Pdt845sblts Parts

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bottle blaster assembly supplies targeted wash water to the dishwasher's Bottle Jets to clean tall, narrow items like baby and sports bottles. Replace a damaged or clogged assembly to restore focused spray and top-rack cleaning performance. What it does:

• Routes wash water to the bottle jet nozzles for concentrated cleaning inside bottles and narrow openings
• Helps improve cleaning on items positioned over the Bottle Jets
• Failure symptoms include no spray from the bottle jets, poor upper-rack cleaning, leaks near the jet area, or visible cracks/damage

• 1 bottle blaster assembly

• Disconnect power and shut off water to the dishwasher before servicing
• Access the bottle jet area; release retaining clips/fasteners and note hose routing and connection points
• Transfer any reusable clips or seals from the original assembly if needed
• Fully seat connections; run a short cycle to check for leaks and proper jet spray

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

This upper rack fold-down tine assembly replaces worn or rusted tines on your dishwasher's top rack. It restores secure, adjustable support so cups, bowls, and small items stay upright and protected during the wash.

• Provides adjustable rows of coated tines on the upper rack to hold items in place
• Folds flat to make room for larger dishes when needed
• Helps prevent tipping, chipping, and poor cleaning from items falling over
• Common signs: broken or missing tines, peeling coating and rust, items not staying upright on the upper rack

• Disconnect power to the dishwasher before servicing
• Pull the upper rack forward; release end stops to remove the rack if needed
• Unclip and remove the old fold-down tine assembly; align and snap the new assembly onto the rack wires in the same position
• Verify the tines fold and lock properly before running a cycle

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This adapter conduit routes and protects appliance wiring where the harness transitions between components. It helps keep wires organized and prevents chafing or pinching that can cause electrical faults. What it does

• Guides and shields wiring between appliance components to reduce wear
• Keeps wire routing secure to prevent loose or pinched connections
• Helps maintain reliable electrical continuity by protecting wire insulation
• Can prevent intermittent power or control issues caused by damaged wiring

• One adapter conduit

• Disconnect power (unplug or shut off breaker) before inspecting or replacing wiring components
• Handle wiring gently and avoid sharp bends; route conduit to match original path
• Use existing mounting points and hardware; secure conduit so it cannot rub on edges
• If wiring shows damage, replace or repair the harness per manufacturer instructions.

This bezel and console cover is the exterior front panel that surrounds and protects the dryer control area, restoring a clean appearance and securing buttons and displays for reliable operation. What it does:

• Replaces a cracked, broken, or warped front console bezel that exposes controls or wiring
• Restores proper button alignment and keeps control components covered
• Prevents debris and moisture from reaching the control area
• Improves the appliance's appearance by replacing faded or damaged trim

• Disconnect power (unplug or turn off circuit breaker) before starting any work.
• Removal typically requires removing screws and carefully disengaging retaining clips; keep hardware organized for reassembly.
• Handle the bezel carefully to avoid scratches and damaging mounting tabs or clips.

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

A replacement rack cover handle for the dishwasher upper rack that restores a secure grip and smooth rack operation. Replaces a cracked, broken or missing handle so you can load and unload dishes more easily. What it does

• Attaches to the front of the upper rack to provide a handle for pulling the rack in and out.
• Restores proper alignment and prevents the rack cover from snagging when loading dishes.
• Replaces a handle that is cracked, loose, or broken and reduces the risk of cuts from sharp plastic edges.
• Helps maintain normal rack movement and prevents accidental rack drops.

• One rack cover handle.

• Disconnect power to the dishwasher before servicing to avoid electrical hazard.
• Empty the rack and remove any clips or stops as needed to access the handle mounting points.
• Requires basic hand tools (screwdriver or nut driver) to remove and install fasteners; keep track of any small clips or screws.
• Test rack movement after installation and do not overtighten fasteners to avoid cracking the replacement part.