Mgd5 Parts

The Door Seal is an OEM component specifically designed for Whirlpool dryers. It works to create an airtight seal between the dryer door opening and drum interior. During operation, heated air and moisture are contained within the drum thanks to this crucial seal. 

Symptoms of a worn door seal include:

• Increased drying time due to air leaks
• Clothes not drying completely before end of cycle  
• Excess humidity escaping into home
• Discoloration or residue buildup on door glass

Causes of failure are normal wear and compression over extended use, or damage from improper door closure. A worn seal degrades efficiency and performance of the dryer.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This replacement steam spray nozzle directs steam into the appliance's steam system to help produce even steam flow for wrinkle reduction and refreshing cycles. It restores proper steam delivery when the original nozzle is cracked or clogged. What it does:

• Directs and shapes steam flow into the appliance's steam path for consistent operation.
• Helps restore normal steam performance when steam output is weak or uneven.
• Prevents misdirected steam that can reduce cycle effectiveness.
• Works as a direct replacement for a damaged, cracked, or clogged nozzle.

• One steam spray nozzle

• Disconnect power and water supply before servicing; allow the appliance to cool.
• Handle the nozzle carefully to avoid damage; inspect surrounding seals and fittings.
• May require basic hand tools for access; follow OEM instructions.

This replacement screw secures appliance components in their intended positions. Swapping a missing, stripped, or corroded screw helps stop rattles and keeps panels, brackets, and internal parts tight for reliable operation.

• Fastens panels, brackets, or internal parts where specified by your model
• Helps reduce vibration and rattling caused by loose hardware
• Restores alignment when an original screw is missing or damaged
• Replace if threads are stripped, head is rounded, or corrosion is present

• Disconnect power and shut off water or gas before service
• Verify the exact location using your model's parts diagram/IPL
• Start threads by hand to avoid cross-threading; tighten only until snug
• Reuse any original washers, clips, or spacers if present

This bulkhead is the front interior panel that supports the drum and helps direct dryer airflow for efficient tumbling and exhaust. It restores proper drum alignment and airflow when the original panel is worn or damaged. What it does:

• Provides a stable mounting surface for the drum and front bearing/glide assembly
• Helps channel air from the drum to the exhaust path for consistent drying
• Prevents drum wobble and rubbing that can cause noise or fabric wear
• Reduces air leaks and hot spots that can extend dry times or trigger heat issues

• One bulkhead panel

• Disconnect power and venting before beginning any repair
• Removing the front panel and drum is typically required to access and replace the bulkhead
• Inspect drum seals, rollers, and bearings while the dryer is open; replace any worn components
• Use appropriate tools and follow OEM instructions.

This console shell is the outer housing that covers the dryer control area and delivers a clean, finished appearance while protecting internal controls. It restores the dryer's original look and shields electronics from dust and wear. What it does:

• Replaces the damaged or cracked control console housing to restore fit and appearance
• Protects control board, switches, and wiring from lint and debris
• Provides the mounting surface for control knobs, buttons, and bezels
• Helps prevent moisture and dust from reaching internal components, reducing nuisance issues

• Disconnect power before starting; this part requires access behind the console
• Remove control knobs and trim as needed to free the old shell; retain screws and hardware unless replacements are supplied
• Handle edges carefully to avoid scratching the finish during installation

This electrical plug connects an appliance wiring harness to its mate, restoring a secure electrical connection to enable normal operation. Fits specific Whirlpool-designed connectors for targeted replacement when a connector is damaged or corroded. What it does

• Provides a secure mating point for a wiring harness to restore an interrupted circuit.
• Replaces cracked, melted, corroded, or loose connector ends that can cause intermittent power or component failures.
• Helps prevent arcing and poor contact that lead to overheating or erratic operation.
• Use when visual damage, burned contacts, or broken retaining features are found on the original plug.

• One replacement plug.

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing electrical connectors.
• Verify connector orientation and seating; ensure mating terminals are clean and undamaged before installation.
• Use proper crimping or soldering and insulation methods per OEM guidance; avoid exposed conductors.

This nozzle body assembly directs wash water through the dishwasher's spray system to help deliver thorough cleaning. It replaces a damaged or clogged nozzle body to restore proper water flow and spray coverage. What it does:

• Channels water from the wash arm to the spray nozzles for even distribution
• Helps eliminate weak sprays or uneven cleaning caused by cracked or clogged nozzle housings
• Works as the structural mount for the nozzle(s) in the spray arm assembly
• Fits into the dishwasher spray system and interfaces with existing wash-arm components

• One nozzle body assembly as shown

• Recommended for installation by someone comfortable with basic dishwasher disassembly
• Disconnect power and water supply before beginning work to avoid shock or flooding
• Inspect adjacent seals, spray arms, and clips during replacement and clean any debris
• Use only the exact replacement part number for fit; do not force or modify parts

This multi-vent plug seals an unused vent opening to stop unwanted airflow and keep the appliance interior protected. It's a direct-fit replacement designed to restore proper venting and help prevent drafts, debris, and pests. What it does:

• Plugs an unused multi-vent opening to prevent air leakage and drafts
• Helps keep dust, lint, and small debris out of the appliance vent path
• Reduces the chance of pest entry through an open vent
• Restores the intended vent configuration after service or part removal

