Pdf4085kf Parts

The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.

Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.

Symptoms of a bad flood switch include:

• The dishwasher stopping mid-cycle
• Water not filling or overfilling the dishwasher
• Error codes related to water level issues
• Leaks around the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers.

Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time.

Symptoms of a problematic jumper wire include:

• Intermittent or unreliable operation of wash cycle features
• Unresponsive touch controls and inability to start cycles
• Error codes displayed and failure to detect cycle outputs

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Door Vent Cover is an OEM part for GE dishwashers. This cover is designed to fit over the vent on the dishwasher door, allowing steam to escape while keeping the interior components protected from moisture and debris.

Common causes of a bad vent cover include physical damage from impact, warping due to prolonged exposure to high temperatures, and buildup of residues that can block the vent.

Symptoms of a bad door vent cover include:

• Visible cracks or breaks in the cover
•  Steam escaping from unexpected areas of the door
• Increased moisture inside the dishwasher
• Loose or poorly fitting cover

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm Assembly is an OEM replacement part for GE dishwashers. It is responsible for delivering powerful spray coverage to lower racks and delicate items.

Causes of a faulty spray arm can include mineral buildup clogging nozzles over time or broken/missing arm components inhibiting proper rotation.

Symptoms of a bad lower spray arm include:

• Reduced lower rack cleaning performance
• Nozzles that do not spray or mist properly
• Grinding or grinding noises during washing

Compatible with Hotpoint, Profile, and select Kenmore models as well, it restores full washing effectiveness throughout the dishwasher.

The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results.

The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying.

Symptoms of a bad ultra-fine filter include:

• Food particles or sediment left behind on dishes after the cycle completes
• Cloudiness or film remaining on glassware that is difficult to wipe away
• The shortened lifespan of other filter components due to excessive debris built-up

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Float is an OEM replacement part for GE dishwashers. Located in the dishwasher's sump area, the float plays an important role in detecting water levels and ensuring proper filling and draining during cycles.

Causes of a bad float include normal wear and tear, mineral buildup within the dishwasher, or accidental impact damage.

Symptoms of a bad float include:

• Improper or inconsistent water level filling the dishwasher
• Inability to fully drain water after cycles
• Delayed cycles or unusual noises related to water functions

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Countertop Screw & Buttonplug is an OEM part for GE dishwashers. This assembly includes screws and button plugs designed to securely fasten the dishwasher to the underside of kitchen countertops. 

Causes of a bad Countertop Screw & Buttonplug can include stripped threads from over-tightening, corrosion due to exposure to moisture, or general wear and tear that diminishes the screws' and plugs' ability to maintain a secure hold. 

Symptoms of a bad Countertop Screw & Buttonplug include:

• Dishwasher tilting forward when the door is opened
• Visible gaps between the dishwasher and countertop
• Loose feeling or movement of the dishwasher when pushed
• Screws failing to hold or remain in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Harness Assembly is an OEM part for GE dishwashers. As an essential wiring component, this harness electrically connects the multiple interior dishwasher door elements to the main control board.

Symptoms of a failed door harness include: 

• Lights or interior heating elements not functioning
• Inability to properly detect when the door is opened
• Faulty or disrupted communication between the door and the control board

Causes of a bad harness include wear and tear over time, repeated flexing and crimping from opening and closing the door, or moisture penetration degrading wires. 

For safety and full performance, replace the harness assembly at the first signs of trouble in your GE dishwasher. This part is also compatible with some Kenmore, Hotpoint, and RCA brand models.

The Water Valve Assembly is an OEM replacement part for GE dishwashers. It consists of multiple valves that work together to control water flow during different stages of the wash cycle.

Causes of a bad water valve assembly can include mineral buildup restricting flow, cracks developing in valve housings allowing leaks, and failure of components like solenoids or inlet/outlet valves.

Symptoms of a faulty water valve assembly include:

• Abnormal sounds or squealing during filling
• Inability to properly fill or wash dishes
• Slow, inconsistent, or no water circulation
• Water leaks in the valve area

This GE replacement is compatible with additional brands like Hotpoint, Profile, and select Kenmore models as well.

The Door Spring is an OEM part for GE dishwashers. This component is designed to provide the necessary tension to the dishwasher door, allowing it to open and close smoothly while ensuring it stays securely in place when shut.

Causes of a bad door spring can include wear and tear from regular use, overstretching due to excessive force, or corrosion from exposure to moisture over time. A compromised door spring can lead to issues with the door's balance and functionality.

Symptoms of a bad door spring include:

• Difficulty in opening or closing the dishwasher door
• The door not staying securely closed or dropping open suddenly
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Hinge Pulley is an OEM part for GE dishwashers. This part works with the door springs and cables to provide smooth and balanced movement. This pulley ensures that the door operates efficiently, making it easy to load and unload dishes.

Causes of a bad door hinge pulley can include wear and tear from regular use, accumulation of debris or grease, or damage from accidental impacts.  

Symptoms of a bad door hinge pulley include:

• The dishwasher door not staying open or closed properly
• Difficulty in opening or closing the door
• Unusual noises during door operation, such as squeaking or grinding
• The door feeling loose or unbalanced

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Fold Down Tine Indexer is an OEM part for GE dishwashers. It plays a crucial role in the flexibility and organization of the dishwasher's rack system. This indexer allows for the fold-down tines in the dishwasher rack to be adjusted or locked into place, providing customizable loading options for different sizes and types of dishes.

A malfunctioning indexer can limit the flexibility of the dishwasher rack, making it difficult to efficiently load various dishware.

Symptoms of a faulty Fold Down Tine Indexer include:

• Difficulty in adjusting or securing the fold-down tines in the dishwasher rack.
• Tines not staying in place, leading to inefficient dish loading.
• Breakage or visible wear of the indexer mechanism.
• Inability to accommodate different sizes or shapes of dishes effectively.
• Reduced overall efficiency in utilizing the space in the dishwasher rack.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

The Hub is an OEM replacement part for GE dishwashers. It is the central mechanism which attaches to the tub and facilitates rotation of the upper spray arm above dishes. 

Causes of a bad hub include wear from years of repeated rotation, accumulation of hard water scale deposits inside moving parts, or accidental impact damage. This reduces proper function over time.

Symptoms of a bad hub include:

• Loud clunking or grinding noises from the center mechanism
• Reduced cleaning performance on upper racks or portions of dishes  
• Dishes showing water spots or soil in sections not adequately rinsed
• Inability to attach or move the upper spray arm assembly smoothly

This OEM GE hub replacement is also compatible with Crosley, and KitchenAid models.

The Inner Door Panel is an OEM part for GE dishwashers. It serves as the inner lining of the dishwasher door, ensuring a watertight seal and supporting components like the detergent dispenser and vent assembly.

Common causes of a bad inner door panel include wear and tear from regular use, exposure to high temperatures and harsh detergents, or physical impacts that cause cracks or warping.

Symptoms of a bad Inner Door Panel include:

• Water leaking from the door area during operation
• Difficulty in opening or closing the door properly
• Visible cracks, warping, or other damage to the panel
• Malfunctioning detergent dispenser or other door-mounted components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.