Psa9240 Parts

This tapping pan-head screw secures interior panels and components in appliances, providing a low-profile head and threads that form into metal for a firm hold. It's a direct-fit fastener for repairs and replacements. What it does

• Fastens panels, brackets and small appliance components where a self-tapping screw is required
• Pan-head profile gives a flush, low-profile finish that resists snagging
• Threads cut into mating metal to create a secure attachment without a nut
• Commonly used where sheet-metal or thin-frame fastening is needed

• One tapping pan-head screw

• Use the correct screwdriver bit that matches the screw recess to avoid stripping
• Start in a pilot hole or with light initial pressure to ensure proper thread formation
• Tighten until snug; do not over-torque — overtightening can strip threads or deform panels
• Wear eye protection when working with metal fasteners and sheet metal

The Vent Grille is an OEM part for GE microwave ovens. It is located at the top of the appliance to safely vent heated air and moisture outside during operation. 

Causes of failure can be normal wear over time, impact damage, or exposure to extreme heating levels during cooking.

Symptoms of a bad vent grille include:

• Reduced air flow causing interior components to overheat
• A loose or detached grille that poses a potential hazard  
• Openings that allow small items to fall down behind the microwave
• A warped or discolored surface affecting the appliance's appearance

This original GE replacement grille is also compatible with Hotpoint, RCA, and select Kenmore microwave models.

This is the microwave's magnetron—the high-voltage tube that generates microwave energy to heat food. Replacing a failed magnetron can restore normal heating performance and consistent cooking. What it does and common symptoms:

• Produces the microwave energy that heats and cooks food
• Microwave runs but doesn't heat
• Loud humming or buzzing from the high-voltage section
• Trips the internal fuse or household breaker at start-up
• Unusual burning odor indicating an internal short

• 1 magnetron

• Unplug the microwave; the high-voltage capacitor can retain a dangerous charge even when unplugged.
• Handle the antenna dome carefully; avoid touching or contaminating its surface.
• Transfer any required brackets, insulators, or thermal cutouts from the original part as designed; ensure correct orientation and secure mounting for proper cooling.
• Reinstall all covers, grounds, and door-interlock components exactly as designed before testing.

This door latch spring restores the correct return tension in the latch mechanism so the door secures and releases reliably. Replacing a fatigued or broken spring brings back smooth latch action and dependable door operation. What it does:

• Provides the return tension for the door latch mechanism
• Helps the latch engage and release properly
• Common failure signs include a door that won't latch or pops open, or a latch lever that feels loose or sticks
• Some cycles may not start if the door isn't recognized as closed

• 1 door latch spring

• Disconnect power before servicing
• Access the latch mechanism; note the spring's original routing and anchor points
• Use needle-nose pliers and eye protection when removing/attaching the spring
• Test latch movement and door operation before reassembly

This microwave choke cover snaps over the inner edge of the door to conceal and secure the door's RF choke assembly. Replacing a damaged or missing cover restores a finished look and helps ensure proper door shielding and latch alignment.

• Covers and protects the door's RF choke area/liner
• Helps maintain correct door fit and shielding performance
• Common symptoms: loose or missing inner door trim, cracked/broken cover, gaps around door edge, rattling from door area
• Color/finish and texture may vary by model application

• Disconnect power to the microwave before servicing
• Use non-marring tools to release clips and avoid scratching the door
• Transfer any reusable clips/tabs from the old cover if required by your model
• Press firmly around the perimeter to seat all retaining tabs; inspect for even gaps

This lamp bracket secures the oven/range light assembly in place so the bulb and socket stay aligned for reliable interior lighting. It restores a stable fit when the lamp or housing is loose or mispositioned. What it does:

• Holds the lamp socket or housing firmly to the appliance cavity to prevent movement and rattling.
• Maintains proper lamp alignment so the bulb illuminates the cooking cavity as intended.
• Helps reduce intermittent lighting or poor contact caused by a loose bracket.
• Fits into the lamp/light housing area and provides a mounting point for the bulb assembly.

• One lamp mounting bracket.

• Disconnect power to the appliance before starting any repair to avoid shock hazard.
• Remove the bulb and any trim or covers to access the bracket; handle the bulb with gloves or a cloth.
• Typical installation uses basic hand tools; keep track of screws and orientation for reassembly.
• If wiring or the lamp socket is damaged, inspect and replace those components separately.

This control mounting panel secures the appliance control/console assembly, providing a stable mounting surface that helps keep buttons, switches, and electronics aligned for reliable operation and easier repairs. What it does:

• Provides a rigid mounting surface for the control/console assembly
• Keeps control board and user interface components properly aligned
• Helps prevent movement or vibration-related contact issues
• Common replacement for cracked, bent, or damaged control panels that misalign controls

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing the console or outer panel; keep fasteners organized
• Handle the control board and connectors carefully to avoid damage

A replacement charcoal filter that helps reduce food and refrigerator odors to keep interior air fresher. Fits compatible refrigerator filter housings and installs easily so your fridge smells cleaner between replacements. What it does

• Uses activated charcoal to help absorb and reduce food and lingering odors inside the fresh-food compartment
• Helps maintain fresher-smelling air when opening the refrigerator door
• Works with the refrigerator's air circulation system to target airborne odors and impurities
• Common symptom: persistent or strong food odors or a stale smell inside the fridge

• Follow your refrigerator owner's manual for exact filter location and replacement procedure
• Replace with same orientation as the original; handle with clean hands and avoid contaminating the filter media
• Dispose of the used filter per local regulations

This control knob restores safe, easy operation of a stove or range control. It replaces a cracked, melted, or missing knob so you can adjust burners or oven settings with a secure grip and clear feel. What it does:

• Fits onto the appliance control shaft to select burner or oven settings
• Replaces damaged, loose, stripped, melted, or missing knobs
• Provides a firm, tactile grip for precise control
• Helps prevent accidental changes by seating securely on the shaft

• Disconnect power (and gas, if applicable) before servicing the appliance
• Remove the old knob by pulling it straight off the control shaft
• Align the knob with the control shaft splines and push firmly until fully seated
• If the knob does not install easily, verify shaft alignment and do not force.

This replacement control knob lets you select cooktop or oven heat settings with a secure, easy-to-turn grip. Restores a damaged, worn or missing knob so temperature and function selections operate normally. What it does:

• Fits onto the appliance control shaft to set burner or oven temperature and modes
• Replaces cracked, stripped or missing knobs that are hard to turn or won't stay set
• Provides a clear tactile stop and position for accurate control selection
• Helps eliminate slipping or loose rotation caused by worn knobs

• One replacement control knob

• Push-on installation: align splines with the control shaft and press firmly until seated
• Turn power off at the appliance or breaker before accessing internal components
• Do not force onto the shaft; if it does not fit, verify shaft type and knob orientation
• If the original knob is damaged at the shaft or insert, the switch may also require replacement

This stainless steel control panel houses the range/oven front controls and restores the appliance's finished appearance and mounting surface for the user interface. Durable metal replaces damaged or cosmetically worn panels. What it does:

• Replaces a scratched, dented, or bent front control panel to restore the unit's appearance
• Provides the mounting surface for control knobs, buttons, and the display assembly
• Helps maintain proper alignment and secure attachment of the control components
• Suitable when the original panel is warped, cracked, or has cosmetic damage

• One stainless steel control panel

• Designed to mount in place of the original panel;
• Handle panels carefully to avoid scratches; wear gloves to protect finish
• Power must be disconnected before removing or installing any control components
• Reuse original fasteners unless replacements are specified by the manufacturer

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.