Pdt525ssj0ss Parts

The Pulley Cable is an OEM part for GE dishwashers. As a component for proper door operation, the pulley cable works with internal springs to balance the door during opening and closing movements. 

Symptoms of a bad door pulley cable include:

• The door lacks proper closing assistance and slams shut  
• Difficulty opening or requiring extra force to move the door
• Door unable to fully latch or lock into position

Causes can be fractures in wire strands weakening cable strength over thousands of uses. Extreme bends also damage internal wiring over time. 

This OEM part is compatible with select Hotpoint, RCA, and Kenmore models, 

The Plastic Coarse Filter is an OEM replacement part for GE dishwashers. It refers to a screen fitted over the wash impeller that traps soil and food debris. Subject to constant exposure to water and detergents, plastic parts can wear down over many cycles. 

Symptoms of a bad coarse filter include:

• Clogged or blocked mesh no longer prevents large particles from entering the wash arm spray jets  
• Cracks along seams or mounting points where water can seep behind
• Brittle or broken crosspieces within the screen compromising structural integrity

Causes of failure relate to the chemical deterioration of plastic combined with physical stresses as debris repeatedly builds up and then dislodges during high-velocity rinse cycles.

This GE replacement part is also compatible with some Hotpoint and RCA models.

The Configured Machine Control Board is an OEM component specifically designed for GE dishwashers. Referred to as the "brains" of the appliance, this electronic module precisely orchestrates all wash and rinse systems. Subject to power demands and temperature fluctuations, boards can experience circuit failures.

Symptoms of a compromised control board include:

• Inoperative cycles with failure to initiate circulating or heating functions
• Unchanging defaults despite resetting and reprogramming option controls 
• Tripped circuit breakers or blown fuses despite diagnosing other components

Causes relate to cumulative electrical loads degrading conformal coatings over many cycles. Over time, moisture intrusion ruins sensitive surface-mount technology.

Replace yours today with this genuine GE OEM part to restore optimized cleaning performance. Centralized programming enhances customization for any load. This board replacement is also compatible with select Hotpoint and RCA models.

The Sump Overmold and Gasket Service Kit is an OEM part for GE dishwashers. Containing both the sump overmold and new gaskets, this kit replaces critical components in the lower dishwasher tub assembly.  

Causes of a bad sump or gaskets can include deterioration of rubber materials over multiple years of use and high heat. Mineral buildup during the wash cycle may also damage sealing surfaces.

Symptoms of a bad Sump Overmold and Gasket Service Kit include:

• Leaks or water entry in the bottom of the dishwasher 
• Excess moisture inside cabinet panels
• Inefficient or incomplete drying performance 

This genuine GE part is compatible with select Hotpoint, RCA and some Kenmore models as well.

The DRAIN PUMP ASM is an OEM component specifically designed for GE dishwashers. It is responsible for efficiently draining water from the dishwasher tub at the end of each cycle. 

Causes of a bad drain pump assembly can include a buildup of debris that causes clogs or hinders pump operation. Seals and gaskets may also deteriorate over time.

Symptoms of a bad drain pump assembly include: 

• Slow or incomplete draining of water at the end of cycles
• Puddles or standing water left in the bottom of the tub
• Strange noises or vibrations coming from the pump area
• Error codes related to draining issues

Proper drainage is essential for dishwasher performance and safety. Replacing the drain pump assembly with this genuine GE part helps restore thorough draining and ensures your dishwasher runs as intended.

This OEM GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore dishwasher models.

The Door Striker Assembly is an OEM replacement part for GE dishwashers. It is responsible for securing the dishwasher door and ensuring a proper seal during operation. It provides a reliable and secure connection between the dishwasher door and the latch mechanism, allowing for smooth and hassle-free opening and closing of the door.

Symptoms of a faulty door striker assembly include:

• Difficulty in closing the dishwasher door
• Loose or unstable door
• Water leakage around the door area

A bad door striker assembly can occur due to wear and tear over time, damage to the striker or latch, or misalignment. If you notice issues such as difficulty in closing the dishwasher door, a loose or unstable door, or water leakage around the door, it may be time to replace the old or damaged door striker assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Fill Funnel Cap seals the dishwasher's water inlet funnel at the rear of the tub. It creates a tight docking point for the upper rack feed tube, helping prevent leaks and maintain spray pressure for effective upper-rack cleaning.

• Seals the water inlet funnel and helps guide water into the upper wash system
• Helps maintain spray pressure to the upper rack for better cleaning results
• Reduces splashing and potential leaks at the funnel connection
• Symptoms include a cracked/missing cap, water dripping near the rear funnel, or weak cleaning on the upper rack

• Disconnect power and shut off the water supply before servicing
• Pull the upper rack forward to access the rear funnel area
• Release and remove the old cap; clean the sealing surface
• Align and snap/secure the new cap; verify the rack feed tube docks smoothly

The Main Control Board is an OEM component specifically designed for GE dishwashers. It controls washing functions, monitors performance, and ensures safe dishwasher operation. 

Causes of a bad control board can include faults in wiring or electronic components, moisture damage over time, or power surges that damage circuitry. 

Symptoms of a malfunctioning control board include:

• Cycles not completing or washing properly  
• Lights or displays not working
• Inability to control functions through buttons/switches
• Audible or visual error codes

This control board is also compatible with Hotpoint, RCA, and select Kenmore models.

This dishwasher fine filter sits beneath the lower spray arm and screens food particles before water is recirculated. Replacing a torn, warped, or clogged screen helps maintain cleaning performance and protects the circulation pump and spray system from debris. What it does:

• Screens fine food soils in the sump to help prevent recirculation during wash and rinse
• Helps protect the circulation pump and spray arms from debris
• Helps if dishes have gritty residue or soil redeposit after cycles
• Helps if the existing filter is torn, warped, or missing

• 1 fine filter

• Disconnect power at the breaker before servicing
• Remove the lower rack; remove the lower spray arm if required for access
• Rotate and lift out the old fine filter; clear any debris from the sump
• Seat the new filter flat and rotate to lock; reinstall any ultrafine filter

This replacement hose feeds the Bottle Jets/Bottle Blaster feature on compatible dishwashers. It carries wash water to the jet manifold so tall, narrow items receive targeted spray and helps prevent leaks from a cracked or brittle line. What it does:

• Routes wash water to the Bottle Jets/Bottle Blaster manifold for targeted cleaning
• Maintains a sealed path so jets can spray inside bottles and other narrow containers
• Common symptoms: leaks at the hose or connections, weak/no bottle-jet spray, visible cracks, kinks, or a loose hose
• Helps restore bottle-jet performance when the original hose is damaged

• 1 hose

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the dishwasher forward and/or remove rack components as needed to access both hose ends
• Transfer/secure clamps, fully seat the hose on each barb, and route it to avoid kinks or rubbing
• Reassemble and run a short test cycle while checking all connections for leaks

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Bottle washer clip is an OEM part for GE dishwashers. Located on the upper rack, it secures slender items like baby bottles, utensils, and cups in an upright position for optimal cleaning. 

Causes of a bad bottle washer clip include wear and tear over time which leads to cracking or breaking of the plastic. Accidental mishandling during loading could also damage it.

Symptoms include: 

• Bottles and other items falling over during the wash 
• Inability to stand items up securely
• Missing or broken plastic clips

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bottle Hose Cover is an OEM replacement part for GE dishwashers. It refers to the protective plastic sheath that sleeves the circulation hose carrying water between the appliance and sink. Subject to prolonged exposure to heat and chemicals, the hose cover material can degrade.

Causes of a bad bottle hose cover include:

• Brittle or cracking vinyl from chemical deterioration over time
• Loose fit or sliding off the hose allowing kinks or sharp bends to form
• Holes or gaps exposing the underlying tubing to potential punctures

Symptoms of a failed hose cover include:

• Water leaks at connections if tubing is unprotected 
• Restricted water flow due to crimped tubing from improper routing
• Unsightly tubing detracting from the overall aesthetic

This GE replacement part is also compatible with some Hotpoint and RCA models.

This third rack tray replaces the dishwasher's upper rack tray to restore a stable platform for small items and utensils. It helps keep items separated and positioned so wash water and detergent reach all surfaces. What it does:

• Provides a secure surface for small dishes, lids and utensils to prevent sliding or nesting during cycles
• Restores usable top-rack space so you can load more items without overcrowding lower racks
• Holds items in proper position to improve wash coverage
• Common replacement for trays that are cracked, warped or missing mounting tabs

• Slide the tray into the designated slots on the upper rack until the clips engage; no special tools are typically required
• Inspect rack rails and mounting clips for damage; replace clips separately if they are broken
• Wear work gloves to protect against sharp edges and follow the dishwasher owner's manual when servicing