Pdt845sblts Parts

This side blaster assembly mounts to the dishwasher's tub wall and directs a focused spray into the wash cavity to help scour stuck-on residue. Replace if the nozzle is cracked, clogged, or leaking to restore proper cleaning performance.

• Provides targeted side-wall spray to supplement the main wash arms
• Helps flush debris and improve coverage along racks and corners
• Common failure signs: weak or no side spray, poor cleaning near the side wall, visible cracks, or leaks at the side jet
• Restores intended spray pattern and water distribution when the original is damaged or blocked

• Disconnect power and turn off the water supply before servicing
• Remove the lower rack to access the side blaster location
• Release the retainer/screw, disconnect the hose/tube, and install the new assembly; ensure the sealing surface is clean and properly seated
• Reconnect, secure, and run a test cycle to check for leaks and proper spray

This replacement flood stem holds and guides the washer's water-level float so the machine can detect and control water levels. Replaces a worn or damaged mounting tube to restore reliable float operation. What it does:

• Secures and positions the water-level float inside the tub or housing
• Allows the float to move freely so the machine senses proper water level
• Helps prevent overfill and incorrect fill-level behavior when functioning correctly
• Common symptoms of a faulty unit: incorrect water level, washer overfills or fills unevenly, or the machine shows fill/drain issues

• One flood stem

• Disconnect power and turn off the water supply before starting any repair
• Replacement typically requires access to the washer cabinet/top or inner tub area
• Handle the float and tube gently to avoid damage; ensure proper seating and alignment during reassembly
• After installation, run a short fill/drain cycle to confirm correct float operation and that there are no leaks

The Upper Rack Bracket Assembly is an OEM replacement part for  GE dishwashers. It is located inside the dishwasher tub and functions to securely mount the upper dish rack. It allows for adjustable height positioning and prevents rack movement during washing.

Causes of a bad upper rack bracket assembly can include cracks or breaks in the mounting points, stripped screw holes allowing rack sway, or deformities preventing proper seating.

Symptoms of a bad upper rack bracket assembly include: 

• Loosening or detaching of the upper rack during the cycle  
• Restricted rack adjustment or inability to set desired height
• Noise or vibration from an unsecured rack vibrating against the tub

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Console Top Control is an OEM replacement part for GE dishwashers. It is located at the top center of the dishwasher console and is responsible for operating all cycle and option buttons via touch controls. 

Causes of a bad console top control can include cracks or breaks in the physical buttons/display, malfunctions in the electronic control board, or water damage.

Symptoms of a bad console top control include:

• Unresponsive or stuck buttons  
• Inaccurate or intermittent cycle/setting displays
• Repeated cycle error messages
• Complete lack of responsiveness requiring hard reset

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Conduit Main Assembly is an OEM replacement part for GE dishwashers. It is installed within the dishwasher tub below the upper wash arm, and is responsible for securely mounting and holding the upper wash arm in place during operation.  

Causes of a bad upper wash arm support include:

• Symptoms of a bad upper wash arm support include: 
• Vibration or noise from an unsecured wash arm
• Improper alignment of spray pattern
• Restricted rotation of the wash arm during washing  
• Leaks at the tub connection point

Symptoms can include cracks or breaks that compromise its structure, or wear over extended use without replacement.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Variable Wash Pump Kit is an OEM part for GE dishwashers. The wash pump governs water distribution through the wash arms during cycles, thoroughly rinsing dishes clean. Its variable speed function precisely regulates water pressure for optimized washing performance.

Causes of a bad pump kit can include:

• Clogged impeller inhibiting proper water circulation
• Worn internals reduce pumping efficiency
• Seal or bearing failure causing leaks or noises

Symptoms of a faulty pump kit involve:

• Low or inconsistent water pressure from the arms
• Remaining food or residue left on dishes
• Reduced cleaning ability or spotting issues
• Strange noises emitting from under the appliance

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

This is a 6-20 machine screw, 3/8 inch length, used to secure trim, panels, or small components on compatible cooking appliances. Replacing a missing or damaged screw helps keep parts tight and prevents rattles or shifting during use.

• Fastens brackets, panels, or trim in the appliance chassis
• Helps restore a secure fit when the original screw is stripped or lost
• Can resolve issues like loose trim, minor rattling, or misaligned panels
• Nickel finish for corrosion resistance in warm, humid environments

• Disconnect power and allow appliance to cool before servicing
• Remove only the necessary adjacent fasteners to access the mounting point
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Replace any missing clips or spacers originally used with the screw

This detergent plate is the replacement dispenser component that holds and releases detergent during the wash cycle, ensuring detergent is delivered when the machine runs for proper cleaning performance. What it does

• Holds detergent inside the dispenser area until the wash cycle calls for release.
• Opens or allows detergent to be flushed into the wash chamber at the correct time.
• Common symptom: detergent stays in the dispenser and doesn't release, leaving dishes or laundry soiled.
• Common symptom: damaged, cracked or warped plate can prevent proper release or seating of detergent.

• One detergent plate

• Disconnect power (and water if applicable) before accessing the dispenser to avoid shock or injury.
• Handle the plate carefully; plastic parts can crack if forced or over-tightened.
• Remove the door/dispenser trim per your model's service instructions to access the plate; reinstall ensuring proper alignment so the dispenser seals and operates correctly.

