Pdw 9280Looss Parts

This adjustable leveling leg replaces a worn or damaged support foot to stabilize and level the appliance, reducing rocking and helping ensure even operation. Easy to adjust for a secure, balanced fit under the appliance. What it does

• Provides a stable, adjustable support foot to level the appliance on uneven floors
• Helps stop rocking, vibration, and noise caused by an unbalanced appliance
• Restores correct appliance height for proper door/clearance alignment and drainage
• Compatible with standard screw-in mounting used on many GE laundry appliances

• One adjustable leveling leg

• Turn off and unplug the appliance and empty loads before adjusting or replacing legs
• Raise or tilt the appliance slightly using appropriate tools or a helper to access the mounting point
• Thread the leg in/out to adjust height, then confirm stability and even weight distribution on all legs
• If multiple legs are worn, replace all feet to maintain proper leveling and balance

This spring washer provides a tensioning/retaining function to keep fasteners and components secured under vibration and movement. It helps maintain proper assembly alignment and reduces the chance of parts working loose over time. What it does:

• Applies spring tension to fasteners to prevent loosening from vibration
• Helps keep assemblies aligned and components seated correctly
• Can reduce rattling, vibration noise, and intermittent contact caused by loose parts
• Restores proper clamping force when worn or damaged washers allow play

• One spring washer

• Disconnect power to the appliance before beginning any repair
• Use appropriate tools to remove fasteners and note component orientation
• Replace only with the exact part number to ensure correct fit and function

This trim tub flange is the finished plastic ring that fits around the washer tub opening to restore appearance and help maintain a snug fit between the tub and the cabinet. It keeps the front of the tub looking clean and helps support the door seal area. What it does:

• Replaces worn or cracked tub trim to restore a clean, finished look
• Helps hold the tub edge trim in place so the door seal mates properly
• Reduces gaps where moisture or lint can collect around the tub opening
• Prevents rubbing or catching of the door boot or gasket on a damaged edge

• One trim tub flange

• Disconnect power and water supply before starting any repair
• Remove the washer cabinet or front panel as needed to access the tub flange
• Use basic hand tools; avoid prying on plastic parts to prevent damage
• Test fit before final reassembly and ensure gaskets/seals seat correctly

This tub trim flange is the replacement trim that snaps around the washer tub opening to cover the edge and restore the appliance's finished appearance. It helps maintain a proper seal and prevents fabric snags and water spray at the tub lip. What it does:

• Covers and protects the exposed tub edge for a clean, finished look
• Helps keep the door seal aligned and reduces risk of water spray from the tub opening
• Prevents clothing from catching on rough or damaged tub edges
• Replaces cracked, broken or warped trim that can cause cosmetic and sealing issues

• Disconnect power and turn off water supply before starting any repairs
• Remove the outer panel or door opening trim as needed to access the tub flange
• Carefully pry out the old trim and snap the new flange into place, ensuring even seating around the tub
• If you find additional damage to the seal or surround, inspect and replace those parts as needed

This trim tub flange restores the finished edge around the washer tub opening, covering the gap between the tub and door for a clean seal and smooth appearance. It helps prevent snags and keeps the cabinet opening protected. What it does:

• Covers and protects the tub opening edges, improving appearance and reducing fabric catch points
• Helps keep the door seal aligned and reduces airflow around the door opening
• Commonly replaced when the trim is cracked, warped, or missing, or when it no longer secures properly
• Fits onto the tub face and secures with factory fasteners or clips

• One trim tub flange

• Disconnect power and water before starting any repair
• Remove the door and any retaining screws or clips to access the trim; retain fasteners for reassembly
• Inspect the door boot/seal and surrounding components for wear while replacing the trim

This flapper vent is the replacement exhaust flap that helps control dryer airflow and keeps outside air, pests and debris from entering the vent when the dryer is off. Fits many GE dryer exhaust housings. What it does

• Opens during dryer operation to let moist air escape and closes when the dryer is off to block backdrafts.
• Restores proper airflow when a damaged or stuck flap is preventing venting.
• Helps reduce outside odors, drafts and pest entry through the exhaust opening.
• Works as a simple mechanical replacement—no electrical connections.

• Disconnect the dryer from power and, if applicable, turn off gas before servicing.
• Access the exterior vent or the dryer exhaust housing; replacement typically secures with screws or snaps into the vent housing.
• Inspect and clean the vent duct and housing before installing the new flap to ensure proper operation.

This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:

• Secures access panels, covers, or internal components to prevent rattling and movement
• Helps maintain proper alignment of parts so doors and panels close correctly
• Replaces missing, stripped, or broken screws that can cause loose parts or noise
• Restores the appliance's original fit where a matching OEM fastener is required

• One replacement screw

• Turn off and unplug the appliance before starting any repair
• Use the correct driver and avoid over-tightening to prevent stripping threads
• If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions

This handle assembly replaces a damaged or worn refrigerator fresh-food door handle to restore a secure grip and straight door appearance. It provides a factory-fit replacement that mounts where the original handle attaches. What it does:

• Replaces a cracked, loose or broken fresh-food door handle
• Restores a safe, comfortable grip for opening the refrigerator door
• Corrects misaligned or crooked handle appearance
• Helps the door latch and seal operate normally by providing proper handle support

• One handle assembly as shown

• Unplug the appliance or disconnect power before beginning any repair
• Keep original fasteners; install with the same screws or clips provided and tighten snugly — do not overtighten
• Handle with care to avoid scratching the door finish; wear gloves to protect hands from sharp edges