Psls3ffbfsf Parts

Includes 12 washers.

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This Custom Cool tray is the refrigerator shelf insert that provides a flat, stable surface in the Custom Cool compartment and helps contain minor spills. It replaces a cracked, warped, or missing tray so refrigerated items sit level and clean. What it does:

• Provides a stable shelf surface in the refrigerator's Custom Cool compartment
• Helps contain small spills and prevents liquids from dripping onto lower compartments
• Restores proper fit and appearance when the original tray is cracked, warped, or broken
• Supports refrigerated items and small containers for safer storage

• One Custom Cool tray

• Disconnect power to the refrigerator before working on interior components
• Remove all items from the compartment and lift out the old tray; handle carefully to avoid cuts if cracked
• Align the replacement tray with the shelf guides and slide into place until fully seated
• Refer to the refrigerator owner's manual or manufacturer service instructions for model-specific guidance

This slide and bracket assembly replaces a worn or broken refrigerator drawer slide to restore smooth opening and secure drawer support. Designed to align and guide the drawer while preventing sagging or binding. What it does:

• Replaces the drawer slide and mounting bracket so the drawer glides correctly
• Supports the weight of the drawer and its contents to prevent sagging
• Helps stop sticking, rough movement, or misalignment when opening/closing the drawer
• Restores proper drawer tracking for full insertion and removal

• One slide and bracket assembly

• Intended for refrigerator drawer application; verify fit against your OEM part number before ordering
• Basic hand tools required; follow manufacturer's service manual for access and removal steps
• Disconnect power or unplug the appliance if accessing electrical components nearby
• If fasteners or clips are damaged, replace them with OEM-specified hardware

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This auger helix is the rotating spiral that moves ice from the freezer bin to the dispenser chute, restoring reliable ice delivery when the auger is worn, broken, or missing. Designed to match OEM fit and function. What it does:

• Translates motor rotation into axial movement to push ice through the dispenser chute
• Restores consistent ice flow when previous helix was stripped, cracked, or bent
• Reduces jamming and grinding caused by damaged or worn flights
• Works with the dispenser auger assembly to ensure measured ice delivery

• One auger helix

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and dispenser auger housing per manufacturer instructions
• Inspect mating components and replace if damaged
• Do not force fit; align helix and test dispenser operation before reassembling

This replacement freezer wire basket restores organized storage and easy access to frozen foods. It snaps into existing shelf supports to keep loose items contained and make loading and unloading simpler. What it does:

• Holds and contains frozen foods and packaged items to prevent shifting
• Restores usable storage space when the original basket is broken or missing
• Keeps small or loose items grouped for easier access
• Helps maintain an orderly freezer so items are easier to find

• Install on the appropriate shelf supports or rails; verify correct orientation before seating
• No special tools typically required; lift and engage the basket into place
• Handle carefully to avoid bending the wire or damaging adjacent components

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This side gasket seals the chill compartment, helping maintain proper temperature and reduce frost and moisture buildup for consistent food storage. It replaces worn or torn side seals to restore the compartment's closing surface. What it does:

• Replaces damaged or hardened side seal material to improve the compartment's seal.
• Helps reduce air leaks that can cause temperature fluctuations or excess frost.
• Supports efficient cooling by maintaining a tighter seal around the chill area.
• Can resolve symptoms like cold loss in the chill compartment, visible gaps, or condensation/frost near the seal.

• High-level swap: remove the old seal, clean the mounting surface, and press the new seal into the channel until fully seated.
• Use mild soap and water to clean surfaces; avoid harsh solvents that can damage plastic.
• If adhesive or fasteners are present, retain or replace them per the model's instructions.
• Disconnect power only if required by your model's service instructions; follow all safety guidance.

This tuckaway shelf assembly replaces the fold-down shelf that stores and supports items while allowing extra vertical space when folded up. It restores the shelf's folding function so you can fit taller items or keep standard items organized. What it does:

• Provides a fold-up shelf surface that supports food and containers inside the refrigerator
• Folds up/out of the way to create clearance for taller items on lower shelves
• Secures into a stable position when extended to hold everyday loads
• Helps keep refrigerator contents organized and accessible

• Unplug the refrigerator or disconnect power before beginning service
• Empty and remove surrounding shelves or items for safe access
• Handle shelf components carefully to avoid chipping or cracking
• Follow OEM instructions for proper alignment and secure mounting

This is a mobility screw used to secure mobility-related components in compatible appliances, providing a reliable fastener for stable operation and correct alignment. It replaces worn or missing screws to restore secure mounting. What it does

• Fastens and secures mobility/bracket components to prevent movement or misalignment.
• Helps maintain proper alignment of moving parts that can cause noise or binding when loose.
• Commonly replaced when mounting points are stripped, damaged, or missing.
• Small replacement part that supports overall appliance stability and safe operation.

• One screw as shown/packaged by the manufacturer.

• Use the correct screwdriver or bit to avoid stripping the screw head.
• Ensure the appliance is powered off and disconnected from the power source before accessing internal components.
• Do not overtighten; snug to manufacturer torque or until the part is secure.
• If mounting hardware or threaded inserts are damaged, replace or repair those components before installing this screw.

This upper freezer tower bracket secures the ice/tower assembly inside the freezer, keeping the tower aligned so ice fills and dispenses correctly. It restores proper support to reduce movement and rattling. What it does:

• Holds the upper section of the freezer/ice tower in position to maintain alignment
• Prevents tower movement that can cause noise or interfere with ice delivery
• Helps keep internal components stable so ice fills and dispenses normally
• Supports proper fit of surrounding trim and panels

• Disconnect power to the refrigerator before beginning any work
• Remove ice bin and any nearby trim for safe access to the tower area
• Use appropriate tools and retain original fasteners; replace damaged fasteners if needed
• Inspect surrounding components for damage and test ice operation after installation

This adjustable leveling screw replaces a worn or damaged leg adjustment used to raise, lower, and level the appliance for stable operation. It restores proper fit and helps reduce rocking and uneven appliance height. What it does:

• Provides height adjustment to level the appliance on uneven floors
• Stabilizes the unit to reduce rocking and vibration
• Helps align doors and drawers that hang or bind due to uneven stance
• Works as the threaded lower leg/adjuster for proper weight support

• Disconnect power and water and move the appliance to access the leveling assembly safely.
• Support the appliance with a jack or block before removing or adjusting legs to prevent tipping.
• Turn the screw with an appropriate wrench or pliers; adjust gradually and check level frequently.
• If the leg assembly includes a mounting bracket, keep fasteners secure and replace any worn hardware.