Mdb8989shko Parts

Replacement silverware/cutlery basket that organizes forks, knives and spoons during dishwasher cycles. Restores secure utensil storage in the rack so small items stay contained and are less likely to fall through or nest during washing. What it does:

• Holds silverware and cutlery upright to improve wash exposure and reduce nesting.
• Keeps small items contained so they don't drop to the tub or block the spray arm.
• Helps organize utensils for easier loading and unloading.
• Designed for use in compatible dishwasher racks and detergents.

• Usually installs without tools — slide or set into the lower rack and verify it sits securely.
• Remove the lower rack for easier positioning; ensure the basket does not obstruct rack movement or spray arms.
• Handle sharp utensils carefully during installation and service.
• Refer to your appliance's OEM instructions for model-specific placement and safety information.

This cabinet cover replaces a damaged or missing outer panel to protect internal components and restore the appliance's appearance. It helps keep wiring and parts shielded from dust, debris and accidental contact. What it does:

• Shields internal components and wiring from dust, pets and spills
• Restores a finished outer appearance when the original cover is cracked, bent or missing
• Helps prevent accidental contact with moving or live parts behind the cabinet
• Can reduce drafts and limit debris that affect internal components

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use common hand tools (screwdriver, nut driver) and keep track of fasteners
• Wear gloves to protect against sharp sheet-metal edges and work safely
• Follow OEM service instructions for alignment and proper fastening

This replacement wire/harness pigtail delivers a reliable electrical connection between components to restore proper operation and safety. Use it to replace damaged or corroded wiring that causes intermittent power or component failure. What it does:

• Provides a single, pre-terminated wire/harness connection for appliance circuits
• Restores proper electrical continuity when original wire is frayed, burned, or broken
• Helps eliminate intermittent operation, shorts, or components that won't receive power
• Matches OEM fit and termination style for a direct replacement

• One replacement wire/harness pigtail

• Disconnect power to the appliance before attempting any repair
• Verify correct routing and secure connections to avoid pinching or chafing
• Use appropriate tools and, if needed, refer to the appliance wiring diagram

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This replacement lid restores the top cover on compatible top-load washers, protecting the wash tub and helping keep clothes and water inside during operation. It provides a cosmetic finish and a working surface for the lid latch and hinge. What it does:

• Covers the washer tub to help contain water and laundry during cycles
• Provides the mounting surface for the lid latch and hinges so the lid opens and closes securely
• Restores the cabinet appearance if the original lid is dented, scratched, or damaged
• Helps prevent accidental access to the tub while the washer is in use

• Disconnect power to the washer before starting any repair
• Use proper lifting technique; lids can be awkward—get help if needed
• Inspect and reuse original hinge, latch, and fasteners unless replacements are provided
• If the lid includes glass, handle carefully and wear eye protection

This replacement refrigerator door gasket creates a tight seal around the fresh-food compartment door to help keep cold air in and warm, humid air out, improving cooling performance and reducing frost buildup. What it does

• Forms an airtight seal around the fresh-food door to help maintain interior temperature
• Helps prevent warm air and moisture from entering, reducing frost and condensation
• Can reduce compressor runtime caused by a leaking door seal
• Common symptom: visible gaps, tears, or warped edges around the door; uneven cooling or frost along the door perimeter

• One refrigerator door gasket

• Inspect and clean the door flange before installing to ensure a proper seal
• Start installation at the corners and work around the perimeter, pressing the gasket into the channel to seat it evenly
• Warm the gasket slightly if needed to make it more flexible for fit; avoid overheating
• Disconnect power only if required by your refrigerator model and follow all safety precautions

The water inlet is an OEM part for Whirlpool dishwashers. It serves as the water inlet valve, responsible for regulating the flow of water into the dishwasher during cycles. 

Symptoms of a bad water inlet include:

• Inability to fill with water or intermittent filling 
• Leaks or water spray from the inlet area
• Odd sounds like sputtering or crackling from the valve
• Soap residue or film left after cycles from insufficient rinsing

Causes of a bad inlet water valve can include mineral buildup from hard water, stuck or clogged waterways, or mechanical failure of sealing components. Over time and use, inlet valves can degrade leading to improper water distribution. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models. 

This box cover protects and conceals the appliance's electrical junction box, keeping wiring secure and reducing exposure to dirt and moisture. It restores a finished appearance and helps maintain safe electrical connections. What it does

• Shields the junction box and wiring from dust and debris
• Helps prevent accidental contact with live terminals
• Maintains the appliance's original fit and finish around electrical components
• Commonly replaced when the cover is cracked, missing, or damaged

• One box cover

• Disconnect power to the appliance before installing to avoid electrical shock
• Handle carefully to avoid damaging tabs or screw bosses used for mounting
• Use the OEM screws or fasteners; replace missing hardware with manufacturer-recommended parts

This spacer fits between tank components to maintain proper spacing and alignment, helping reduce vibration and wear. Use this genuine replacement to restore correct clearances and improve stability in the appliance's tank assembly. What it does:

• Positions and separates tank parts to maintain correct alignment during operation
• Helps reduce noise and vibration caused by misaligned components
• Prevents metal-to-metal contact that can cause premature wear or damage
• Restores factory clearances after service or replacement of tank parts

• One spacer

• Designed for direct replacement; use the OEM mounting location and orientation
• Disconnect power and water (if applicable) before beginning repair
• If fasteners or surrounding components are worn or damaged, replace them to ensure a secure fit

This replacement lower dishrack restores the main loading surface in your dishwasher so dishes sit securely and spray reaches them for better cleaning. It replaces a cracked, rusted, or misshapen rack to help protect dishes and keep loading organized. What it does

• Provides a stable platform to hold plates, bowls and cookware during wash cycles
• Maintains correct spacing so spray arms can reach all items for effective cleaning
• Replaces bent or rusted rack wires that can snag or chip dishes
• Helps keep utensil baskets and rollers aligned for smooth rack movement

• One lower dishrack

• Remove dishwasher racks and disconnect water/electric only if required by your model; most rack swaps are simple hand installs
• Inspect and transfer any rollers, clips, or utensil baskets from the old rack to the new one if needed
• Handle carefully to avoid wire ends that may be sharp; wear gloves if helpful
• If rails or rollers are damaged, replace those parts as well for proper rack operation