Mveb765fw1 Parts

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This supporter motor is the mounting support assembly that holds and stabilizes the appliance motor, helping maintain proper alignment and reduce vibration for reliable operation. It restores secure motor positioning after wear or damage. What it does

• Supports and secures the motor housing to prevent movement during operation
• Reduces excessive vibration and noise caused by a loose or worn motor mount
• Helps keep the motor aligned so the drivetrain and drum/tumbler run smoothly
• Used when visual damage or cracking is present on the motor support

• Disconnect power (and gas if applicable) before beginning any repair
• Access may require removing the appliance rear or front panel and supporting the motor/drum while swapping the part
• Verify mounting orientation and fastener locations match removed part; retain any grommets or isolators if present
• If wiring is attached, note connector positions before disconnecting.

This fuse assembly replaces the blown safety fuse that protects the appliance's electrical circuit. Restores overcurrent/overheat protection so the appliance can operate safely after the faulty fuse is replaced. What it does:

• Replaces the appliance's safety fuse to stop electrical flow when an overcurrent or overheating condition occurs.
• Commonly used when the appliance won't power on, trips repeatedly, or has a burned fuse.
• Provides the correct connector and wiring length for a direct replacement (pre-assembled).
• Matches OEM fit and function to maintain factory safety features.

• One fuse assembly (fuse pre-installed on wiring harness)

• Disconnect power (unplug or shut off breaker) before attempting replacement.
• Verify the appliance is fully de-energized and discharge any capacitors where applicable.
• Replace only with the exact part; confirm fit with PN EAF36358319 before installing.

This cooling fan motor spins the internal fan that moves air through the appliance to dissipate heat and protect sensitive components. Replacing a noisy, weak, or seized motor restores proper airflow and dependable operation.

• Drives the cooling fan to circulate cooling air within the cabinet
• Helps prevent overheating and thermal shutdowns of internal parts
• Restores airflow when the original motor is worn, noisy, or not turning
• Typical signs include no fan movement, unusual humming/squealing, reduced airflow, or the unit shutting off from heat

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool completely
• Access the motor by removing the appropriate rear/top or control-panel cover for your model
• Note wire orientation; transfer the fan blade and any mounting parts from the original motor if required
• After installation, ensure the fan spins freely and verify proper airflow and quiet operation

The Cooling Fan Blade is an OEM part for LG microwaves. It circulates airflow around internal components to reduce temperatures during cooking.  

As it operates continuously, the tightly wound coils of the fan motor are prone to degradation and wear over several years of use. Damage to the fan housing can also inhibit proper functioning.

Causes of a bad cooling fan blade include:

• Broken or cracked plastic that unbalances the unit
• Worn down edges that decrease efficiency 
• Accumulated dirt that impedes ventilation

Symptoms of a bad cooling fan blade include:

• Overheating trips from the thermal cut-off  
• Cook times lengthening due to inefficient cooling
• Rattling or vibration noises emanating during operation

This OEM LG replacement ensures balanced airflow and consistent cooling for years of use. It is also compatible with some Kenmore and Sears/Kenmore microwaves.

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

This replacement door handle restores a secure grip and clean look on your appliance door. If the original handle is cracked, loose, or missing, installing this part lets you open and close the door with confidence.

• Provides the handhold needed to open and close the door
• Attaches to the door using existing mounting points
• Replaces damaged, worn, or missing handle
• Common symptoms: loose or wobbly handle, cracked/broken handle, difficulty opening the door

• Disconnect power to the appliance before servicing
• Protect glass and finishes; support the door while removing/installing the handle
• Note handle orientation and screw locations; transfer and snug existing hardware without overtightening
• Some models require removing inner door trim to access mounting screws—follow your model's service information

Replacement refrigerator door handle that restores a secure grip and easy access to the appliance. Designed to match the original fit and finish for compatible LG refrigerators, keeping doors functional and looking clean. What it does:

• Replaces cracked, broken or loose handles so the door opens and closes securely.
• Restores proper grip and reduces wobble or play that can make doors hard to operate.
• Helps prevent further cabinet or door trim damage caused by a failing handle.
• Useful when the original handle is scratched, dented or cosmetically worn.

• High-level removal/installation: remove any trim/caps, loosen mounting fasteners, swap in the replacement handle and tighten; follow the model-specific service manual for exact steps.
• Stabilize the door while working to avoid bending or damaging the hinge or gasket.
• Turn off power or ice/water features only if the model's service manual recommends it; avoid contact with electrical components.
• Reuse original screws/clips unless new fasteners are explicitly included.

The Halogen Lamp is an OEM part for LG microwaves. It provides illumination inside the microwave cavity during operation, allowing users to view food items as they cook. 

As it runs continuously during use, the lamp is subjected to heat and electrical wear over thousands of hours. Causes of a bad lamp include filament burnout or depletion over the life of the bulb.

Symptoms of a bad Halogen Lamp include: 

• Dim or no interior lighting during cooking
• Uneven heating as hot and cold spots can form without consistent light distribution  
• Difficulty monitoring food doneness properly in darker conditions

This OEM LG replacement is also compatible with Sears/Kenmore models. It ensures reliable lighting to allow for proper food monitoring and heating. With precision design, it delivers consistent brightness cycle after cycle.

This plate assembly base supports the microwave turntable, keeping the glass tray centered and stable so cookware rotates evenly for consistent heating. It replaces a worn or damaged base to restore proper turntable support. What it does:

• Provides the rotating support surface beneath the glass turntable to keep it level and centered
• Helps the turntable rotate smoothly; can resolve wobbling, slipping, or uneven spinning
• Restores correct alignment between the glass tray and motor drive coupling
• Reduces noise caused by a cracked or warped base that no longer seats the tray properly

• One plate assembly base

• Disconnect power before servicing the appliance to avoid electrical shock
• Handle the glass turntable carefully when removing and reinstalling to prevent breakage
• Ensure the base seats fully in the cavity and the glass tray is properly centered
• If the turntable still does not rotate after installation, check the drive coupling and motor for faults

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts