Lrg5115st Parts

Restore reliable flame performance with this replacement burner. It mixes and distributes gas to produce the cooking flame on your appliance, helping it light consistently and deliver even, controllable heat during everyday use. What it does:

• Directs gas through burner ports to form a controlled cooking flame
• Replaces burners that are cracked, warped, corroded, or clogged
• Can help resolve weak/uneven or yellow flames and delayed ignition
• Restores stable simmer and more even heat distribution

• Includes 1 burner

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Access the burner per your model's procedure; remove any grates/caps and retaining hardware if applicable
• Position the new burner over the orifice and igniter; ensure it sits flat and properly aligned
• Reassemble and restore gas/power; test for proper ignition and flame pattern

The Griddle Plate is an OEM part for LG gas ranges. It is responsible for providing an even cooking surface for griddling meats, pancakes, and other foods that benefit from direct contact cooking. 

Causes of a bad griddle can include warping or pitting over time due to high heat exposure. Common food residues not removed after cooking can lead to build-up and sticking issues. 

Symptoms of a bad griddle include:

• Uneven or hot spots during cooking  
• Foods sticking or burning easily
• Difficult to clean, residue not removing
• Dents, cracks or broken knobs/handles

This OEM LG part is also compatible with Sears/Kenmore models.

Replacement nozzle that restores the outlet routing on compatible LG appliances. Installs into the existing mounting location to replace a worn, cracked, or damaged nozzle and helps reduce leaks and misdirected flow. What it does:

• Directs the appliance's outlet flow and helps form a clean seal at the exit point to reduce drips and splashes.
• Commonly replaced when the nozzle is cracked, loose, clogged, or missing.
• Can improve dispensing consistency and reduce misdirected flow or minor leaks.
• Fits into the OEM mounting location.

• Disconnect power and/or water supply before removing panels or working on the appliance.
• Remove any trim or access panels to reach the nozzle; small clips or screws may secure it.
• Handle plastic parts gently to avoid cracking; confirm correct orientation and fit before reassembly.

This gas valve assembly controls gas flow to the appliance's burner, restoring reliable ignition and heating when the original valve fails. It replaces a faulty or leaking valve to help the unit heat safely and consistently. What it does:

• Regulates and routes gas to the burner based on the appliance's control signals
• Prevents gas flow when the appliance is off or during safety shutoff conditions
• Commonly used to address symptoms like no heat, weak heating, or a persistent gas smell when confirmed at the valve
• Works as the appliance's primary gas control component in the fuel delivery system

• One gas valve assembly

• Turn off gas supply and disconnect power before servicing; verify both are isolated
• Inspect all gas fittings and use an approved leak detection method after installation
• Do not modify the part; use proper tools and follow manufacturer service instructions

This Main PCB manages and coordinates the appliance's electronic functions so your unit responds to user controls, runs selected cycles, and displays status. Replacing a failed board restores proper control and communication. What it does:

• Interprets user inputs and sends signals to motors, valves, heaters, and displays
• Controls timing and cycle sequencing to run selected operations
• Communicates error codes and status to the user interface
• Stops operation or prevents starts when critical faults are detected
• Corrects symptoms caused by intermittent or complete control failure

• Disconnect power at the breaker and unplug the appliance before starting
• Take photos of wiring and connectors to ensure correct reconnection
• Handle the board carefully; avoid static discharge and bent pins

This gas surface burner head restores even flame and reliable lighting on your range cooktop. Replacing a worn or clogged burner helps bring back proper ignition, flame pattern, and consistent heat output. What it does:

• Directs gas from the orifice through precisely formed ports to create an even ring of flame
• Works with the spark igniter for quick, consistent ignition
• Helps maintain correct flame size and color for efficient cooking
• Typical symptoms include: burner won't light, delayed ignition, weak/uneven flame, or yellow-tipped flames

• Includes 1 burner head

• Disconnect power and shut off the gas supply before servicing
• Remove grate and burner cap; lift off the old burner head and clean the mating surface
• Align the new burner head over the orifice and ensure proper clearance to the igniter
• Reassemble, restore gas/power, and test burner operation and flame pattern

This grille assembly replaces a damaged or missing front trim piece to restore your refrigerator's finished look and airflow at the base. Durable plastic construction keeps the lower front panel secure and neat. What it does:

• Covers and protects the refrigerator kick/vent area from dust and debris
• Maintains proper airflow to condenser components (helps reduce rattling from loose trim)
• Restores cosmetic appearance when original grille is cracked, broken, or discolored
• Secures to the cabinet with factory clips or screws to prevent gaps and movement

• Disconnect power to the appliance before beginning work
• Removal and installation typically require removing toe kick or lower access panel and releasing retention clips or fasteners
• Handle plastic trim carefully to avoid breaking tabs; replace any damaged clips

Hinge assembly that secures and pivots the appliance door for smooth, stable operation. Restores proper alignment and sealing to reduce sagging, rubbing, and help the door close evenly. What it does:

• Supports and guides the door pivot to maintain correct opening and closing motion.
• Restores proper door alignment and sealing to improve performance and reduce leaks or cold spots.
• Reduces sagging, rubbing, and noisy or stiff door movement.
• Helps the door latch and close evenly for reliable use.

