Pseed Queen Parts

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Paddle Dispenser is an OEM part for GE refrigerators. Located inside the freezer compartment door, this electronic assembly dispenses cubed ice on demand through a motorized steel ice paddle. 

Causes of a bad paddle dispenser include freeze damage from leaked water entering electronic components. The motor or gearing may degrade after extended use over time.

Symptoms include:

• Failure to dispense ice or jamming of the paddle mechanism  
• "Ice" or "Select" lights remaining illuminated without operation
• Audible grinding or ticking noises coming from inside the door  

This GE OEM replacement ensures convenient access to ice at any time. With high-reliability engineering even in cold freezer temperatures, it restores dependable operation for automatic ice retrieval. Suitable for retrofitting some Hotpoint, RCA, and Kenmore freezer doors as well. Keep drinks chilled easily and safely.
 

This recess grille fits the refrigerator's water/ice dispenser well. It supports your cup and helps catch drips, restoring a clean, finished look in Dorian Gray when the original insert is cracked, stained, or missing.

• Sits in the dispenser recess to provide a stable surface for cups during dispensing
• Helps collect minor drips and splashes to keep the area tidy
• Direct replacement when the original grille is broken, warped, discolored, or missing
• Common symptoms include rocking cups, pooled water on the shelf, or a worn appearance

• Typically tool-free: lift out the old grille from the dispenser recess
• Clean and dry the recess before installing the new insert
• Set the new grille in place and ensure it sits flat and properly aligned

This intermediate freezer wire harness restores reliable electrical connections within the freezer section. It bridges the cabinet wiring to freezer components so they receive the power and control signals needed for consistent operation and dependable cooling performance.

• Provides a secure, plug-in connection between the main cabinet harness and freezer components
• Replaces harnesses with broken conductors, brittle insulation, or heat-damaged connectors
• Can help when freezer components have intermittent or no power, or when visible wiring/connector damage is present
• Maintains correct routing and strain relief to reduce chafing and shorts

• Disconnect power and wear cut-resistant gloves before servicing
• Photograph connector locations and wire routing for reference during reassembly
• Route the new harness along the original path; secure in existing clips/ties and avoid pinching or stretching wires
• Fully seat each connector until it latches; restore power and test operation

This door hinge thimble—also called a hinge bushing—is a small sleeve that fits into the refrigerator door's hinge bore to act as a bearing for the hinge pin, helping the door open and close smoothly and stay aligned.

• Provides a low-friction bearing surface between the hinge pin and door
• Helps maintain proper door alignment and closing performance
• Can reduce squeaks, scraping, or binding caused by a worn or missing bushing
• Replace if cracked, deformed, or if the door sags or doesn't swing smoothly

• Disconnect power and support the door before removing hinge hardware
• Remove hinge cover and screws, lift door off the hinge pin, and access the thimble in the door
• Pull out the old thimble and press the new thimble fully into the hinge bore
• Reinstall and align the door; verify gasket seal and hinge fasteners are secure

The GRILL RECESS is an OEM replacement part for GE refrigerators. Located below the external dispenser bar, it captures any accidental spills or overflow during beverage dispensing. 

Causes for failure can include warping or cracking from prolonged exposure to wet environments. Mineral buildup may impact drainage.

Symptoms include:

• Puddles forming around the base of the dispenser due to missed spills   
• Drain holes becoming blocked inhibiting proper runoff
• Damage preventing secure fastening of the drip tray in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

Replacement dispenser housing shield that protects internal dispenser components and restores a clean, finished appearance. Fits the dispenser area and helps prevent damage from spills or impacts while improving dispenser alignment and usability. What it does:

• Shields internal dispenser parts from spills, debris and everyday wear.
• Restores proper fit and finish to the dispenser opening for consistent cup placement.
• Common replacement when the dispenser guard is cracked, broken, warped or missing.
• Helps reduce risk of leaks and keeps controls and mechanisms covered.

