Pgr484ggzs/04 Parts

Unfortunately, despite some dedicated efforts on the part Audrey Patrick and others, the problem was not solved. I replaced the door hinges, liner and gasket, but none of these solved what I believe is a flawed design. Thankfully, AppliancePartsPros generous return policy allowed me to pursue the repair without risking the cost of failure. My thanks to the company and to all those who were involved. Read more

I ordered a broiler pan insert and pan from AppliancePartsPros.com. Very happy with it and Customer Service was outstanding! I highly recommend this company for any of your appliance parts. I know I will definitely be a repeat customer! Read more

Very easy fix. Remove oven door by just opening it slightly and pulling up. (an easy way to clean it too). Then, with a phillips screw driver, remove two screws holding the damaged element in place. Slowly pull the element toward the front a couple inched to expose the wires. Disconnect the wires (no tools needed), remove the old element and replace it with the new. Reverse the past few steps and re-attach the wires and screw. Simple as that. I also chose to replace the Broiler Element as a... Read more

Used thick pad on kitchen table to hold oven door. Open door to first position (broil) and used soft leather gloves to lift up and remove. Door is heaver than it looks. Used screw driver to remove all screws from bottom and side trims. Removed side trims then bottom trim. It was not part of the repair, but I removed front glass to clean. There was some rust stuck on the glass from the old trim. Need to watch position of little spacers that are under the glass. With front glass in place,... Read more

Replaced bottom plate Read more

I have a sealed cook top gas range. I lifted the cook top without removing the burner set screws thus breaking the two gas tubes to the front burners...dumb move. I ordered two new burner orifice assemblies and replaced the broken ones in about 15 minutes. It's a very easy fix. Remove burners by turning counterclockwise, unhook ignitor and ground wires, remove set screw (one under each burner), lift range top, loosen the brass nuts on each gas tube, remove damaged assemblies. Install new... Read more

Thanks to your video.i had to make some adjustments to the part.the bracket L shape .original part was flat.how ever looks like its working. Read more

I used to have a ferret that liked to steal socks but I did not know she had been crawlinging into my stove to hide stuff. She had made a nest out of the insulation but did not hurt any wires. I cleaned up the sides of my stove and noted that the wires and mechanisms were all fine. I knew all I needed was the side and top wrap of insulation. I went to the hardware store, they didn't carry it. All the local companies, including box stores also stated it was "out of stock." I got on the... Read more

Ordered a new module from AppliancePartsPros.com and had it fixed in an hour. Read more