Pss-26Mgpb-Cc Parts

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

Includes 12 washers.

A small metal retainer spring that secures trim and lightweight components so panels and shelves stay aligned and do not rattle. Replaces a worn or broken spring to restore a snug, reliable fit. What it does

• Holds trim, panels or lightweight components in position to prevent sagging or separation
• Stops rattling and vibration caused by loose parts
• Restores correct alignment of removable trim or small assemblies
• Helps maintain proper component engagement during normal use

• One retainer spring

• Disconnect power (unplug or switch off circuit) before working on appliances
• Use basic hand tools; access may require removing adjacent trim or clips
• Handle spring and surrounding trim carefully to avoid scratches or damage
• Replace damaged or missing mounting hardware before reassembly

This cam closure is the small plastic latch that helps the freezer door align and stay closed, restoring a tight seal for efficient cooling and preventing frost buildup. Fits the freezer door hinge area and replaces worn or broken closures. What it does:

• Guides and secures the freezer door into the closed position for a reliable seal
• Replaces broken, cracked, or missing cam closures that let the door sag or catch
• Helps reduce air leaks that can cause frost buildup or higher energy use
• Works with the freezer hinge/cam assembly to maintain proper door alignment

• Disconnect power before working on the refrigerator to avoid electrical or injury risk.
• Remove the freezer door or inner liner panels as required to access the cam closure; follow the refrigerator model service manual.
• Install the cam in the correct orientation and ensure smooth door movement and alignment before reassembly.
• If hinges, screws, or adjacent parts are damaged, inspect/replace those parts as needed for a lasting repair.

This mobility front assembly replaces the worn front caster/roller that helps a refrigerator glide when pulled out for cleaning or service. Restores smooth forward movement and stable front support for safe access. What it does:

• Provides a rolling front support so the appliance moves smoothly on the floor
• Helps stabilize the front of the refrigerator when it is pulled out or pushed in
• Reduces sticking and uneven movement caused by worn or damaged rollers
• Can help minimize scraping or surface damage during repositioning

• One mobility front assembly

• Disconnect power and, if applicable, water supply before servicing
• Empty or secure loose items and have a second person help when tilting or moving the appliance
• Remove the kickplate or access panel as required to reach and replace the front assembly
• Tighten fasteners to OEM torque and test mobility before returning the appliance to normal use

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions

This bottom hinge and pin assembly secures and supports the lower refrigerator/freezer door, allowing smooth pivoting and proper alignment for reliable opening and closing. It replaces a worn or bent hinge to restore door stability. What it does:

• Provides a stable pivot point for the lower door to ensure correct alignment and smooth operation
• Helps prevent door sagging, rubbing, or misalignment that can cause poor sealing or uneven gaps
• Fits the lower hinge location and transfers door weight to the cabinet frame
• Works with existing hinge housing and mounting points to restore factory movement

• Turn off power to the appliance and remove all items from the door before starting
• Support the door securely while removing and installing the hinge to avoid injury or damage
• Use appropriate hand tools; tighten fasteners to secure but avoid over-torquing

This recessed trim piece replaces a bowed or damaged trim that surrounds a refrigerator recessed handle, restoring a clean appearance and secure fit. It covers the trim opening and helps keep the handle area sealed and finished. What it does:

• Replaces bent, warped or bowed recessed trim around the door handle area
• Restores the finished look and helps hold the handle trim in place
• Reduces gaps where dirt or moisture can collect near the handle
• Helps prevent the trim from catching or snagging when opening the door

• Disconnect power to the appliance before starting work when required for your model
• Remove door handle or existing trim per your model's service instructions to access trim
• Align trim in the recess and snap or fasten into place; avoid forcing or prying to prevent damage
• If trim clips are broken, replace clips as needed

This light bezel is the trim piece that surrounds and secures the refrigerator/freezer interior lamp, providing a finished appearance and helping keep the lamp in place. It restores a clean fit and prevents light lens movement. What it does:

• Holds the interior lamp assembly or lens in position and covers the lamp opening
• Replaces cracked, broken, or warped trim that lets the lens rattle or sit unevenly
• Helps maintain a sealed appearance around the lamp to reduce light glare and gaps
• Compatible with appliances that use the matching OEM bezel design

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the bezel and lamp lens carefully to avoid cracking; use appropriate tools for retaining clips or screws
• If replacing the lamp or lens, confirm bulb type separately
• Reassemble in reverse order and test the lamp for proper fit and operation after installation

This replacement cover hinge secures and supports the appliance access cover, restoring proper alignment and smooth opening/closing. It's a direct-fit part that helps stop sagging or loose covers and reduces rattling during operation. What it does:

• Replaces a worn or broken cover hinge to restore proper cover alignment and operation
• Helps stop cover sagging, uneven gaps, or covers that won't stay closed
• Reduces rattling or vibration caused by a loose hinge
• Matches white trim for a clean, factory appearance

• High-level fit: installs at the cover mounting point using the factory screws or clips
• Safety first: disconnect power to the appliance before beginning any repair
• Handle trim pieces carefully to avoid scratching or cracking during removal/installation