Mhw5630hc1 Parts

The Tub to Pump Hose is an OEM part for Whirlpool washing machines. This hose connects the washer tub to the pump, allowing water to flow between the two components.

The hose plays an important role in draining water from the wash tub after each cycle. It features a flexible yet durable design to withstand constant water pressure and prevent kinks that could block flow.

Causes of a bad hose can include cracks or splits from extended use, corrosion of connectors over time, or accidental punctures.

Symptoms of a bad hose include:

• Incomplete or slow draining of water after cycles
• Puddles or leaks near the pump or tub area
• Wet clothes indicating standing water issues
• Strange noises during draining phases

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, and internal components in your appliance. Replacing a missing or stripped screw restores a tight, rattle-free fit and helps keep parts properly aligned and protected during operation.

• Fastens appliance panels, brackets, and hardware in the designated locations
• Replaces missing, stripped, or corroded fasteners
• Helps reduce vibration noise and looseness from unsecured parts
• Restores proper fit and alignment after service or reassembly

• Disconnect power; turn off water supply before servicing
• Match the screw to the original location and replace one at a time to maintain alignment
• Use the correct driver; tighten snugly without overtightening to avoid stripping metal or cracking plastics
• If threads in the mating hole are damaged, repair/replace the clip or insert as specified in the service manual

This replacement hose routes water between internal components, maintaining a secure, leak-resistant path so your appliance can fill, circulate, and drain as designed. Replacing a damaged or clogged hose restores proper water flow and helps prevent leaks.

• Transfers water between components; correct routing and clamping keep connections sealed
• Common failure signs: leaks, kinks, cracks, soft spots, or internal blockages
• Helps resolve: water under the unit, standing water or slow draining, fill/drain error codes, and musty odors from trapped water

• Disconnect power and shut off the water supply before servicing
• Place towels or a shallow pan to catch residual water; note original routing and clamp positions
• Inspect/replace clamps if worn; fully seat the hose on fittings and tighten clamps securely
• Run a test cycle and recheck all connections for leaks

The Console is an OEM part for Whirlpool washing machines. Located at the top center of the washer, the console houses the control panel and provides an ergonomic surface for adjusting settings. Its smooth, protective surface allows seamless integration of electronic components. 

Causes of a bad console can include cracks or damage developing from repeated impact or heavy loads, warping from temperature fluctuations, or damage from moisture over time.

Symptoms of a bad console include:

• Loose or detached mounting to the washer cabinet 
• Visible cracks along stress points
• Warping or buckling of the surface from temperature changes

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drum Baffle is an OEM part for Whirlpool washing machines. It is an internal component located inside the tub or drum that helps distribute water flow efficiently during the wash cycle. The baffle directs water in a way that ensures items are soaked and soaked evenly on all sides for thorough and effective cleaning.

Symptoms of a bad baffle include:

• Poor washing or rinsing performance 
• Items not getting completely clean or taking longer to wash
• An off-balance wash load  
• Excessive noise or vibration during spin cycles

Causes of a bad drum baffle can be normal wear and tear over time, or damage due to an off-balance or overfilling of the wash load. This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replace yours today to optimize washing quality.
 

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

• Connects hot and cold water faucets to the washer's inlet valves
• Replace if hoses are leaking, cracked, bulging, or kinked
• Can help address slow filling caused by restricted or kinked hoses
• Useful when installing or relocating a washer

• Unplug the washer and shut off both water supply valves before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
• Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
• Restore water and power; run a fill test and check all connections for leaks

This fill hose carries water from the home supply to the appliance inlet valve, restoring proper water fill and helping prevent leaks when the original hose is cracked, worn, or blocked. Ideal for replacing damaged inlet lines. What it does:

• Delivers water from the household supply to the appliance inlet valve for normal fill cycles.
• Replaces cracked, split, or deteriorated hoses that can cause leaks at connections.
• Resolves symptoms such as slow or no water fill, visible leaks, or intermittent filling.
• Durable replacement designed to match OEM routing and connection points.

