Psg25sgmhcbs Vertical Freezer Parts
Genuine Ge part
By: Ge
Part Number: WR71X10360
$47.28
- Compare At:
-
$47.37
- You Save:
-
$0.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR87X26271
$304.97
- Compare At:
-
$360.28
- You Save:
-
$55.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR49X10233
The Torsion Spring is an OEM part for GE refrigerators. It is essential for maintaining the proper tension and operation of the refrigerator door. This spring ensures the door closes smoothly and stays securely shut, preventing cold air from escaping and maintaining the appliance’s efficiency.
Causes of a bad torsion spring can include metal fatigue from regular use, corrosion from exposure to moisture, or damage due to excessive force or mishandling. Over time, these factors can weaken the spring, affecting the door’s performance.
Symptoms of a bad Torsion Spring include:
- Door not staying closed
- Difficulty in opening or closing the door
- Door feels loose or unbalanced
- Unusual noises when operating the door
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water line in door kept freezing. Charles N. • Mcdonough , GA • October 15, 2017
Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR49X10144
The Slide Rail is an OEM part for GE refrigerators. It is designed to support and guide the movement of drawers and shelves within the refrigerator, ensuring smooth and effortless access to stored items. The slide measures approximately 7 inches. This assembly contains 2 slides
Over time, slide rails can become worn out or damaged due to frequent use, exposure to heavy loads, or accidental mishandling.
Symptoms of a bad slide rail include:
- Drawers or shelves not sliding smoothly
- Difficulty in opening or closing drawers or shelves
- The drawer or shelf becoming misaligned or stuck
- Noticeable wear or damage to the rail
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my glides broke where they are riveted Ricardo R. • New Rochelle , NY • May 27, 2016
First I had to remove the right glide that had 2 screws. with a T-20 star bit. Then
I did the same to the left glide . replacing both glides I just reversed the process.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10801
Do-It-Yourself Stories from Customers like You
The shield was melted near the light bulbs Jeff G. • Woodbine , MD • May 18, 2022
Under five minutes. Remove old shield and replace with new.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10190
Do-It-Yourself Stories from Customers like You
Ice dispenser motor not working ice auger had a broken blade Ray D. • Conroe , TX • August 30, 2021
Replaced motor and solenoid cube along with dispenser auger. Simply watched video on repair and installation and really had no problem. My refrigerator is so old that one of the holes in the motor did not align properly. Had to drill another hole to mount the motor to the housing, took ten minutes. The ice auger took the longest as I was afraid of breaking the plastic housing trying to get the tabs to release. Had to watch the video twice to make sure I got the blades back in the right order....
Read more
More
Genuine Ge part
By: Ge
Part Number: WR14X10096
Do-It-Yourself Stories from Customers like You
Broken damper asm supply Craig P. • Beaumont , TX • October 27, 2019
Replaced Damper. The iron gasket was sent the I ordered the damper
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10839
This is the top light shield for the refrigerator interior that protects the light assembly and helps direct illumination across the compartment. Replaces a cracked or missing shield to restore proper light coverage and appearance. What it does:
- Covers and protects the interior light assembly from food contact and spills
- Helps diffuse and direct light for clearer visibility inside the compartment
- Prevents direct bulb exposure, reducing risk of breakage and soiling
- Commonly replaced when cracked, melted, discolored, or missing
What's included:
- One top interior light shield
Install notes:
- Disconnect power to the appliance before starting any work
- Remove shelves or clips as needed to access the shield; handle plastic parts gently to avoid cracking
- Reinstall carefully so the shield seats securely on its mounting points; do not force or overtighten fasteners
- If the light bulb was exposed, replace with the correct rated bulb per manufacturer instructions
More
Genuine Ge part
By: Ge
Part Number: WR1X1763D
Do-It-Yourself Stories from Customers like You
Broken refridgerator meat drawer slides Bruce D. • Chichester , NH • December 14, 2014
Purchased new slides and screws and replaced them both.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10810
Genuine Ge part
By: Ge
Part Number: WR2X8203
Do-It-Yourself Stories from Customers like You
The refrigertor compressor was making a loud noise when the unit was cycling off Nathaniel J. • Bossier City , LA • January 08, 2017
I ordered a clip retainer which hold the compressor in place. First, I discovered there are four clips and the one which I could easily move or turn by hand I ordered a replacement. The part came fast. In less than two minutes I had completed the repair.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR71X10314
Do-It-Yourself Stories from Customers like You
Bought fridge used Marc R. • Suwanee , GA • July 17, 2014
This part was missing, so I bought the replacement part.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10552
Do-It-Yourself Stories from Customers like You
Ge side by side psc25 series ff section was not cooling well (42 degrees best it could do) Robert B. • Morgantown , WV • October 19, 2014
Common theme on the blogs was thermistors and or defrost heater/thermostat. Ran self-diagnostics which turned on defrost heater which was fine. All five thermistors indicated ok on diagnostic also, but I read more than one time "replace the thermistors no matter what if your FF section isn't cooling". So I ordered all five thermistors and defrost limiter thermostat. Received all in 48 hours (great shipping service), took me about three hours to replace all thermistors and thermostat just as...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X11481
Genuine Ge part
By: Ge
Part Number: WR21X10032
Genuine Ge part
By: Ge
Part Number: WR2X4561
Do-It-Yourself Stories from Customers like You
The ice maker did not crush ice Joy U. • Galveston , TX • October 02, 2016
When we inspected the first time we found that
Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will...
Read more
More