Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Suspected Magnetron failure so I ordered replacement. Unplugged unit and let it sit for a couple of days. Removed it from the wall/range top mounting Removed cover. Unplugged terminals to capacitor; one at a time; carefully kept leads away from each other There were (4) main screws holding the magnetron in position; removed those. Removed the thermal sensor that was attached to the magnetron housing Re-attached the thermal sensor to new magnetron housing Re-attached the new... Read more
14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more
Problem was the primary interlock switch. The switch checked OK for continuity but when installed and activated by the door closing, the switch would not close due to the over travel in the switch caused by the door lever. That would have been easy and inexpensive, however when attempting to disconnect RY2 while troubleshooting the top of the relay came out which was impossible to reassemble. That mistake cost me a new main board ($180). SO, if you disconnect the relay hold the top in place... Read more
Replaced the PBC Board and it works like a charm now. Shane with the chat line emailed the service manual which was a tremendous help. Read more
Called appliancepartspros for some help.They suggested the noise filter was bad I also checked the thermostats found one of them bad.Replaced both items did bring unit back to life but still would not heat,it appears there are problems with the megatron also found some burnt wires on the transformer took it to the repair shop.Would not have got that far if it had not been for the appliancepartspros giving me some help. Read more
I replaced the circuit board which contained the display. Read more
I tested the three door switches and they functioned correctly II replaced the smart board and now when the door is closed the light,fan and turntable go off all other functions work correctly. Read more