Mvwb835wd3 Parts

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

Color: Grey (Chrome Shadow)

Kit contains two 10 feet inlet hoses.

This replacement seal is the rubber gasket that helps form a watertight barrier between the washer tub and front opening, reducing leaks and keeping laundry contained during cycles. It restores a snug, reliable seal when the original is worn or damaged. What it does:

• Creates a waterproof barrier to prevent water from escaping the tub during wash and rinse cycles
• Helps keep clothes and suds inside the drum for proper operation
• Reduces trapped moisture that can lead to mildew and odors
• Symptoms: visible tears, cracks, flattened or deformed rubber, water pooling on the floor near the door

• Disconnect power and turn off the water supply before starting any repairs
• Inspect the door opening and tub lip; clean surfaces to ensure a proper fit
• Stretch and seat the seal evenly around the tub opening; ensure any retaining bands or clamps are properly positioned

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This sound absorber is an OEM-style insulation pad designed to reduce washer cabinet noise and rattling for a quieter cycle. It mounts inside the appliance cabinet to help dampen vibration and airborne sound. What it does:

• Dampens vibration and reduces cabinet noise during spin and agitation
• Helps minimize rattling from internal components for a quieter operation
• Supports stable operation by providing a cushioned barrier between parts and the cabinet
• Commonly replaced when padding is torn, missing, or compressed

• One sound absorber insulation pad

• Disconnect power and water supply before starting any repair
• Access may require removing outer cabinet or panels; follow your model's service manual
• Use proper fasteners and placement as shown in OEM diagram; avoid altering material

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

Color: Chrome Shadow

The Top Panel is an OEM component specifically designed for Whirlpool washing machines. It is the decorative outer panel that forms the top surface of the washer. The panel serves an important protective role, shielding internal components from dust, moisture exposure and physical impact. 

Symptoms of a damaged top panel include:

• Cracks, gouges or breaks in the panel material
• Loose or misaligned fit over internal structures  
• Discoloration from household element exposure

Causes of failure could be normal wear over time from daily use, as well as direct impact or pressure damage. Protecting the life of this panel ensures an attractive appliance exterior.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This sound absorber is an appliance insulation pad designed to dampen normal operating noise and reduce vibration where mounted. It helps make refrigerators, dishwashers, and laundry appliances run quieter and feel more solid. What it does:

• Provides acoustic damping to reduce normal operational noise and vibration
• Cushions panels and components to limit rattling or buzzing sounds
• Helps improve perceived product quality by reducing noise transfer
• Safe symptom linkage: useful when normal appliance sounds seem louder than expected or panels vibrate during cycles

• One sound absorber/insulation pad

• High-level installation: locate the original pad position and attach the absorber in the same orientation
• Use manufacturer-recommended fasteners or adhesive; some models use clips or pressure-fit mounts
• Disconnect power before servicing appliances with electrical connections