Maytag Pye/G4500 Parts

This replacement basket bottom assembly restores the lower basket's support and containment so stored items sit securely and the basket functions as intended. It's a direct-replacement part used when the basket floor is cracked, warped, or broken. What it does:

• Replaces the lower/bottom section of the basket to restore proper support and prevent items from falling through
• Stabilizes the basket so it rolls and seats correctly
• Stops rattling or sagging caused by a damaged or missing basket bottom
• Useful when the basket floor is cracked, split, or has broken support ribs

• Disconnect power to the appliance before any service; follow the manufacturer's safety instructions
• Remove the basket or access panel as needed to reach and replace the bottom assembly
• Inspect surrounding mounting tabs and rails for damage; replace any worn hardware for a secure fit
• Use basic hand tools.

The Vegetable Pan Assembly an OEM part for GE refrigerators. This assembly is specifically designed to fit on the right side of your refrigerator's vegetable pan, offering a convenient storage solution for your fresh produce. It provides a designated space to keep your produce separate and easily accessible, helping to maintain their freshness and quality.

A bad vegetable pan assembly can occur due to accidental damage, wear and tear, or other factors. If you notice symptoms such as cracks, broken tabs, or a loose fit on your current assembly, it may be time to replace it with a new one.

Symptoms of a bad vegetable pan assembly include:

• Cracks or damage
• Broken tabs
• Loose fit on the pan

Improve the organization of your fresh produce by replacing the faulty vegetable pan assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Door Board is an OEM component designed for GE bottom-mount refrigerators. Located inside refrigerator doors, it operates essential LED functions for interior lighting and temperature displays. Properly illuminated shelves and accurate temperature readings depend on a functioning door board.

Causes of failure can include loose wiring connections from repeated door openings, fluid damage allowing corrosion over time, or failure of electronic components on the printed circuit board.

Symptoms of a defective door board are:

• Dim or unlit interior lighting 
• Inoperative temperature display
• Strange odor or sparks coming from the door area

Replacing with this genuine GE part restores bright illumination and easy temperature monitoring. Compatible with Hotpoint, RCA, and Kenmore side-by-side models as well.

Left hand side.

This 10-24 threaded screw secures appliance components that use a #10 machine screw. It provides reliable fastening for panels, brackets, and assemblies so parts stay aligned and stable during normal use and service. What it does:

• Fastens panels, brackets, or assemblies that accept a 10-24 machine screw
• Maintains alignment and structural connection under normal operating loads
• Replaces worn, stripped, or missing screws to restore secure mounting
• Works with sheet-metal and component mating nuts or threaded inserts commonly used in appliances

• One 10-24 threaded screw

• Power tools can be used; avoid overtightening to prevent stripped threads or damaged components
• Disconnect power and follow all safety steps for your appliance before servicing
• Ensure proper engagement and torque to avoid damage

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

A replacement fresh-food door handle that restores a secure grip and the finished look of the refrigerator door. Fits stainless finishes and replaces worn, cracked, or damaged handles to make daily use easier. What it does:

• Provides a sturdy grip for opening the fresh-food compartment door
• Replaces handles that are cracked, loose, or cosmetically damaged
• Restores proper alignment and ease of door operation when the original handle is broken
• Matches stainless finishes for a factory look

• Designed for direct replacement; use the factory mounting screws and brackets already on the door when present
• Turn off water/ice supply and empty door bins if they obstruct access before starting
• Handle small hardware carefully; keep screws and trim pieces together to avoid loss

This port collar is a small trim/support piece used on select refrigerators. It reinforces the port opening and helps secure the mating tube or component for proper alignment, a snug fit, and a clean, finished appearance.

