Pdt525ssj0ss Parts

This dishwasher door wire harness assembly carries power and signals between the user interface/control and components in the door. Replacing a damaged harness restores reliable connections and can fix intermittent controls, no-starts, or cycles that stop when the door moves.

• Provides factory-terminated wiring path between the control/UI, latch, and other door-mounted components
• Replaces broken, pinched, heat-damaged, or corroded wires that interrupt electrical continuity
• Helps address symptoms such as unresponsive buttons, blank or flickering display, random beeps/lights, or unit won't start
• Operation changes when the door is opened/closed may indicate a failing door harness

• Disconnect power at the circuit breaker before servicing
• Remove the inner door panel to access the harness; support the panel to protect the UI/control
• Note original routing and connector locations; move one connector at a time, secure ties/retainers, and ensure grommets/strain reliefs are seated and wires are clear of hinges
• After reassembly, restore power and run a quick test cycle to verify operation

Vent fan assembly replaces the blower and housing that moves air through the appliance vent system, restoring proper exhaust airflow to help clear smoke, steam, and cooking odors. What it does:

• Replaces the vent blower that circulates exhaust; common symptom is reduced or weak airflow from the vent.
• Replaces a worn or damaged fan that causes loud, grinding, rattling, or unusual noises during vent operation.
• Restores effective exhaust to help remove steam, smoke, and cooking odors from the appliance.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Follow the appliance's service manual and wiring diagrams; you will need to remove access panels and unplug the old assembly from its wiring harness.
• Ensure the replacement assembly is oriented and mounted the same way as the original; secure all fasteners and reconnect wiring per the diagram.
• Restore power and test vent operation after installation; stop and re-check connections if the fan does not run or is unusually noisy.

The Wash Pump Assembly is an OEM part for GE dishwashers. As the component responsible for circulating water through the wash system, the wash pump plays a vital role in cleaning dishes effectively. 

Symptoms of a bad wash pump include:

• Incomplete or insufficient cleaning even on high heat cycles  
• Lack of water pressure through the spray arms
• Uneven wetting or saturation of dishes
• Strange sounds or vibrations coming from the tub area

Causes of wash pump failure can be mineral buildup clogging internal parts, worn-out motor brushes creating inefficient operation, or damage from debris entering openings in the pump body.

This genuine GE part is compatible with select Hotpoint, RCA, and some Kenmore models also.

The Door Harness Assembly is an OEM part for GE dishwashers. It routes power to key sensors and components located on the dishwasher door, including the door latch and interior lighting system. 

Causes of a bad Door Harness can include cracked insulation, pinched or cut wiring, or broken wire terminals due to repeated bending at connection points during door opening/closing cycles.

Symptoms of a bad Door Harness include:  

• Door latch not functioning properly
• Interior lighting not turning on 
• Delayed door locking or failure to latch fully
• Cycles not starting unless the door is firmly shut

Replace yours today with this genuine OEM GE part to ensure a proper seal and power delivery to key door systems. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

The Upper Rack Bracket Assembly is an OEM replacement part for GE dishwashers. It is located inside the dishwasher tub and functions to securely mount the upper dish rack. It allows for adjustable height positioning and prevents rack movement during washing.

Causes of a bad upper rack bracket assembly can include cracks or breaks in the mounting points, stripped screw holes allowing rack sway, or deformities preventing proper seating.

Symptoms of a bad upper rack bracket assembly include: 

• Loosening or detaching of the upper rack during the cycle  
• Restricted rack adjustment or inability to set desired height
• Noise or vibration from an unsecured rack vibrating against the tub

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Right-hand door trim that replaces damaged or worn outer trim to restore the door's appearance and protect the door edge. Fits the right side and matches OEM fit and finish for a factory look. What it does:

• Covers and protects the outer edge of the refrigerator/freezer door from chips, dents and wear
• Restores a finished appearance when original trim is cracked, broken or missing
• Holds the door edge trim in place and conceals mounting points and seams
• Common symptoms: visible cracks or breaks in right-side door trim, loose or missing trim, or cosmetic wear

• Disconnect power to the appliance before starting any repair
• Handle trim carefully to avoid scratching the finish or damaging clips

The Filter Coarse is an OEM component specifically designed for GE dishwashers. It refers to the screen installed before the wash pump that traps soil and food particles. Subject to continuous wear from both water circulation and collected debris, the filter mesh can worsen over time.  

Causes of a bad coarse filter include:

• Clogged perforations blocking drainage and reducing water pressure  
• Loose mounting clips releasing trapped soils back into wash water instead of tube drain 
• Stretched or warped mesh no longer shutting tight to form a watertight seal

Symptoms of a failed coarse filter include:

• Soil tracked throughout the dishwasher unseen 
• Excessive residue left on dishes after washing and rinsing cycles
• Puddling inside the tub or continuing sound of draining after the cycle ends

This GE replacement part is also compatible with some Hotpoint and RCA models.

