Mgr8670aw W/ Aqualift Parts

This outer door panel replaces a damaged or dented refrigerator door surface to restore appearance and protect internal components. It fits the corresponding factory door assembly and provides a like-new exterior finish. What it does:

• Replaces a bent, dented, scratched, or rusted outer door surface
• Restores the refrigerator's exterior appearance and helps protect internal door parts
• Addresses cosmetic damage that can lead to moisture intrusion or continued corrosion if left unrepaired
• Works with the existing inner liner, insulation, and hardware when installed correctly

• Disconnect power to the appliance (unplug or shut off breaker) before starting any repair
• Remove door trim, handles, and existing fasteners to detach the old panel; save or reuse compatible hardware
• Handle panels carefully to avoid new dents or scratches during installation; align edges before securing fasteners

This inner door glass is the heat-resistant panel mounted on the inside of the oven door. It restores a clear, secure barrier to help retain heat and visibility when the original glass is cracked, shattered, or stained.

• Forms the inner pane of the oven door to contain heat and allow viewing of food
• Damage can cause heat loss, longer preheat/cook times, and unsafe sharp edges
• Cracked, shattered, or missing glass should be replaced before using the appliance
• Cloudy or permanently stained glass reduces visibility into the oven

• Disconnect power at the breaker and allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support or remove the door and work face-down on a padded surface
• Transfer any brackets/clips/insulation as configured; do not overtighten fasteners against the glass

This oven rack restores a stable cooking surface inside the oven, letting you slide baking sheets, pans and cookware in and out safely. It replaces bent, rusted or missing racks to help your oven perform as intended. What it does:

• Provides a stable shelf for cookware and bakeware during cooking and baking
• Slides into oven rack guides to allow easy insertion and removal of pans
• Replaces warped, bent or missing racks that cause uneven cooking or instability
• Compatible with models that use part number W11256463

• Allow the oven to cool completely before installing or removing the rack.
• Slide the rack into the oven's existing rack guides until fully seated.
• Wear gloves to protect hands from sharp edges and to avoid pinching.
• Do not modify the rack or force it into incompatible guides.

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

This spacer provides a precise gap for proper alignment and clearance between components, helping maintain correct part positioning for reliable operation. It's a simple replacement that restores intended spacing and reduces wear. What it does:

• Positions and separates adjoining parts to maintain correct clearance
• Helps prevent rubbing, misalignment, or binding of moving components
• Restores factory spacing after maintenance or part replacement
• Fits where the original spacer was used to support assembly alignment

• One spacer as shown

• Inspect surrounding components and mounting surfaces for damage before installing
• Remove power to the appliance and follow manufacturer service instructions
• Install in the same orientation as the original spacer and verify proper clearance
• If fasteners or adjacent parts are worn, replace them to ensure a secure fit

This replacement gas control knob restores positive, easy control of a range burner valve so you can adjust flame settings and operate the burner smoothly. Simple swap for a worn, stripped, or missing knob. What it does:

• Turns the burner valve to set flame height and turn the burner on/off
• Replaces cracked, stripped, loose, or missing knobs that slip on the valve stem
• Restores tactile, indexed control for accurate heat adjustments
• Helps eliminate spinning or wobbling while you operate the burner

• Always shut off the appliance power and gas supply before servicing.
• Most installs are push-on: pull the old knob straight off the valve stem and align the new knob's splines, then push until seated.
• If the knob won't seat or the valve stem is damaged, stop and inspect the valve; do not force the knob.

This 18-inch supply power cord delivers a reliable electrical connection to restore appliance power and safe operation. It replaces a damaged or missing cord so the unit can receive power from the wall outlet. What it does:

• Provides the main AC connection between the appliance and household power
• Replaces frayed, melted, or broken cords that cause intermittent power or no power
• Restores secure plug and strain-relief connection to reduce arcing and overheating risks
• Matches factory-style terminal ends for a direct fit when compatible

• One 18-inch supply power cord

• Disconnect power at the breaker or unplug the appliance before starting
• Inspect terminals and cord routing; secure with the factory strain relief
• Tighten terminal connections firmly but do not overtighten; confirm proper insulation

This orifice holder assembly secures the burner orifice to the gas valve so the cooktop gets the correct gas feed for reliable ignition and consistent flame control. Replaces a worn or damaged holder to restore proper burner operation. What it does

• Holds the burner orifice in place at the valve outlet for correct gas flow
• Helps maintain consistent flame size and even heating across the burner
• Can address symptoms like weak or uneven flames or a burner that won't light reliably
• Prevents orifice movement that can cause improper combustion or intermittent ignition

• Turn off gas supply and electrical power before servicing; follow local codes
• Inspect the orifice and surrounding fittings for damage or debris during replacement
• Tighten to manufacturer torque; avoid overtightening which can damage threads

This outer oven door glass replaces cracked or damaged exterior glass so you can safely view the oven cavity and restore the door's appearance. Fits Whirlpool-built ranges and restores the door's protective outer surface. What it does:

• Replaces broken, cracked, or severely scratched outer door glass
• Restores a clear view into the oven cavity for monitoring food
• Helps maintain the oven door's finished appearance
• Prevents loose glass from creating a safety hazard

• Disconnect power to the appliance before beginning any repair
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Removal may require taking the oven door off and removing retaining screws/panels

Color: White  Note: Right side endcap