• Disconnect power or gas to the appliance before servicing for safety
• Install by aligning and pressing the plug firmly into the vent opening until seated
• Do not force if resistance is excessive; inspect for obstructions or damage
• Replace damaged parts before installing the plug

This replacement cover is a cabinet access panel that protects internal components and restores a finished appearance. It keeps components shielded from dust and debris while helping maintain safe, stable operation of the appliance. What it does:

• Shields internal parts and wiring from debris, spills, and accidental contact
• Restores the appliance's exterior finish and maintains proper panel alignment
• Helps reduce noise and vibration by securing the cabinet opening
• Commonly replaced when the panel is cracked, bent, missing, or loose

• One cover

• Disconnect power to the appliance before beginning any work
• Removal/installation typically requires basic hand tools; handle part carefully to avoid scratches
• Follow the manufacturer's service instructions for correct fitment and fastener torque
• If you see damaged clips or fasteners, replace them as needed to ensure a secure fit

This is a drum assembly used in many home dryers. The component is located inside the appliance and is tasked with holding the clothing during a dryer cycle. It is made of durable materials but can experience wear and tear or damage that cause it to malfunction. If the drum assembly is worn or damaged, it may cause the appliance to buzz or squeal, start and stop, and seize up during use.If the drum assembly is damaged or worn, it will need to be replaced. This will require a set of tools and a pair of work gloves. Before starting the replacement process, make sure the dryer is unplugged from the wall. The dryer will need to be disassembled to access the drum assembly. The belt can be used to pull out the drum so the new component can be installed. Replace the part and reassemble the dryer. It should be plugged back in before use.This part is sold on an individual basis. It is designed to be used with several dryers created by Admiral, Amana, Maytag, Kenmore, and Whirlpool. The drum assembly is an authentic OEM replacement part that is sourced directly from the manufacturer.

The Harns-Wire is an OEM part for Whirlpool electric and gas dryers. It is an assembly of wires and connectors that link internal dryer components together, allowing signals and power to flow properly through the system. 

Causes of a bad harness can include wire insulation cracking from dryer drum movement, severed conductors leading to power loss in certain circuits, or broken connectors interfering with components like motors or sensors.

Symptoms of a bad harness include:

• Inability to start or stop cycles automatically  
• Temperature fluctuations resulting in uneven drying
• Unexpected stops or failure to tumble clothes smoothly
• Activation of safety cutouts or circuit breakers

 This harness is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers. 

This front control panel provides the user interface and cosmetic cover for your appliance, restoring button access and a finished appearance. It replaces a cracked, faded, or nonfunctional front panel so controls are accessible again. What it does:

• Serves as the exterior cover for the appliance control area and houses buttons/labels.
• Restores proper button alignment and readable markings for safe, accurate operation.
• Replaces panels that are cracked, broken, or cosmetically damaged.
• Can resolve issues where physical button presses do not register due to damaged panel components.

• High-level: remove power (unplug or disconnect power at the breaker) before starting.
• Typical install involves removing trim or console screws, disconnecting any attached cables, and swapping the panel; keep track of fasteners.
• Handle with care to avoid scratching the finish and to prevent damage to any attached switches or overlays.

This gas surface burner replaces a damaged or worn cooktop burner to restore consistent heat for everyday cooking. It fits sealed or standard gas cooktops and provides a stable flame for pots and pans. What it does:

• Replaces a cracked, warped, or corroded burner head to restore even heating
• Helps correct uneven or fluctuating flames and weak heat output
• Restores proper burner ignition when burner damage prevents lighting
• Reestablishes a correct flame pattern for safer, more efficient cooking

• Turn off the gas supply and unplug the appliance before starting any work
• Remove grates and the damaged burner, then seat the new burner in the cooktop alignment slots
• After installation, check burner seating and ignition; light each burner to confirm proper flame
• If you smell gas, cannot shut off the supply, or are unsure about the installation, stop.

This bumper cushion reduces vibration and cushions contact points to protect surfaces and quiet operation. It restores proper spacing and prevents metal-to-metal contact on compatible appliances. What it does:

• Cushions doors, drawers or panels to prevent rattling and wear
• Absorbs shock to reduce noise during cycles or movement
• Helps maintain proper alignment and spacing of components
• Prevents scratches and protects finishes where parts meet

• Disconnect power before accessing internal parts or removing panels
• Remove the old bumper and press the new bumper into the same mounting location (no special tools usually required)
• Replace with like-for-like bumper; do not modify part or mounting to avoid fit issues
• If adhesive is used, follow OEM guidance and allow proper curing time before use

This complete door assembly replaces a damaged or worn oven door to restore proper sealing and safe operation. It provides the outer structure and handle interface needed for opening, closing, and maintaining internal temperatures. What it does

• Replaces a broken, dented, or warped door to help restore proper closure and heat retention.
• Restores a secure latch and alignment so the appliance opens and closes smoothly.
• Reduces heat loss and helps prevent uneven cooking caused by a poor seal.
• Helps eliminate rattling or vibration from a loose or damaged door.

• High-level replacement; handle the glass and edges carefully to avoid cuts or breakage.
• Disconnect power (and gas supply for gas appliances) before removing the old door.
• Follow manufacturer instructions for door removal and reinstallation; two people may be required for safe handling.
• If the door includes glass or internal clips, inspect for secure seating and tightened fasteners after installation.