This dishwasher drain hose carries wastewater from the drain pump to your home's drain or disposer. Replacing a damaged or clogged hose helps stop leaks and restores proper draining so cycles can complete reliably.

• Routes wastewater from the dishwasher's drain pump to the sink/disposer or standpipe
• Common symptoms of a failed hose: water left in the tub, slow or no drain, leaks under the unit, or water backing up at the sink
• Damage such as cracks, splits, kinks, or internal blockage warrants replacement
• Ensures a secure, leak-resistant path when properly routed and clamped

• Disconnect power and turn off the water supply before servicing; pull the dishwasher forward for access if needed
• Place towels or a pan to catch residual water; remove the old hose and any retained water carefully
• Route the new hose without kinks and create a high loop or use an air gap as required by local codes
• Secure both ends with appropriate clamps/fittings; if connecting to a disposer, ensure the disposer inlet knockout is removed; run a test cycle and check all joints for leaks

Size: 10-16 ab.

Replacement button and graphics assembly for the appliance control panel. Restores labeled buttons and the front-panel overlay so controls are easy to read and the console looks finished after repair. What it does

• Replaces worn, cracked, or faded button surfaces and printed graphics on the control console.
• Restores clear control labels so settings and icons are easier to read.
• Helps when markings peel, become illegible, or the overlay is cosmetically damaged.
• If buttons remain unresponsive after replacing the overlay, check the underlying switches and control board for electrical issues.

• 1 button and graphics assembly

• Disconnect power (unplug appliance or shut off circuit breaker) before beginning any work.
• Access typically requires removing the control console or top panel; keep fasteners organized for reassembly.
• Handle the printed surface carefully to avoid scratches, fingerprints, or smudging; align connectors and seating during installation.
• If problems persist after installation, inspect the button switches and control board.

Replacement fill funnel hose that routes incoming water into the appliance's fill system. Restores proper water flow to the fill inlet and helps stop leaks at the funnel connection when the original hose is cracked or worn. What it does:

• Channels incoming water from the inlet to the appliance fill assembly.
• Replaces cracked, split, or collapsed funnel hoses that can cause leaks.
• Common symptoms it can fix: water leaking at the funnel connection, slow or incomplete fill, water pooling beneath the appliance.
• Simple direct-replacement part—matches the original funnel hose routing and connection points.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect mating fittings, clamps, and seals; replace clamps or seals if corroded or damaged.
• Use basic hand tools to remove and secure hose clamps; avoid twisting or kinking the hose during installation.

This rack slide support secures the rack slide/rail inside your dishwasher, keeping the rack aligned so it rolls smoothly. Replace a cracked or missing support to restore easy rack movement and help prevent derailments.

• Anchors the rack slide/rail to the tub wall for stable support
• Keeps the rack level and properly aligned as it moves
• Allows the rack to glide in and out smoothly
• Common failure signs include a rack that sticks, sags, derails, or makes grinding/popping noises
• Replace if the bracket is cracked, warped, or missing

• Disconnect power and shut off water supply before servicing
• Remove the rack and release any rack stops as needed
• Detach the slide/rail from the old support and remove the support (tabs or screw)
• Install the new support in the same orientation; reattach the slide and rack and test rack travel

This bracket support hinge secures the appliance door to the cabinet, providing a stable pivot point for smooth opening and closing. Replaces a worn or broken hinge bracket to help restore proper door alignment and operation. What it does:

• Provides a mounting point for the door hinge to keep the door aligned and secure
• Prevents door sagging, uneven gaps, or misaligned closing caused by a damaged bracket
• Reduces wobble, clicking, or binding at the hinge area during door movement
• Works as the structural support between the door and cabinet to maintain proper sealing/contact

• One bracket support hinge

• Disconnect power and empty the door (shelves/drawers) before starting for safety and easier handling
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use basic hand tools; follow OEM torque and alignment guidance when tightening fasteners

This sump manifold directs wash and drain water into the washer's pump assembly, ensuring proper drainage and circulation. Replaces a cracked or leaky housing to restore reliable water flow and help prevent leaks. What it does:

• Channels tub water to the drain pump so the washer can drain properly.
• Prevents leaks by sealing the pump inlet and connections.
• Commonly replaced when the manifold is cracked, warped, or leaking.
• Helps resolve symptoms like water pooling in the washer tub or visible leaks under the appliance.

• Disconnect power and water supply before starting any repair.
• Drain remaining water from the washer and remove front or rear access panel as needed.
• Inspect and replace any worn gaskets or seals when installing the new manifold.
• Tighten connections evenly; avoid overtightening plastic fasteners to prevent cracking.