Pvm7020skiss Parts

This AC ventilation motor powers the appliance's vent/ventilation fan to move air for cooling and airflow control. Replacing a failing motor restores proper ventilation, reduces overheating risk, and helps maintain normal operation. What it does:

• Spins the vent fan to circulate air through the appliance enclosure or vent housing
• Helps prevent component overheating by maintaining airflow
• Supports cooling and ventilation functions tied to proper appliance performance
• Resolves symptoms like reduced or no fan airflow, unusual fan noise, or overheating alerts

• Always disconnect power to the appliance before starting work
• Handle the motor and wiring harness carefully; avoid damage to connector pins and mounting surfaces
• Verify this PN matches the part on your appliance before installation

This control panel assembly restores the front user interface and buttons on the appliance, matching the dark dorian finish for a factory appearance. It replaces a cracked, faded, or unresponsive control panel to regain normal control access. What it does:

• Houses the oven/range user controls and front-facing buttons for input and display interaction.
• Replaces panels that are cracked, cosmetically damaged, or have worn button labels.
• Restores reliable button response when the original panel has failed or become loose.
• Helps fix issues where the control surface is broken but the underlying electronics are intact.

• Turn off power to the appliance at the breaker before starting any work.
• Installation requires removing the outer console or trim; keep screws and small parts organized.
• Handle the panel carefully to avoid scratching the finish or chipping edges.

The Turntable Motor is an OEM part for GE microwaves. It is responsible for rotating the glass turntable plate during cooking, ensuring food is evenly heated throughout the microwave cavity. 

Symptoms of a bad turntable motor include:

• The turntable not spinning at all or rotating unevenly
• Loud grinding or clicking noises coming from the motor area  
• The turntable plate wobbles excessively during the operation

Causes can be normal wear and tear over time from continuous use, failure of electronic components in the motor, or damage from heavy loads or impact. This GE replacement motor restores even cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today before a minor problem becomes a major repair bill. Continued use without a properly functioning turntable can damage other microwave components.
 

The Turntable Shaft is an OEM part for GE built-in and over-the-range microwaves. It acts as the central hub on which the turntable platter smoothly rotates during the cooking cycle. 

Causes of a problematic shaft can include wear from prolonged use creating play or friction in rotational movement. Debris intrusion into the central bearing assembly can also affect smooth operation over time.

Symptoms of a bad shaft include: 

• Turntable that no longer spins consistently or doesn't turn at all
• Grating or grinding noises coming from below the turntable 
• Imbalanced cooking results affecting some areas more than others

This GE replacement shaft ensures even heating by allowing for uniform distribution of microwave energy throughout cooking. Compatible with GE Profile, Hotpoint, and select Kenmore units, it restores reliable functionality before further troubles develop.
 

The Latch Support is an OEM part for GE microwaves. It is a component that helps guide and secure the latch mechanism as it fastens the microwave door closed.

Causes of bad latch support include normal wear and tear from repeated door openings and closings, damage from excessive force applied to the door, or failure of stabilizing clips or mounts.

Symptoms of a bad latch support include:  

• The latch catching or sticking during opening/closing  
• Difficulty fully engaging or disengaging the latch
• Noise or vibration emanating from the latch area
• Misalignment or wobbling of the door in the closed position

This OEM GE replacement part is also compatible with Hotpoint, RCA and select Kenmore microwave models.

This locker secures the appliance door, helping it stay closed for proper operation and temperature control. Replace a worn or broken locker to restore a positive latch and prevent accidental openings. What it does:

• Holds the door closed so seals can maintain proper temperature and prevent drafts
• Replaces a cracked, loose, or broken locker that prevents the door from latching
• Helps stop doors from swinging open during use or transport
• Linked to symptoms like a door that won't stay shut, cold loss, or intermittent door rattling

• Disconnect power to the appliance before accessing door components
• Remove the exterior door panel or trim as required to reach the locker; keep small fasteners organized
• Handle plastic tabs and clips gently to avoid breakage; replace any damaged clips

This damper is the oven vent assembly that controls airflow and venting during cooking, helping the oven purge steam and maintain consistent temperatures. Replacing a faulty damper restores proper vent operation and helps improve cooking performance. What it does:

• Opens and closes the oven vent to regulate airflow and release steam during bake/broil cycles
• Helps maintain proper cooking temperatures by directing exhaust flow
• A failed damper can cause poor temperature recovery, uneven baking or unexpected venting behavior
• Works as the airflow control component in the oven vent system

• Disconnect power to the appliance before starting any repair
• Installation typically requires basic hand tools (screwdriver, nut driver); follow the service manual for disassembly steps
• Handle sheet metal and vents carefully — wear gloves to avoid cuts

The H.V. Diode is an OEM component specifically designed for GE microwaves. It serves an important electrical purpose as a high-voltage rectifier that converts incoming AC power into DC power required to operate the microwave. During use, the H.V. diode regulates high voltage output sent to the magnetron tube for cooking. 