• Supports and spaces the port/opening where a tube or component passes through the cabinet or liner
• Helps maintain alignment and a secure fit to minimize gaps or vibration
• Replace if the collar is cracked, warped, or missing
• Symptoms can include a loose connection at the opening, rattling, or a visible gap or misalignment

• Unplug the refrigerator; shut off the water supply if working near water lines
• Use your model's parts diagram to access the port; remove any trim, clips, or screws
• Note orientation; press or snap the new collar into place and transfer any seals if present
• Reassemble and restore power; verify proper fit and operation

Manufactured by GE, this is a compressor kit for a refrigerator. The compressor's job is to pressurize the system and warm the refrigerant while propelling it through the rest of the cooling system. The compressor is controlled by a thermostat inside the refrigerator. When the thermostat detects a high temperature, the compressor engages, helping to cool the refrigerator and preserve food.Compressors are the core of the refrigeration system. There are also subject to a great deal of wear and tear through normal cycling on and off. In addition, compressors can be damaged if they run out of oil, if contaminants enter the system, and through exposure to prolonged operation due to a faulty thermostat or low refrigerant levels. When the compressor fails, the refrigerator will no longer be able to maintain a safe temperature for food. This is a complete replacement kit.This kit is a genuine OEM part and is sold individually. It is only compatible with GE refrigerators.

8-18 hi/lo 5/8

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

This is a replacement round-head 10-32 x .353 screw used to fasten appliance panels and internal components. It restores secure mounting and helps stop rattling or loose parts caused by missing or worn fasteners. What it does:

• Secures panels, brackets, or small assemblies where a 10-32 machine screw is specified
• Stops movement and vibration that can cause noise or misalignment
• Replaces missing, stripped, or corroded fasteners to restore proper fit
• Matches the original fastener size and head style for correct clearance

• One 10-32 x .353 round-head screw

• Use the matching driver (typically a Phillips or slotted driver as required by the head) and avoid over-torque to prevent stripping
• Disconnect power and follow safety procedures when accessing internal components
• If other fasteners appear damaged or corroded, inspect and replace as needed

This element holder assembly secures an oven/range heating element and keeps it positioned for even heat delivery. It restores proper element alignment to reduce arcing and prevent rubbing or uneven baking. What it does:

• Secures the bake or broil heating element to the range/oven housing
• Keeps the element properly spaced for consistent heating performance
• Helps stop element movement, rubbing, or intermittent contact that can cause arcing
• Commonly replaced when the element is loose, misaligned, or makes noise during operation

• Disconnect power to the appliance before beginning any repair
• Handle heating elements carefully—sharp edges and fragile terminals can be damaged
• Verify element alignment and secure mounting hardware; replace only as needed
• If you see damaged element terminals or insulation, replace the element

This single-serve brew module is the internal assembly that routes water and brews single-cup servings in compatible GE single-serve coffee systems. Replacing a worn or failed brew module restores normal brewing function and consistent cup quality. What it does:

• Directs hot water through the brew chamber to extract coffee grounds or pods
• Opens and closes internal valves to control water flow during a brew cycle
• Restores brewing when unit stops mid-cycle, fails to dispense water, or brews weak/unfinished cups
• Works as the core mechanical brew group for single-serve operation

• Disconnect power and water before beginning service
• Handle the assembly carefully; avoid bending or stressing plumbing/valve connections
• Basic hand tools and moderate disassembly of the coffee unit are typically required
• After installation, run a water-only cycle to flush and verify proper operation

Replacement mat module that restores mat-sensing and control functions in compatible appliances. Installs in the mat/sensor assembly to help the appliance detect mat input and respond correctly. What it does:

• Interprets signals from the mat/sensor assembly and communicates those signals to the appliance control system.
• Replaces a damaged or failed module that can cause unresponsive mat inputs or intermittent mat-related operation.
• Helps resolve mat/sensor error codes or persistent mat-detection faults when the module is the failed component.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle the module carefully and avoid touching circuitry or connector pins to prevent damage from ESD or contamination.

This electronic control board is the appliance's main logic module that manages cycles, timers and user controls so your unit operates as commanded. Replacing a faulty board restores control functions and reliable cycle operation. What it does:

• Regulates main functions like cycle selection, timing and user-interface signals
• Processes inputs from buttons, sensors and door switches to start/stop cycles
• Prevents erratic or unresponsive controls when the original board fails
• Resolves symptoms such as no display, unresponsive controls, or appliances that won't start

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the board by its edges and avoid static discharge; use a grounded strap if available
• Verify connectors match and seat firmly; do not force connections