Lud459el Parts

This nozzle assembly directs fluid or airflow where the appliance needs it, restoring proper dispensing or spray performance. Use this direct-fit replacement to address flow or alignment issues without replacing larger components. What it does:

• Directs and focuses fluid or air flow from the appliance outlet
• Helps restore proper dispense or spray pattern for normal operation
• Commonly replaced when flow is reduced, uneven, or the nozzle is damaged
• Works with the existing mounting and seals when undamaged

• One genuine-style nozzle assembly

• Disconnect power and/or shut off water supply before beginning work
• Inspect surrounding seals and gaskets; replace if cracked or deformed
• Typically installs with simple snap clips or a few fasteners—refer to your model's service instructions

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Hose Assy is an OEM component specifically designed for LG dishwashers. This hose works with the drain pump to effectively drain wash water from the dishwasher tub after each cycle. 

The drain hose assy is responsible for efficiently draining wash water during and after the dishwashing cycle. It allows used water to be drained properly, keeping the dishwasher tub and components clean and dry between cycles. 

Symptoms of a bad drain hose assy include:

• Incomplete draining of wash water after cycles
• Water remaining or pooling in the bottom tub 
• Leaks or puddling near the drain pump or hose area
• Loud noises or vibrations from the drain pump

This OEM LG part is also compatible with select Sears/Kenmore.

The Pump Casing Assembly is an OEM part for LG dishwashers. It houses critical components such as the circulating pump motor that spreads water throughout the tub during cycles. The durable and corrosion-resistant casing safeguards internal mechanisms.  

Causes of a faulty pump casing include cracking, leaks, or corrosion compromising its protective barrier over time. Mineral deposits can also affect motor performance.

Symptoms of a bad pump casing assembly are:

• Water leaks around or inside the dishwasher 
• Failure to completely purge water after draining
• Poor water distribution leaving dishes uncleaned
• Strange clicking or grinding sounds 

This OEM LG part can also be used on Kenmore/Sears appliances. 
 

The LG Dishwasher Parts Assembly is an OEM component specifically designed for LG dishwashers. This comprehensive assembly includes many interior dishwasher components working together as a system. 

Symptoms of a bad parts assembly include:

• Improper water circulation within the dishwasher 
• Arm or spray assembly not rotating or spraying correctly
• Filter or sump area clogged or dirty more frequently
• Noisy unwanted sounds coming from interior areas
• Damage or cracks found in internal tub components

Causes can be mineral buildup obstructing moving parts, wear from years of use and high heat, or broken or damaged features affecting overall operation.

The Fill Funnel Gasket is an OEM part for LG dishwashers. It is located inside the fill funnel that pours water into the dishwasher during cycles. The gasket seals around the fill funnel to prevent leaks and direct water as intended. 

Symptoms of a bad fill funnel gasket include:

• Water leaking from the fill funnel area into the interior tub during washing cycles
• Puddles forming inside the tub, not related to normal operation  
• Gaps or tears appearing where the funnel meets the surrounding gasket seal

Causes of a bad fill funnel gasket can be wear and tear over time if the funnel is moved often during loading or maintenance. Chemical residue or mineral buildup could also deteriorate the rubber material.

This replacement part is also compatible with Sears/Kenmore models for simple installation and reliable repairs.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

The Holder is an OEM part for LG dishwashers. This clip is designed to secure the tine rows in place, ensuring that your dishes and utensils are held securely during the washing cycle. It provides a reliable hold for the tine rows, preventing them from shifting or falling out during operation.

Symptoms of a bad retainer clip include:

• Loose or wobbly tine rows
• Difficulty in loading or unloading dishes
• Missing or lost retainer clips

A bad retainer clip can occur due to wear and tear, damage, or loss. If you notice symptoms such as loose or wobbly tine rows, difficulty in loading or unloading dishes, or missing retainer clips, it's time to replace the the faulty or missing retainer clip with this genuine OEM part.

This OEM LG part can also be used on Kenmore/Sears appliances. 
 

The Drain Pump Case Assembly is an OEM replacement part for LG dishwashers. This component houses the drain pump, which is responsible for removing water from the dishwasher tub during the drain cycle.

Causes of a bad drain pump case assembly can include physical damage or cracks in the case, worn-out seals or gaskets, or issues with the internal components, such as the pump impeller or motor.

Symptoms of a bad drain pump case assembly include:

• Water not draining from the dishwasher tub
• Loud grinding or humming noises during the drain cycle
• Leaks around the pump area
• Error codes or indicators related to drainage problems

This OEM LG part is also compatible with Sears/Kenmore dishwasher models.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

The Rail Assembly is an OEM part for LG dishwashers. This rail assembly supports the upper dish rack and guides it smoothly in and out of the dishwasher.

Causes of a bad rail assembly include wear from repeated rack extension and retraction over many cycles, damage due to overloading racks, or impact that has bent rail components out of proper alignment.

Symptoms of a bad rail assembly include:

• Upper rack not smoothly rolling in and out of the dishwasher
• Binding, catching, or loud noises when operating the upper rack
• Rack unable to fully extend or retract as designed
• Rack unable to stay securely locked in closed position

This LG part is also compatible with some Kenmore models.