• Always shut off water supply and disconnect power before starting work.
• Inspect and replace hose clamps or inlet gaskets as needed; ensure proper seating to prevent leaks.
• Hand-tighten fittings and secure clamps—avoid overtightening metal fittings.
• After installation, restore water and power and run a short fill cycle while checking for leaks.

This replacement hose restores a sealed, reliable path for water or air inside your appliance. Swapping a worn or cracked hose helps stop leaks and corrects performance issues so cycles fill, wash, and drain the way they should.

• Routes water or air between internal components to maintain proper operation
• Maintains a sealed connection to help prevent leaks
• Kinks, cracks, or clogs can cause water under the unit, slow/no fill, or drain problems
• Replacing a damaged hose helps restore normal cycle performance

• Disconnect power and shut off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note original routing and clamp locations; transfer clamps if reusable
• Fully seat the hose on each fitting, secure per OEM guidance, and test for leaks after installation

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

5 foot. Package of 2.

The Drain Hose is an OEM part for Whirlpool washers. It is responsible for carrying the wastewater out of the washer during the draining process.

A bad drain hose can be caused by wear and tear, blockages, or damage. If you notice water leaks, slow or incomplete drainage, or unusual noises during the draining cycle, it may indicate a problem with the drain hose.

Symptoms of a bad drain hose include:

• Water leaks around the hose connection points
• Slow or incomplete draining of water from the washer
• Gurgling or unusual noises during the draining process
• Visible damage or signs of wear on the hose

Replace your faulty drain hose with this genuine OEM Whirlpool part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Hose is an OEM part for Whirlpool washing machines. It is a gasket or seal located inside the machine that protects internal components from leaks or damages. The hose washer plays an important role in sealing hoses and pipes to prevent water from escaping during rotation, agitation, and drain cycles. 

Causes of a bad hose include cracks, tears, or warpage over multiple usage cycles which allows water to bypass intended drainage paths. When this occurs, it can lead to excess moisture inside the washer cabinet. 

Symptoms of a bad hose include:

• Water leaks underneath or around the washer
• Puddles or standing water inside the washer cabinet 
• Slow or ineffective draining during washing cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This retainer is a small mounting clip that secures internal components in place to prevent shifting and noise during operation. It restores proper alignment so panels or assemblies stay fastened and stable. What it does

• Holds a panel, trim, or internal component securely in its mounting location
• Prevents rattling, vibration noise, and loose or sagging parts
• Keeps connected parts aligned for reliable operation
• Commonly replaced when clip is cracked, broken, or missing

• One retainer clip

• Disconnect power before starting any repair
• Remove necessary panels or access covers to reach the damaged clip
• Replace the clip in the same orientation; avoid forcing parts to prevent damage
• If additional fasteners are damaged or missing, replace them as needed for a secure installation

This is a replacement screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fit and reduces rattling or loose trim so doors, panels and controls sit securely. What it does:

• Secures panels, brackets or trim to the appliance cabinet
• Restores proper alignment and tightness where a missing or damaged screw causes looseness
• Helps eliminate vibrations and rattling caused by loose fasteners
• Matches OEM thread and head style for a proper fit in the intended mounting hole

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Turn off power to the appliance before working near electrical components
• Replace any damaged or stripped mating hardware for a secure repair

The Noise Filter is an OEM part for Whirlpool washing machines. It absorbs vibrations and dampening sounds produced during agitation, spinning, and draining cycles. Located inside the unit, the noise filter helps contribute to a quieter washing experience.

Causes of a bad noise filter can be normal wear and tear over time, accumulated debris that hinders sound absorption, or physical damage to the noise filtering material.

Symptoms of a bad noise filter include:

• Excessively loud operation, even on lower cycles or speeds
• Strange rattling or buzzing noises coming from inside the washing machine
• Vibrations felt through the unit or nearby surfaces during operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.