Mvwx700xw Parts

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

Note: Bearings are only available with the gearcase assembly.

This replacement silverware/cutlery basket holds utensils securely during dishwasher cycles to keep items organized and allow thorough cleaning. Durable molded plastic resists staining and lets water and detergent reach utensils for better wash performance. What it does

• Holds forks, knives and spoons in place so utensils don't fall through the lower rack
• Allows water and detergent to circulate around cutlery for improved cleaning
• Helps prevent scoring and nesting of utensils for more even washing
• Restores organization to the dishwasher's lower rack when the original basket is cracked or missing

• One replacement silverware/cutlery basket

• No special tools required; simply set the basket into the lower dishwasher rack
• Handle carefully to avoid sharp utensils during installation
• Follow dishwasher manufacturer's safety instructions and disconnect power if recommended before servicing

This spacer positions and secures components in place to maintain proper alignment and clearance. It helps reduce vibration and wear by keeping parts correctly spaced inside the appliance. What it does:

• Provides stable separation between panels, brackets or components to ensure correct fit
• Helps prevent rubbing, vibration noise, and premature wear caused by misaligned parts
• Used where a precise gap or mounting offset is required for proper operation
• Commonly installed during repairs or when replacing damaged mounting hardware

• Inspect surrounding mounting points and fasteners; replace any stripped or damaged hardware
• Use correct fastener torque and avoid over-tightening to prevent deformation
• Disconnect power to the appliance before working in or near electrical components

Impeller cap that fits over the pump impeller to protect moving parts and help maintain proper water circulation. Replacing a cracked or missing cap helps reduce leaks and restore reliable pump performance. What it does:

• Covers and protects the pump impeller from debris and direct contact.
• Helps maintain correct water flow and impeller alignment inside the pump housing.
• A damaged or missing cap can cause reduced circulation, noisy operation, or leaks near the pump area.
• Small, inexpensive replacement that can prevent further pump damage when installed promptly.

• Disconnect power (and water if applicable) before accessing the pump area.
• Access may require removing an access panel or lower kick plate; keep fasteners and panels organized.
• Press the cap onto the impeller until fully seated; avoid forcing if resistance indicates other damage.
• Inspect the impeller and nearby seals while replacing the cap; replace the pump assembly or seals if they show wear.

This complete lid assembly replaces a damaged or broken washer top lid to restore secure closure and normal user access. It provides the hinged cover and latch interface needed for safe, splash-resistant operation. What it does:

• Replaces a cracked, warped or cosmetically damaged lid to restore proper sealing and appearance
• Provides the hinged cover and latch mounting points so the lid closes and stays secure during cycles
• Helps reduce splashing and keeps items contained in the wash tub
• Restores normal user access to the wash basket and controls area

• Disconnect power before starting any repair to avoid shock or injury
• Support the lid assembly during removal and installation to prevent dropping or damage
• Basic hand tools may be required; follow the OEM instructions for hinge and latch alignment

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This part is an control board that can be used as a replacement for a broken or malfunctioning control board in various washing machine models. This part ensures the washer functions, such as draining and filling, can be properly managed. In cases where the washer cannot be efficiently controlled, replacement will be immediately required. The control board will also need to be replaced if the user sees the F1 E1 error code. Before replacing this part, ensure the washing machine is unplugged from the power and water sources. Work gloves should be worn anytime a repair or replacement is attempted.This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This part is suitable for use on a variety of washing machine models that have been manufactured by Whirlpool, Maytag, Jenn-Air, and Amana. It is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

This sound absorber is an OEM-style insulation pad designed to reduce washer cabinet noise and rattling for a quieter cycle. It mounts inside the appliance cabinet to help dampen vibration and airborne sound. What it does:

• Dampens vibration and reduces cabinet noise during spin and agitation
• Helps minimize rattling from internal components for a quieter operation
• Supports stable operation by providing a cushioned barrier between parts and the cabinet
• Commonly replaced when padding is torn, missing, or compressed

• One sound absorber insulation pad

• Disconnect power and water supply before starting any repair
• Access may require removing outer cabinet or panels; follow your model's service manual
• Use proper fasteners and placement as shown in OEM diagram; avoid altering material

This replacement bezel fits around the washer lid lock assembly to restore appearance and help secure the lock. It provides a clean finish where the lid lock mounts and helps keep the latch area properly aligned. What it does:

• Replaces a cracked, broken or missing bezel that exposes the lid lock assembly
• Helps the lid lock sit flush so the lid can latch reliably
• Restores the washer's top appearance and prevents debris from entering the lock area
• Fits the factory lid lock opening and snaps or screws into place depending on model

• One bezel as shown

• Disconnect power to the washer before servicing to avoid electrical shock
• Remove the lid or access panel as needed to reach the lock area; retain screws and fasteners
• Align bezel over the lock assembly and secure by snapping or fastening per your model's configuration
• If the lid lock itself is damaged or the latch still won't engage after replacing the bezel, inspect the lock assembly and strike for wear