Mgr5875qbd Parts

This replacement control knob restores a worn, cracked, or missing range/stove control interface so you can safely and accurately set cooking temperatures and modes. Simple, direct fit for compatible Whirlpool control shafts. What it does:

• Replaces a damaged or missing range/stove control knob so settings can be adjusted reliably
• Provides a solid grip and clear pointer for selecting temperature or function
• Stops slipping or spinning when the original knob has become loose or worn
• Helps prevent accidental setting changes from a broken or hard-to-turn control

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Align the knob splines with the control shaft and push straight on until fully seated
• Verify proper operation by turning the control through its settings after reconnecting power
• If the knob does not seat or turn smoothly, do not force it—inspect shaft and replace damaged components as needed

This door switch detects when the appliance door is closed and signals the control so the unit can start or run. Replacing a faulty switch restores proper door-sensing and safe operation. What it does:

• Detects door open/closed status and sends the signal to the appliance control
• Prevents the unit from starting or running if the door is open
• Commonly linked to symptoms like the appliance not starting, not completing cycles, or lights/controls behaving incorrectly
• Works as the safety interlock for door-dependent functions

• One door switch

• Disconnect power before servicing to avoid shock or injury
• Match connector style and mounting alignment to the original switch before final installation
• Handle the switch and wiring gently to avoid damage to terminals or harnesses

This small rubber bumper cushions and stabilizes moving appliance parts to reduce vibration, noise and wear. It restores proper spacing where a worn or missing stop lets components rub or rattle. What it does:

• Acts as a soft stop to prevent metal-on-metal contact and dampen vibration
• Helps eliminate rattling or scraping noises from doors, drawers or panels
• Maintains correct alignment and spacing of moving parts
• Protects finishes and extends service life of mating components

• Typically pressed or snapped into a socket or mounting post; no special tools usually required
• Clean the mounting area of dirt and residue before installing for best adhesion/fit
• Ensure the bumper is the correct match and fully seated before operating the appliance
• Disconnect power when working near electrical or moving parts

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This orifice holder secures the burner orifice to the gas manifold so the burner stays aligned and maintains proper gas flow. It helps keep burner assembly components positioned for consistent ignition and flame performance. What it does:

• Holds the burner orifice in place on the manifold to prevent misalignment
• Keeps the orifice correctly positioned for steady gas flow and stable flames
• Can address symptoms like uneven flame, intermittent ignition, or poor burner performance when the orifice is loose
• Works as a direct replacement part for the factory-mounted orifice support

• Turn off gas supply and electrical power before servicing any gas appliance
• Inspect surrounding gaskets and fittings; replace damaged parts as needed
• Tighten to manufacturer torque specs and check for gas leaks after installation

Color: Taupe. Large

Color: Taupe. Medium

Color: Taupe. Small

This large gray burner cap fits over a cooktop's burner head to protect burner ports and help shape the flame for even cooking. Replacing a damaged cap restores proper burner appearance and helps maintain consistent heat. What it does:

• Covers the burner head to protect ports from spills and debris
• Helps direct and stabilize the burner flame for more even heating
• Can reduce flame irregularities caused by warped or cracked caps
• Restores the cooktop's finished appearance when original cap is chipped or discolored

• One large gray burner cap

• Turn off the appliance and ensure all surfaces are cool before starting
• Remove old cap by lifting straight off; set new cap in place so it seats flat on the burner head
• Clean burner head and surrounding area of debris before installation

This medium-gray burner cap covers the cooktop burner to help direct flame and protect the burner head from spills and debris. It restores proper flame shape for more even cooking and a cleaner cooktop appearance. What it does:

• Sits on top of the burner head to shape and stabilize the flame
• Protects the burner head from food spills, grease and corrosion
• Helps promote even heating and consistent cooking performance
• Can reduce visible flame irregularities or weak spots around the burner
• Useful when a cracked, warped or missing cap causes poor ignition or uneven cooking

• One medium-gray burner cap

• Ensure the range is off and cooled before handling burner parts
• Remove the grate and lift off the old cap; set the new cap in place so it seats flat on the burner head
• Do not force or rotate the cap; improper seating can affect ignition or flame shape
• Wipe away debris before reinstalling grates; test burner on low flame to confirm proper operation