Sf30202kq2 Parts

This small anchor tip is a plastic mounting retainer designed to secure a component in place on compatible Whirlpool appliances. It provides a simple, low-profile hold so panels or wiring stay seated and aligned during normal use. What it does:

• Acts as a push-in retainer to hold a panel, trim piece, or small harness securely
• Keeps parts aligned to prevent rubbing, vibration noise, or loose panels
• Helps maintain proper fit between joined components after reassembly
• Commonly replaced when the original clip is worn, cracked, or broken

• One anchor tip mounting retainer

• Remove power and unplug the appliance before beginning any repair
• Typically installs by pushing into a pre-drilled hole until it snaps into place; may require a small flat tool for removal
• Inspect surrounding holes and mating parts; replace any damaged clips to ensure a secure fit

Color: White. Size: 8-18 x 3/8 inch.

This replacement screw secures appliance panels and components to keep parts aligned and stable. Use it to replace missing or damaged fasteners that cause loose trim, rattling, or unsecured panels for safer, quieter operation. What it does:

• Fastens panels, brackets, trim pieces, or small components in place
• Restores proper alignment and stops vibration or rattling caused by loose hardware
• Replaces stripped, corroded, or missing screws to prevent parts from shifting or falling
• Compatible where the OEM lists part W11244557 as the required fastener

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening, which can strip threads or crack parts
• Replace like-for-like; length before installing

This replacement burner knob restores reliable control of a stove or range burner, letting you adjust heat and operate the burner safely. It's a direct-fit control knob designed to replace a damaged, missing, or worn knob. What it does

• Replaces a cracked, stripped, or missing burner control knob so the control shaft can be turned and temperature/power can be adjusted.
• Helps restore proper grip and alignment on the control shaft to prevent slipping or loss of control.
• Addresses symptoms like a loose or wobbly knob, knob that won't engage the shaft, or difficulty setting burner heat.
• Works with the original control valve/switch — does not replace internal valves or switches.

• One replacement burner knob

• Disconnect power to the appliance (and shut off gas for gas ranges) before servicing.
• Pull the old knob straight off the control shaft (use a cloth and firm, even pull if needed); align splines and press the new knob onto the shaft until fully seated.
• Do not use excessive force or tools directly on the knob; protect finishes with a cloth if using pliers.
• Replace the damaged component before installing the knob.

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

Bottle with brush. Color: Harvest Gold. It's 0.6 fluid ounces.

This oven igniter switch controls the spark ignition for a gas oven, allowing the burner to light reliably so the oven can heat. It replaces a worn or failed switch to restore safe ignition operation. What it does:

• Sends spark signal to the bake/oven burner igniter to initiate ignition
• Commonly replaces a switch that causes no spark, intermittent ignition, or clicking without lighting
• Works as part of the oven's ignition system to help ensure consistent burner lighting
• Matches OEM function and mounting for direct replacement

• One oven igniter switch as pictured

• Disconnect power and gas supply before starting any repair
• Basic mechanical skill and common hand tools are typically required;
• Do not force connectors; ensure proper grounding and secure connections before testing

This is a direct-replacement electric surface burner used on the cooktop to provide a heating element for pots and pans. It restores a single cook zone so you can cook evenly and regain full cooktop function. What it does:

• Replaces a damaged or non-heating cooktop surface burner element
• Conducts electricity to produce heat for cookware on the cooktop
• Commonly used when a burner won't heat, cycles irregularly, or shows visible damage
• Fits into the cooktop receptacle and connects to the surface element terminal block

• One standard electric surface burner element

• Disconnect power to the range at the breaker before servicing to avoid shock
• Remove the cooktop grate/trim and lift the element out of its receptacle to replace
• Inspect terminals and receptacle for damage; replace any damaged connectors

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

Rubber bumper. Color: Grey.

Bottle with brush. Color: New avocado. Size: 0.6 fl.oz.

This burner knob is the user control for turning range or cooktop burners on and off and adjusting flame/heat settings. It restores safe, tactile control when original knobs are worn, cracked, or missing. What it does:

• Provides a grip surface and interface to rotate the valve or switch for burner heat selection
• Replaces worn, stripped, or damaged knobs that prevent smooth rotation or accurate setting
• Helps stop accidental heat changes caused by loose or broken controls
• Fits on standard splined valve stems used on many Whirlpool ranges and cooktops

• Disconnect power to the appliance and shut off gas before servicing
• Pull off the old knob straight from the valve stem; align splines and push the new knob onto the stem until fully seated
• Do not force the knob; if it does not slide on easily, verify correct orientation and spline match