Maytag Mah 6500 Aww Parts

This bolt-style retaining screw secures appliance panels and components to prevent movement and rattling. A small but critical fastener that restores proper fit and reduces noise from loose parts. What it does:

• Fastens and secures panels, brackets, or assemblies in place
• Stops rattling or vibration caused by a missing or loose screw
• Restores proper alignment of the attached component
• Matches OEM fit and thread pattern for a secure hold

• Disconnect power and unplug the appliance before beginning any work
• Use the correct screwdriver or socket to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or plastic parts
• Keep small parts away from children and work on a clean, well-lit surface

This is a replacement #8-18 screw used to fasten components in compatible Whirlpool appliances. It restores worn or missing fasteners so panels and parts stay securely mounted and function safely. What it does

• Secures panels, brackets, and small appliance components to the frame or mounting points
• Restores proper fit where a stripped, missing, or corroded screw causes rattling or loose parts
• Provides the correct thread engagement to prevent backing out under normal use
• Small fastener intended for interior and light-duty exterior appliance applications

• One #8-18 screw

• Use the matching screwdriver or bit to avoid damaging the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic parts
• Replace any damaged mating clips or inserts for a secure repair
• Disconnect power and follow appliance safety instructions before accessing internal components

This grommet seals and cushions the dryer/refrigerator vent tube where it passes through the cabinet, helping prevent air leaks and reduce vibration noise. It restores a tight vent connection for proper airflow and quieter operation. What it does

• Provides a secure, flexible seal around the vent tube to reduce air leaks.
• Cushions the vent tube to minimize vibration and rattling during operation.
• Helps maintain proper airflow by keeping the vent connection aligned.
• Commonly replaced when cracked, torn, or excessively worn.

• One vent tube grommet.

• Turn off and unplug the appliance (or disconnect power) before starting any repair.
• Access may require removing the back panel or interior trim—follow your model's service instructions.
• Inspect surrounding vent tubing and fasteners; replace any damaged components for a complete repair.

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring reliable ice and chilled-water delivery when the valve or solenoids fail. It fits in the OEM plumbing assembly and replaces a worn or leaky valve. What it does

• Opens and closes water flow to the ice maker and dispenser when energized by the control board.
• Restores water delivery if the dispenser or ice maker is not filling.
• Stops water flow when leaking or when solenoid coils fail.
• Helps prevent intermittent dispensing caused by a stuck or partially closed valve.

• One water inlet valve assembly.

• Disconnect power and shut off the water supply before starting work.
• Relieve water pressure and use a towel to catch residual water when disconnecting lines.
• Inspect and replace any damaged water tubing or fittings and hand-tighten fittings to avoid leaks; follow OEM torque recommendations if available.

This coin drop is the front-panel coin acceptor that routes payment into a coin-operated washer or dryer, restoring reliable coin detection and machine start functionality. Designed to fit Greenwald-style coin mechanisms. What it does:

• Guides coins into the coin mechanism so the machine can register payment
• Helps prevent coin jams and misfeeds that stop cycle starts
• Restores proper coin sensing when worn or damaged
• Works with the existing coin box and latch assembly on compatible machines

• One coin drop assembly

• Disconnect power and follow lockout/tagout before accessing the control panel
• Remove the front panel or coin box cover to access mounting screws and wiring
• Align the drop with the coin path and secure fasteners; test coin acceptance after reassembly

A replacement 3/8-16 nut that secures fasteners and assemblies on compatible Whirlpool appliances. Restores proper fastening so panels, brackets and components stay tight and aligned during normal operation. What it does:

• Fastens and secures bolts, studs or threaded shafts in appliance assemblies.
• Prevents loose connections that can cause rattling, vibration or misalignment.
• Used where a 3/8-16 threaded nut is required for structural or mounting applications.
• Replaces missing, stripped or corroded nuts to restore reliable mechanical connection.

• Disconnect power and follow all appliance safety procedures before servicing.
• Inspect mating threads and remove debris; replace if threads are damaged.
• Thread onto bolt or stud by hand first, then snug with the correct wrench; avoid overtightening.
• Follow the appliance manufacturer's torque and assembly instructions.

A replacement latch spring that helps the appliance door latch return and hold securely, restoring reliable door engagement and proper cycle starts. Fits the original latch mechanism and installs quickly for common latch-related issues. What it does:

• Provides tension for the door latch so the strike stays engaged during operation
• Restores proper door closing and helps prevent door from popping open mid-cycle
• Commonly used when the latch feels loose, the door won't stay closed, or cycles won't start
• Works with the appliance's existing latch assembly to return the latch to its resting position

• One spring for the door latch

• High-level replacement: remove access panel or door trim to reach the latch assembly
• Handle spring under tension carefully and wear eye protection to avoid injury
• If other latch components are damaged or worn, replace the entire latch assembly for a reliable repair
• Unplug the appliance or disconnect power before starting any repair

This dispenser lid is the replacement top cover for the washer detergent/softener dispenser assembly, restoring a clean, secure closure and proper dispensing of laundry products. It replaces cracked, broken, or missing dispenser covers. What it does

