Maytag Mgr6775bdq Range Parts

Used thick pad on kitchen table to hold oven door. Open door to first position (broil) and used soft leather gloves to lift up and remove. Door is heaver than it looks. Used screw driver to remove all screws from bottom and side trims. Removed side trims then bottom trim. It was not part of the repair, but I removed front glass to clean. There was some rust stuck on the glass from the old trim. Need to watch position of little spacers that are under the glass. With front glass in place,... Read more

First I remove screw on the mounting housing than I remove the panel of the back of the oven so I could trace the property wire the from the light housing than after locating the hook up location I put a colthing hanger through lamp assy opening in stove fish the wiring harness hook up and than mounted the lamp assy. all ok But I would reccoment that person would replace both lamp assy so a to have a strong light present Read more

I bought the black grates that won't show every little drop of grease even if I do wipe them down regularly. Read more

Ordered the parts from appliance parts pros and installed parts I did have to drill out the existing screws holding the existing orfice holders as the existing screws were rusted out Read more

1. Turn oven breaker off. 2. Slide oven out from wall. 3. Remove top oven door. 4. Remove side panels from the oven. 4.a Remove screws from back of oven. 4.b Remove two screws that hold stove top. 4.c Slide stove top a few inches to unplug stove electrical plug. Remove stove top. 4.d Remove screws on top of side panels. 4.e Slide the side panel forward and up to remove. 5. Remove fastener on the front of oven that holds the hinge in place. Remove hinge. 6. Install new hinge and install... Read more