This clip secures the fold-down tine row to the flat rack in your dishwasher, keeping the section stable during loading and washing. Replace a broken or missing clip to stop collapsing tines and restore smooth rack function. What it does:

• Holds the fold-down tine assembly to the rack wire
• Helps tines stay upright or folded as intended
• Addresses a loose, wobbly, or collapsing tine row
• Common replacement when the original clip cracks or goes missing
• Reduces rattling caused by an unstable tine section

• Disconnect power at the breaker before servicing.
• Remove the rack to access the clip location.
• Note orientation; snap the new clip onto the rack wire/tine bar until fully seated.
• The tine row moves smoothly and locks as intended before reinstalling the rack.

This fixed dishrack bracket secures one end of a rack component (such as a fold-down tine row), keeping it anchored during wash cycles. Replace a cracked or missing bracket to restore stable support and reliable rack function.

• Anchors a rack component to the dishrack in a fixed position
• Helps keep dividers/tines aligned so dishes stay upright
• Replaces a broken, worn, or missing bracket
• Symptoms may include loose or collapsing tines, dishes tipping, or visible bracket damage

• Unload and extend the rack; remove the rack if needed for access
• Release the locking tabs/clips and remove the damaged bracket
• Align the new bracket and snap/slide it fully into place until it locks
• Verify a secure fit and smooth rack movement; wear gloves to protect hands
• Some racks use both fixed and adjustable brackets—confirm the side you need before ordering

This dishwasher door wire harness assembly carries power and signals between the user interface/control and components in the door. Replacing a damaged harness restores reliable connections and can fix intermittent controls, no-starts, or cycles that stop when the door moves.

• Provides factory-terminated wiring path between the control/UI, latch, and other door-mounted components
• Replaces broken, pinched, heat-damaged, or corroded wires that interrupt electrical continuity
• Helps address symptoms such as unresponsive buttons, blank or flickering display, random beeps/lights, or unit won't start
• Operation changes when the door is opened/closed may indicate a failing door harness

• Disconnect power at the circuit breaker before servicing
• Remove the inner door panel to access the harness; support the panel to protect the UI/control
• Note original routing and connector locations; move one connector at a time, secure ties/retainers, and ensure grommets/strain reliefs are seated and wires are clear of hinges
• After reassembly, restore power and run a quick test cycle to verify operation

Vent fan assembly replaces the blower and housing that moves air through the appliance vent system, restoring proper exhaust airflow to help clear smoke, steam, and cooking odors. What it does:

• Replaces the vent blower that circulates exhaust; common symptom is reduced or weak airflow from the vent.
• Replaces a worn or damaged fan that causes loud, grinding, rattling, or unusual noises during vent operation.
• Restores effective exhaust to help remove steam, smoke, and cooking odors from the appliance.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Follow the appliance's service manual and wiring diagrams; you will need to remove access panels and unplug the old assembly from its wiring harness.
• Ensure the replacement assembly is oriented and mounted the same way as the original; secure all fasteners and reconnect wiring per the diagram.
• Restore power and test vent operation after installation; stop and re-check connections if the fan does not run or is unusually noisy.

This fold-down tine clip secures the collapsible tine row on the rack, helping hold dishes in place and letting the tines lock upright or fold flat for flexible loading. Replace a broken or missing clip to restore proper rack function.

• Attaches a fold-down tine row to the rack's wire frame so it pivots properly
• Helps the tines stay upright or lay flat as designed for flexible loading
• Can help resolve a loose or detached tine row and dishes tipping during cycles
• Common signs include a cracked, warped, or missing clip and tines that won't stay in position

• Disconnect power and shut off water before servicing
• Pull out the rack; remove it from the tub if needed for better access
• Note the original clip's orientation and location on the rack wires
• Snap the new clip fully into place and verify smooth fold-up/lay-flat action before use

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

The Upper Rack Bracket Assembly is an OEM replacement part for GE dishwashers. It is located inside the dishwasher tub and functions to securely mount the upper dish rack. It allows for adjustable height positioning and prevents rack movement during washing.

Causes of a bad upper rack bracket assembly can include cracks or breaks in the mounting points, stripped screw holes allowing rack sway, or deformities preventing proper seating.

Symptoms of a bad upper rack bracket assembly include: 

• Loosening or detaching of the upper rack during the cycle  
• Restricted rack adjustment or inability to set desired height
• Noise or vibration from an unsecured rack vibrating against the tub

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Filter Coarse is an OEM component specifically designed for GE dishwashers. It refers to the screen installed before the wash pump that traps soil and food particles. Subject to continuous wear from both water circulation and collected debris, the filter mesh can worsen over time.  

Causes of a bad coarse filter include:

• Clogged perforations blocking drainage and reducing water pressure  
• Loose mounting clips releasing trapped soils back into wash water instead of tube drain 
• Stretched or warped mesh no longer shutting tight to form a watertight seal

Symptoms of a failed coarse filter include:

• Soil tracked throughout the dishwasher unseen 
• Excessive residue left on dishes after washing and rinsing cycles
• Puddling inside the tub or continuing sound of draining after the cycle ends

This GE replacement part is also compatible with some Hotpoint and RCA models.