• Disconnect power to the appliance before starting any repair.
• Typically requires removal of the dispenser front or trim; basic hand tools recommended.
• Retain or transfer any clips, screws or brackets during replacement.

This interface dispenser assembly replaces the dispenser control and user keypad to restore responsive button control and dispenser feedback. It provides a direct-fit replacement for the refrigerator dispenser interface so the dispenser and display operate correctly. What it does:

• Replaces the dispenser control/keypad that registers user inputs for water, ice, and other dispenser functions.
• Restores unresponsive or intermittent dispenser buttons and touchpad feedback.
• Helps correct dispenser-related error messages or non-responsive display indicators tied to the interface.
• Transmits user commands to the dispenser mechanism and communicates status to the main control.

• One interface dispenser assembly.

• Disconnect power to the appliance before starting any repair to avoid shock.
• Remove dispenser bezel and any trim panels to access the assembly; keep track of fasteners and clips.
• Handle the assembly and connectors carefully to avoid bending pins or damaging flex circuits.
• After installation, reconnect power and test dispenser functions before reassembling all trim.

This is a replacement cover for the refrigerator dispenser bucket that restores the dispenser opening and helps contain and direct dispensed contents for cleaner operation and improved appearance. What it does:

• Replaces a cracked, broken, or missing dispenser bucket cover that can let ice or water escape
• Helps guide dispensed items into the cup or container to reduce spills
• Restores a finished look to the dispenser area
• Prevents debris from entering the dispenser bucket

• One dispenser bucket cover

• Disconnect power to the appliance before beginning any repair
• Typically installs by aligning and snapping into place or securing with the original fasteners; retain any removed clips or screws for reassembly
• Handle plastic parts carefully to avoid cracking during installation

This LED light cover protects and diffuses the refrigerator's interior LED lighting, improving light distribution while shielding the lamp from spills and impact. It restores a finished appearance and prevents direct glare from exposed LEDs. What it does:

• Diffuses and softens interior LED light for even illumination.
• Protects the LED module from splashes, dust, and accidental contact.
• Helps prevent direct glare from exposed bulbs for clearer visibility.
• Replaces cracked, yellowed, or missing covers that affect light quality.

• One LED light cover.

• Disconnect power to the appliance before removing or installing parts to avoid shock.
• Typically snaps into place or secures with a small screw; handle gently to avoid cracking.
• Inspect mounting tabs and nearby lamp housing for damage; replace any broken hardware before reinstalling.
• Use gloves or a clean cloth to avoid fingerprints or scratches on the diffuser.

This freezer door light switch restores interior lighting control so the freezer light turns on and off when the door opens and closes. It's a direct-replace switch that helps make it easier to see frozen items and check temperatures. What it does

• Actuates the freezer interior light when the door opens and closes
• Replaces a worn or stuck door switch that leaves the light always on or off
• Prevents unnecessary light-related power draw and helps avoid frost/moisture near the lamp area
• Fits in the door jamb where the original door plunger or actuator contacts the switch

• One replacement freezer door light switch

• Disconnect power to the appliance before starting any repair
• Access may require removing interior trim or the freezer door liner—keep fasteners organized
• Verify actuator/plunger alignment and smooth door operation before reassembly

This interface dispenser assembly is the front control panel that operates the refrigerator's water and ice dispenser functions, restoring user controls and button feedback for normal dispensing. It provides a direct replacement for a worn or unresponsive dispenser interface. What it does:

• Houses the user buttons and switches used to select water, cubed or crushed ice, and dispenser light.
• Transmits user commands to the dispenser control board so selections are executed.
• Restores tactile button response and status indicators when the original panel is cracked, unresponsive, or faded.
• Can resolve symptoms like unresponsive dispenser buttons, missing indicator lights, or physical damage to the front dispenser face.

• One interface dispenser assembly

• Disconnect power to the appliance before starting to reduce shock risk.
• Some models require removing the dispenser trim or inner door panel to access mounting screws and wire connectors.
• Handle connectors and ribbon cables gently; ensure connectors are fully seated during reassembly.