• Covers and protects the dispenser cavity to keep detergent and fabric softener contained
• Helps ensure detergent flows into the wash tub as intended rather than spilling onto the top of the cabinet
• Commonly replaced when the lid is cracked, warped, broken, or won't close securely
• Matches OEM form for a direct-fit replacement in compatible dispenser assemblies

• One dispenser lid

• Always disconnect power to the appliance before servicing
• Installation generally requires basic hand tools and aligning the lid to the dispenser housing until it snaps or secures into place
• Inspect surrounding dispenser components and gaskets during replacement; replace any additional damaged parts as needed

This dispenser bezel is the exterior trim piece that surrounds and protects the refrigerator dispenser area, restoring a clean appearance and proper fit so cups and containers align with the dispenser outlet. What it does:

• Provides the finished trim around the dispenser opening and helps guide cups to the water/ice outlet
• Covers and protects internal dispenser components from damage and debris
• Restores proper alignment and appearance when the original bezel is cracked, chipped, or broken
• Helps prevent small items from getting behind the dispenser area

• One dispenser bezel

• Disconnect power (and water supply if needed) before starting work to prevent shock or leaks
• Removal/installation may require removing the dispenser front assembly or fasteners; keep track of screws/clips
• Handle the bezel carefully to avoid scratching the finish during installation

This motor control assembly operates the washer's drive motor to manage spin and agitation cycles, restoring proper motor response and cycle operation when the original control fails. What it does:

• Regulates motor speed and direction for agitate and spin functions
• Enables motor start/stop commands from the main control board
• Works as the replacement electronic module that sends power and control signals to the motor

• Disconnect power before replacing; follow all safety precautions to avoid shock
• Handle the board and connectors carefully to avoid ESD or connector damage
• Compare new part to the old unit for correct connector layout and mounting

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

• Fastens panels, trim, or mounting brackets to restore proper alignment
• Helps eliminate rattling or vibration caused by loose or missing screws
• Replaces corroded or damaged hardware to maintain safe operation
• Restores secure attachment for parts that no longer hold in place

• Disconnect power to the appliance before starting any repair
• Use the correct driver bit to avoid stripping the screw head
• Tighten until snug; avoid overtightening which can strip threads or damage parts

This replacement airdome hose restores the pressure/air connection used by the appliance's water/air sensing system, helping maintain proper cycle control and preventing response issues caused by a damaged or cracked hose. What it does

• Transfers air/pressure between the airdome and sensor or control assembly to enable accurate water-level or vent sensing.
• Prevents false readings or erratic cycles that can occur when the hose is cracked, pinched, or disconnected.
• Restores an airtight path so controls can respond correctly during fill and drain operations.
• Helps reduce the risk of overflow, extended cycles, or no-start symptoms related to pressure-sensing faults.

• One airdome hose (single replacement hose as pictured)

• Turn off power and water to the appliance before attempting service.
• Inspect connection ends for matching fit; trim or replace clamps only if specified by the manufacturer.
• Reconnect securely to both fittings and check for pinches or kinks that could affect function.

This small tube of Molykote lubricant helps reduce friction on moving appliance parts for smoother operation and quieter performance. Use it where the manufacturer specifies a silicone/grease lubricant to restore proper movement and limit wear. What it does:

• Lubricates bearings, rollers, hinges, and other sliding contacts to reduce noise and friction
• Helps parts move more smoothly and can prevent rough operation or squeaks
• Can protect metal-on-metal contact from premature wear when applied as directed
• For use only in areas the manufacturer specifies for Molykote-type lubricants

• Apply sparingly to the specified contact points; excess can attract dirt or drip onto other parts
• Wear gloves and avoid skin/eye contact; wash hands after use
• Keep out of reach of children and store in a cool, dry place

This door hinge secures and guides a refrigerator door, restoring proper alignment and smooth opening/closing. Replaces a worn or damaged hinge to reduce sagging, rubbing, or uneven gaps and help maintain a tight door seal. What it does:

• Provides the pivot point that supports and aligns the refrigerator door
• Restores correct door height and gap to prevent rubbing or catching
• Helps the door close fully to maintain proper temperature and efficiency
• Reduces sagging or drooping that can cause seal and cooling issues

• One door hinge

• Disconnect power to the appliance before beginning any repair to avoid electrical hazards
• Support the door during removal/installation to prevent injury or damage to the cabinet
• Use the same fasteners provided or retained from the original hinge; torque per manufacturer guidelines
• Adjust hinge position per service instructions

This pressure switch senses and signals the washer's water level so the machine fills and cycles correctly. Replacing a failing switch restores accurate water-level sensing for consistent wash performance. What it does:

• Monitors tub water level and signals the control board to start/stop filling.
• Helps the washer advance through fill, agitate, and drain cycles based on detected water height.
• Common symptom: washer overfills, underfills, or fails to advance cycles.
• Works with existing pressure hose and wiring harness to relay air pressure changes.

• Disconnect power and water to the appliance before beginning any work.
• Note and photograph hose and wiring positions before removal to ensure correct reinstallation.
• Inspect or replace the small pressure hose if cracked or clogged; ensure a tight, leak-free connection.