Membrane Switch Number Ap6014122 Parts

This replacement cover protects internal components and restores the proper fit and finish of the original assembly. It secures nearby parts and helps prevent debris from entering sensitive areas. What it does:

• Covers and shields internal components from dirt and loose debris
• Secures the assembly and helps reduce vibration or rattling
• Replaces cracked, broken or missing covers that cause poor fit or unsecured parts
• Restores original appearance where the factory cover is damaged or lost

• Power off and unplug the appliance (or shut off circuit) before starting work
• Remove necessary access panels or screws to reach the cover; retain hardware for reassembly
• Align cover before fastening; do not force or over-tighten screws to avoid damage

Replacement refrigerator glass shelf that restores stable, easy-to-clean storage inside your fridge. Replaces a cracked, chipped or missing shelf so you can safely store food and containers while keeping the interior organized. What it does

• Provides a flat, durable surface for storing food, containers and small appliances.
• Replaces shelves that are cracked, chipped, broken or missing.
• Helps contain spills and makes cleanup faster with a smooth, wipeable surface.
• Fits into existing shelf rails/grooves to restore usable storage space.

• Unplug the appliance or disconnect power before installing and remove all items from the shelf area.
• Lift out the old shelf by sliding it out of the support grooves; position the new shelf into the same rails until it seats securely.
• Handle glass carefully — wear cut-resistant gloves and place the shelf on a padded surface during installation.
• If shelf supports, clips or rails are damaged, replace them before use and follow the appliance manufacturer's instructions.

User interface control panel that provides the buttons and display used to select cycles and view appliance status. Replaces a faulty control panel to restore responsive controls and clear cycle/status feedback. What it does:

• Registers user input from the touchpad/buttons; may fail if buttons are unresponsive or intermittent.
• Displays cycle progress and status indicators; can show blank, garbled, or missing segments when faulty.
• Sends user commands to the appliance control system; failure can prevent cycles from starting or changing.
• Common symptom linkage: unresponsive controls, no display, incorrect cycle selection, or persistent status/errors.

• Always disconnect power (unplug or shut off breaker) before servicing the appliance.
• Handle the display/overlay and ribbon/wire connectors carefully to avoid damage.
• Remove and replace the console using correct fasteners; ensure all connectors are fully seated.

Replacement incandescent interior oven lamp that restores cooking-cavity illumination so you can check food without opening the door. Direct-fit replacement sold individually for compatible appliances. What it does:

• Restores interior oven lighting so you can monitor cooking without opening the door
• Replaces a burned-out or flickering bulb to eliminate dark or partially lit oven interiors
• Helps diagnose whether lack of light is due to the bulb
• Fits behind the oven light cover and provides general illumination of the cavity

• Turn off power and allow the oven to cool completely before replacing the lamp
• Remove the oven light cover or shield per your appliance instructions before swapping the bulb
• Avoid touching the glass with bare hands; use a clean cloth or gloves to prevent oils on the bulb
• Reinstall the cover securely and test the lamp; if it still does not light, check the fixture and power

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance

The Relay is an OEM part for use in Bosch microwaves. This part acts as a safety device, monitoring the temperature within the microwave to prevent overheating. If the microwave reaches an unsafe temperature, the relay thermostat will interrupt the power supply to the heating element or magnetron, effectively halting the cooking process to prevent damage or fire.

The need for replacement can arise from a thermostat that has become overly sensitive or has failed completely, often due to repeated exposure to high temperatures or in the event of a significant overheating incident.

Symptoms of a failing Relay include:

• The microwave unexpectedly turning off during use, especially if it hasn't been running long enough to complete the cooking cycle.
• The microwave refusing to start, which can occur if the thermostat is stuck in the open position, indicating an overheat condition even when the appliance is cool.
• Inconsistent cooking results, where the microwave seems to heat intermittently or not at all, suggesting the thermostat may be cutting off power prematurely.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This turntable support ring is the low-profile roller guide that sits under the microwave's glass tray to keep it centered and allow smooth rotation for even cooking. It restores proper tray movement and reduces scraping or wobble. What it does:

• Supports the glass turntable and keeps it aligned on the motor shaft
• Provides rolling contact so the tray rotates smoothly during use
• Helps prevent the tray from wobbling, sticking, or making grinding noises
• Keeps food from contacting the microwave cavity by maintaining correct tray height

• Always unplug the appliance before removing or installing parts
• Remove the glass tray, set the ring in the cavity track, then replace the tray so it sits evenly on the rollers
• Handle the glass tray carefully to avoid chips or cuts; replace damaged trays or rings
• No special tools required for most installs; consult your model's service instructions

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This metal mounting bracket secures internal components and panels to restore proper alignment and reduce rattling. It's a straightforward replacement part that helps keep appliance panels and assemblies firmly in place for reliable operation. What it does:

• Provides a secure attachment point for panels or internal assemblies to prevent movement and vibration
• Helps correct alignment issues that can cause rubbing, gaps, or noise
• Restores the original fit where a bent, cracked, or missing bracket caused loose parts
• Works with the appliance's existing fasteners and mounting points

• Remove power and, if applicable, disconnect the appliance from water before beginning work
• Use the factory fasteners or OEM replacement screws to secure the bracket in the original location
• Verify alignment of the attached panel or assembly before fully tightening fasteners

This electronic control board is the dishwasher's main control module that manages cycles, user inputs and displays. Replacing a faulty control restores proper cycle selection, timing and panel responsiveness for proper appliance operation. What it does

• Receives and processes commands from the front control panel and user interface
• Controls wash, drain and pump timings and cycle sequencing for reliable performance
• Monitors sensors and switches to coordinate heater and motor operation
• Faulty board symptoms may include unresponsive controls, erratic cycles, or failure to start

• One electronic control board assembly

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify wiring connections and harness orientation match the replacement before powering up
• Test the appliance for proper operation before reassembling all panels

This flat metal washer provides a durable spacer and load-bearing surface for fasteners in the appliance, helping maintain proper alignment and distribute pressure to prevent damage. Simple replacement for worn or missing hardware. What it does:

• Sits under a nut or bolt to distribute load and protect mating surfaces
• Helps maintain correct spacing and alignment of assemblies
• Reduces wear and loosening where fasteners contact panels or components
• Reduces vibration-related movement when installed correctly

• Power off and unplug the appliance before accessing internal components
• Remove the fastener carefully; note orientation and any mating parts for reassembly
• Replace only with the same type and thickness of washer to preserve fit and function
• If corrosion or additional hardware damage is present, inspect and replace adjoining fasteners or parts as needed

This drawer heating element is the replacement heating component for warming/serving drawers, restoring the drawer's ability to gently heat and hold food at serving temperatures. It fits into the drawer cavity and connects to the drawer's power circuit. What it does:

• Heats the warming drawer to maintain food temperature for serving
• Restores normal warming function when a drawer no longer heats
• Helps resolve symptoms such as no heat from the drawer or uneven/weak warming
• Works as the drawer's primary heating component in the warming/serving assembly

• One drawer heating element

• Disconnect power to the appliance before servicing to avoid shock
• Remove the warming drawer and any trim/panels to access the element
• Inspect wiring and connectors; replace only with matching OEM part number