• Always disconnect power (and water supply, if applicable) before starting repairs.
• Support the door before removing the old hinge to prevent dropping or damage.
• Use appropriate hand tools; avoid forcing parts and do not overtighten fasteners.

A factory screw for securing specified components in your appliance. Replaces a missing or damaged fastener to restore a tight, reliable hold and help reduce vibration, rattling, and misalignment.

• Secures brackets, covers, or internal assemblies where this exact screw is specified by the manufacturer
• Useful when the original screw is missing, stripped, or corroded
• Helps eliminate looseness, vibration, and rattling noises
• Matches the original fastener for proper fit and thread engagement

• Disconnect power (and shut off water supply if applicable) before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace any damaged clips or inserts to ensure a secure repair

The Knob Assembly is an OEM part for LG ranges. It includes the knobs that control the range burners. The knob assembly is responsible for selecting the exact burner level needed, from low to medium to high. 

Causes of a bad knob assembly can include general wear and tear over time, damage from excessive heat exposure, or accidental mishandling of the delicate knob mechanisms. 

Symptoms of a bad knob assembly include: 

• Knobs difficult to turn or adjust burner levels
• Improper or inconsistent burner temperature response  
• Knobs detaching from the range surface
• Inability to turn burners off completely

Replace yours today with this genuine OEM LG knob assembly to restore complete and reliable burner control. This LG replacement part is also compatible with Sears/Kenmore.

This parts assembly is a replacement module that restores the specific component group in compatible LG appliances, helping return the affected feature to normal operation. Use it to replace a worn or failed factory assembly. What it does

• Replaces a multi-piece component assembly used in the appliance's subsystem.
• Restores function when the original assembly shows signs of failure or intermittent operation.
• Common symptoms it can address: subsystem not responding, intermittent errors, or a feature that no longer operates reliably.
• Designed to match the original OEM form and connectors for a direct replacement.

• Disconnect power and water before starting any service.
• Handle connectors and wiring carefully; match connectors and routing to avoid pin damage or misalignment.
• Reuse factory mounting hardware unless replacement fasteners are required.
• Follow the OEM instructions for safe, correct installation.

This gas valve assembly controls gas flow to the oven and burners so the range heats properly and maintains safe operation. Replace a failed valve to restore ignition and regulated gas delivery. What it does:

• Regulates gas flow to the oven/burner when the appliance calls for heat
• Enables proper ignition and sustained burner/oven flame
• Common symptom: oven or burners won't heat or light even when controls are set
• Can cause clicking or continuous ignition attempts when valve sticks or fails

• Turn off gas supply and unplug the appliance before starting repairs
• Check all fittings for leaks after installation using a soap solution or approved leak detector
• Do not force connections; replace any damaged seals or tubing to ensure safe operation

This PCB assembly replaces the appliance's main electronic control board to restore reliable control of functions and user interface. It handles the unit's logic and electrical signals so the appliance can operate correctly. What it does:

• Manages electronic controls and timing signals for the appliance
• Enables display, keypad, and user-interface communication
• Controls outputs for motors, valves, relays and other powered circuits
• Helps resolve intermittent operation, unresponsive controls, or error-code behavior
• Restores proper function when faulty electronics prevent normal operation

• Disconnect power before starting — risk of shock or damage
• Handle the board by the edges and avoid static discharge (use gloves or a grounding strap)
• Keep track of mounting screws and connector orientation for reassembly

This tapping screw secures appliance panels, brackets, and trim. Replace a missing or stripped fastener to restore a tight, rattle-free fit and keep components properly aligned.

• Cuts its own threads as it drives (self-tapping) to fasten metal or plastic components securely
• Helps eliminate looseness and vibration noises when an original screw is missing or damaged
• Typical signs you need this part: loose or rattling panels, gaps/misalignment, or covers that won't stay secured
• Direct replacement for the original fastener in the same location

• Disconnect power; turn off water or gas supplies before service
• Start the screw by hand to avoid cross-threading, then tighten with the correct driver
• Align parts fully before tightening and avoid overtightening, especially into plastic
• Reuse any original washers or clips that were installed with the screw

This water inlet valve controls water flow to the ice maker and dispenser, restoring proper fill and supply so your refrigerator can make ice and deliver water on demand. Replaces a failed or leaking valve to stop drips and restore normal operation. What it does:

• Opens and closes to allow water into the ice maker and dispenser when requested
• Stops water flow to prevent overfilling and leaking when closed
• Commonly replaces valves that cause no water dispensed, slow fills, or continuous leaking
• Operates as the sealed solenoid valve that the refrigerator's control uses to meter water

• Disconnect power and shut off the water supply before starting any repair
• Replace only with the exact part number shown for fit; secure all water and electrical connections
• After installation, turn on water and power, then check for leaks and proper fill operation