Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped working or won't cycle? This complete assembly restores automatic ice production when cubes stop forming or the unit fails to eject ice.
Structural bracket that secures internal components in your refrigerator. Replace if cracked, broken, or worn to restore proper alignment and stability.
Installed new screws. Read more
Fix error code CF, warm spots, or inconsistent cooling with this evaporator fan motor. DIYers complete this repair in about 30 minutes with basic tools.
Removed the old fan housing. Removed the fan from its housing and took the fan blade off. I then smelled the fan and it smelt of burnt insulation. I ordered a new fan and re-assembled in reverse order. Fan started up when compressor fired up. Fan was a plug & play item. Erroe Code cleared on the front and refrig is working fine. Only thing was the fan was not identical with the old one. It fit in the enclosure the same and the shaft was the same length. My old fan was 10 years old and they... Read more
Upper hinge assembly for refrigerator doors. Mounts at the top to support and pivot the door. Replace if hinge is worn, cracked, or broken to restore alignment.
Ordered gasket and hinges. Hired an appliance repair contractor to change out the old ones. It's fine now. Read more
Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.
Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Refrigerator won't start or stops running? A failed capacitor disrupts motor circuits. This film radial capacitor restores voltage stability and operation.
For an emergency fix I installed a 3 in1 kit disabling the original start cap and wiring in the original run cap to the run winding. Ordered the proper PTC and overload from Appliance Parts Pros and installed them 2 weeks later. The original start and run capacitor were good, rewired back to design specs. The original PTC had pins 1,2 and 3, the replacement had 2,3 and 4. Only wiring change was to install the red wire from pin 1 on the original PTC to pin 4 on the new PTC. Read more
Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.
Replacement door stopper assembly that cushions and limits door travel. Installs at the hinge area. Needed when original is cracked, broken, or missing.
Silver drip tray for side-by-side refrigerators. Replaces cracked, discolored, or missing trays. Measures 9.5 inches wide by 5 inches deep.
Replaced rubber cover Read more
Replace your refrigerator's cracked or discolored light lens cover to restore even illumination and protect the bulb from spills and impact. Confirm fit.
The lamp cover and freezer door gasket were simple to replace, however before doing the repairs I discovered that the water line to the ice maker was leaking therefore I got help from a repair person at a local appliance store to fix the line and he also helped with the installation of the ice chute door....I would say the most difficult part was getting to the old ice chute door to replace as you have to be careful that you don't break one of the tabs holding the dispenser unit in place, but... Read more
Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.
Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.
Water pooling in your refrigerator? A cracked or clogged drain tube assembly causes leaks and ice buildup. Direct replacement part for proper drainage.
Black refrigerator door handle for replacing cracked, broken, or worn handles. Installs on refrigerator door exterior for smooth opening and closing.