Causes of a bad H.V. diode failure can include excessive heat stress and deterioration over many years of intermittent use.

Symptoms of a bad H.V. diode include:  

• Magnetron not receiving proper voltage and failing to ignite
• Inability to heat or partially cooking foods  
• Burning/melting smells detected from inside unit
• Electrical shorting or buzzing noises occur
• Microwave not operating or functioning erratically

This OEM GE replacement part is compatible with Hotpoint, RCA and select Kenmore microwave models.

This lamp bracket secures the oven/range light assembly in place so the bulb and socket stay aligned for reliable interior lighting. It restores a stable fit when the lamp or housing is loose or mispositioned. What it does:

• Holds the lamp socket or housing firmly to the appliance cavity to prevent movement and rattling.
• Maintains proper lamp alignment so the bulb illuminates the cooking cavity as intended.
• Helps reduce intermittent lighting or poor contact caused by a loose bracket.
• Fits into the lamp/light housing area and provides a mounting point for the bulb assembly.

• One lamp mounting bracket.

• Disconnect power to the appliance before starting any repair to avoid shock hazard.
• Remove the bulb and any trim or covers to access the bracket; handle the bulb with gloves or a cloth.
• Typical installation uses basic hand tools; keep track of screws and orientation for reassembly.
• If wiring or the lamp socket is damaged, inspect and replace those components separately.

This high-voltage transformer supplies the elevated voltage needed by a microwave's magnetron so the oven can produce heat. Replacing a faulty transformer restores proper high-voltage delivery for normal cooking performance. What it does:

• Steps up incoming power to the high-voltage circuit that drives the magnetron
• Commonly replaced when the microwave stops heating or produces weak heat
• Can be a cause of blown internal fuses, unusual noises, or burning/smoke odors in the microwave
• Works with other high-voltage components to generate microwave energy

• One high-voltage transformer

• High-voltage circuits retain lethal charge; always unplug the appliance before servicing and discharge the high-voltage capacitor before touching components
• Inspect related parts for damage—replace any damaged components to avoid repeat failure

This fan assembly replaces a failed refrigerator fan to restore proper airflow and help maintain even cooling. It combines the fan motor and blade in one ready-to-install unit for straightforward replacement. What it does:

• Circulates air inside the refrigerator or freezer compartment to help maintain consistent temperatures
• Replaces a worn or noisy fan that causes rattling, buzzing, or reduced airflow
• Helps prevent frost or ice buildup caused by poor air circulation when functioning correctly
• Stops operation-related symptoms like compressor overrun from restricted airflow

• Disconnect power before accessing the appliance and wear gloves to protect against sharp edges
• Remove interior panels and mounting screws to access the old fan; record screw locations for reassembly
• Handle the fan blade carefully to avoid bending or damaging it during install
• After installation, restore power and verify the fan runs quietly and circulates air as expected

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.

This coupler is a direct-replacement shaft coupler that joins two rotating components to transfer torque and maintain alignment. It restores reliable mechanical connection so the appliance can resume normal rotation or agitation. What it does

• Joins motor and driven shafts to transmit rotation and torque
• Restores secure connection when a worn or broken coupler prevents movement
• Helps stop slipping, intermittent rotation, or loss of drive between components
• Commonly replaced when the appliance no longer spins, agitates, or drives a drum or assembly

• Disconnect power to the appliance before starting any repair
• Access the coupler location; basic hand tools typically required
• Inspect mating shafts and fasteners for wear and replace if damaged
• Reassemble panels and test operation after power is restored

This heater holder is the mounting bracket that secures the oven heating element in place so the element stays aligned for reliable heating and safe operation. It helps prevent movement that can cause uneven cooking or damage. What it does:

• Holds and stabilizes the oven/heater element in the cavity so it stays properly positioned
• Keeps the element from contacting other components, reducing the risk of shorts or damage
• Helps maintain even heat distribution by preventing element sagging or misalignment
• Fits where the element mounts and supports normal operation of the heating circuit

• One heater holder/mounting bracket

• Turn power to the appliance off at the breaker before servicing to avoid shock
• Inspect the element and surrounding insulation for damage when replacing the holder
• Typically secures with screws or clips—retain hardware and note orientation for reassembly