacts, or visible melting/corrosion

• 1 connector assembly

• Disconnect power before servicing; if working near water lines, also shut off the water supply
• Note connector orientation and routing; take photos to aid reassembly
• Depress the locking tab to release; avoid pulling on wires
• Seat the new connector fully until it locks; route away from sharp edges and moving parts

The SWITCH, MAGNET is an OEM part for LG refrigerators. It is a switch designed to function in conjunction with the magnetic door seal, indicating to the refrigerator when the door is open or closed. This allows the refrigerator to regulate temperatures properly based on door positioning. 

Symptoms of a bad switch, magnet can include:

•  Temperature control issues, with the fridge struggling to maintain proper coolness levels
•  The fridge fails to switch to energy-saving modes when the door is closed 
•  Lights not turning on or off correctly when the door is opened or closed

Replace yours today with this genuine OEM LG part to ensure consistent and reliable temperature control. This OEM LG part is also compatible with Sears/Kenmore.

This hinge cover protects and conceals the door hinge area, restoring a clean, finished look and helping keep debris away from the hinge. Replace a cracked, loose, or missing cover to refresh appearance and protect the hinge.

• Conceals exposed hinge hardware for a neat, finished appearance
• Helps shield the hinge area from dust and debris
• Helps prevent snags or rubbing around the hinge during door operation
• Common signs it's needed: cracked or broken plastic, loose/missing cover, cosmetic damage near the hinge

• Disconnect power to the appliance before servicing
• Open the door to access the hinge area; support the door if needed
• Remove the old cover by releasing its clips or screws; retain any fasteners
• Align the new cover and snap or fasten it in place; verify it sits flush and doesn't rub

This wire harness assembly routes and organizes the appliance's electrical connections, delivering power and signals between the control and other components. Replacing a damaged or burnt harness helps restore safe, reliable operation and reduce intermittent electrical issues.

• Distributes electrical power and signal paths for proper component operation
• Maintains correct wire routing and secure connector interfaces to prevent chafing or loose connections
• Failure symptoms can include no power/won't start, dead display or lights, intermittent operation, tripped breaker/fuse, or wiring-related error codes
• Visible damage such as melted connectors, brittle insulation, or arcing marks indicates replacement is needed

• Disconnect power before servicing; also shut off water or gas supplies
• Photograph original routing; move connectors one at a time to avoid miswiring
• Do not pull on wires—release locking tabs and seat connectors fully
• Re-secure with original clips/ties, keeping wiring clear of hot, sharp, or moving parts

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This upper hinge assembly secures the top of the refrigerator/freezer door and restores proper door alignment for reliable opening and closing. Replacing a worn or damaged hinge helps stop sagging, rubbing, and improper sealing. What it does:

• Supports the top of the appliance door and provides the pivot point for smooth door movement.
• Restores correct door alignment to improve sealing and help maintain internal temperature.
• Reduces noise, scraping, or rubbing caused by a bent or worn hinge.
• Prevents further strain on door seals and bottom hinge when properly installed.

• Disconnect power before starting and remove food from the door(s) as needed.
• Support the door while removing and installing the hinge; a second person may be required for heavier doors.
• Keep original fasteners if reusing; replace any damaged screws or bushings with OEM parts.
• After installation, check door alignment and operation; do not overtighten fasteners.

A small plastic hinge cap that covers and protects the refrigerator door hinge, keeping the hinge area tidy and helping prevent dirt buildup. Replaces damaged or missing caps to restore the door's finished appearance. What it does:

• Covers the exposed door hinge mount to protect it from dust and grime
• Helps maintain proper hinge alignment by keeping the hinge area clear
• Restores the cabinet's finished look when the original cap is cracked or missing
• Compatible with the corresponding LG hinge assembly and hardware

• One hinge cap

• Disconnect power to the appliance before performing service to avoid injury
• Remove any door trim or screws as required by your model to access the hinge cap
• Press or snap the cap into place over the hinge; replace damaged mounting clips if needed

This plastic freezer door hinge cover protects the hinge area and gives the freezer a finished look. It snaps into place to hide the hinge hardware and helps keep dirt and moisture away from the hinge assembly. What it does:

• Covers and protects the freezer door hinge and exposed hardware
• Helps prevent dirt, dust and moisture from contacting hinge components
• Restores finished appearance after hinge repair or installation
• Useful when replacing a worn, cracked or missing hinge cover

• One freezer door hinge cover

• Snap-on cover; usually installs without tools by pressing over the hinge post
• Remove any debris before installing to ensure a secure fit
• If hinge hardware is loose or damaged, replace/repair hinge first for proper alignment
• Disconnect power only if working near electrical components; otherwise power disconnection not typically required

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Fan Guide Assembly is an OEM component specifically designed for LG refrigerators equipped with rear evaporator fans. This assembly guides proper airflow within the refrigerator compartment.

Symptoms of a bad fan guide assembly include:

• Development of warm or cool spots inside fridge surfaces  
• Excessive frost or moisture buildup at specific locations
• Reduced temperature fluctuation stability 
• Abnormally loud fan operation sounds

Causes of failure can be damage allowing fan blade strikes, cracks reducing structural integrity over time, or accumulation of dust clogging air passages.  

Replace yours today with this genuine OEM LG assembly to maintain optimized cooling throughout storage areas. Smooth, balanced airflow preserves food freshness evenly. This replacement part is compatible with Frigidaire, GE, and Samsung models for factory fit and function. Proper air distribution helps maintain energy efficiency.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

The Hinge Assembly is an OEM component specifically designed for LG refrigerators. This assembly attaches to the center refrigerator door panel and allows for smooth opening and closing.

Symptoms of a bad hinge assembly include:  

• Loose or sagging doors that do not close properly 
• Difficulty opening/closing the refrigerator door
• Severe shaking or vibrations from uneven tension
• Scratches or damage to surrounding door/cabinet areas

Causes of a worn hinge assembly can include normal wear from years of use opening/closing the heavy door. Moving components like hinges endure the stress that may loosen mounting points over time.

This OEM LG part is also compatible with Sears/Kenmore models. Replacing the hinge assembly restores proper balance and tension for easy access to your LG refrigerator. Regular maintenance ensures long-lasting performance.
 

This rail holder secures the microwave door rail so the door stays aligned and operates smoothly. Replaces a worn or broken holder to reduce door wobble and improve closing action. What it does:

• Secures and supports the door rail assembly for proper door alignment
• Keeps the rail from shifting, preventing rubbing, rattling or uneven gaps
• Helps restore smooth opening and closing of the door
• Fits where the rail mounts to the door frame or trim

• One rail holder

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools (screwdriver/trim tool) and handle plastic parts gently to avoid breakage
• Inspect surrounding clips/rails for damage and replace if needed for a lasting repair