Sgv55m43eu/10 Parts

This spring counterbalances the dishwasher door so it opens smoothly and doesn't drop. Replacing a worn or broken hinge spring restores proper door tension and controlled movement to protect the hinges and front panel.

• Provides tension through the door hinge/cable system to balance the door weight
• Enables smooth, controlled opening and closing
• Symptoms of failure: door drops quickly, feels heavy, or won't hold a partially open position

• Disconnect power and turn off water before servicing
• Support the door; use eye and hand protection—springs are under tension
• Note spring hook locations and routing before removal; transfer to the same positions
• After replacement, check door balance and operation; replace both springs if tension is uneven side-to-side

This small insert is a precision-fit piece that helps secure and align a mating component so it fits and functions properly. Replacing a worn or missing insert restores a solid connection and dependable operation. What it does:

• Provides a snug mounting/locating point for the related part
• Helps prevent looseness, rattling, or misalignment
• Restores proper fit after cracking, wear, or loss
• Common signs include a cracked or missing insert and parts that no longer stay in place

• 1 insert

• Disconnect power (and water supply, if applicable) before servicing
• Compare the new insert to your original to match and orientation
• Remove any broken fragments and clean the area before installation
• Press or snap into place carefully; do not force or overtighten any fasteners

This mounting set secures the appliance to surrounding cabinetry for stable, level operation and correct door alignment. It replaces worn or missing mounting brackets and hardware to restore a snug, reliable fit. What it does:

• Provides the brackets and mounting hardware used to fasten the appliance to the cabinet or surrounding frame
• Helps maintain proper alignment and prevents movement, vibration, or sagging during use
• Addresses symptoms like a loose or shifting appliance, misaligned door, or uneven installation
• Restores the original mounting points so panels and trim sit flush

• Always disconnect power and water before beginning work
• Follow the manufacturer's installation diagram and torque recommendations for fasteners
• Use common hand tools (screwdriver, socket) and a second person for positioning larger appliances
• Check alignment and level after installation; do not overtighten fasteners which may strip threads or deform brackets

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This water distributor directs rinse and wash water to the dishwasher spray arms for even cleaning and circulation. Replacing a faulty distributor restores proper water routing and helps recover normal wash performance. What it does

• Channels wash and rinse water to the spray arms and wash assembly
• Ensures correct water flow timing during wash cycles
• Commonly replaced when spray arms fail to spin or performance drops
• Can cause poor cleaning or uneven spraying if cracked, clogged, or leaking

• Disconnect power and shut off the water supply before starting
• Access typically requires removing the dishwasher base panel or lower access panel
• Handle clips and seals carefully; replace any damaged gaskets to avoid leaks
• Test for leaks and proper spray-arm operation after reassembly

This crockery basket is an upper-rack insert that keeps plates, bowls and small dishware separated for better cleaning coverage and organized drying. It fits into the dishwasher's top rack to hold fragile or oddly shaped items securely. What it does:

• Holds plates, bowls and small dishware upright to reduce movement during the wash cycle
• Helps improve water and detergent access for better cleaning of individual items
• Prevents dish-to-dish contact to reduce chipping and breakage
• Provides organized storage for small items that don't sit well in standard rack tines

• No tools required in most installs; simply place the basket into the upper rack at the intended position
• Handle with care to avoid bending tines; inspect for cracks or damage before installing
• Disconnect power and disable the dishwasher cycle before adjusting racks or installing parts

This push button set replaces the worn or damaged control buttons on compatible Bosch appliance control panels, restoring tactile feedback and reliable user input for cycle selection and control functions. What it does:

• Replaces broken, cracked, or missing push buttons that prevent normal panel operation
• Restores proper tactile feel for selecting cycles, options, and other controls
• Helps eliminate buttons that stick, don't depress fully, or fail to register presses
• Improves appearance of the control panel when original buttons are faded or discolored

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Typically installs from the front of the control panel; may require removing the outer panel or trim
• Handle buttons gently—do not force; align clips or posts before pressing into place

This replacement rail restores smooth, supported movement of a dishwasher rack so loading and unloading work as intended. It replaces a worn, cracked, or bent rail to stop sagging and improve rack alignment. What it does:

• Guides the dishwasher rack along its track for consistent in-and-out motion
• Supports rack weight to prevent tipping or sagging when extended
• Replaces damaged, cracked, or worn rails that cause noisy or jerky operation
• Helps restore proper rack alignment and engagement with the rollers

• Disconnect power and turn off water supply before beginning any repair.
• Remove the affected rack to access and replace the rail; keep small clips or fasteners for reassembly.
• Inspect rack rollers and mounting clips; replace any damaged components for best performance.

This bottom case is the dishwasher base assembly that protects internal components and helps contain leaks, keeping the wash system stable and secure. It's a direct-fit replacement that restores the appliance's lower enclosure. What it does

• Forms the appliance's lower enclosure to shield the pump, motor and wiring from debris
• Helps direct and contain water in the event of minor leaks to protect surrounding components
• Provides mounting surfaces for lower hardware and supports correct alignment of internal parts
• Can reduce rattles or vibration caused by a damaged or cracked lower shell

• One bottom case

• Disconnect power and water supply before beginning any repair
• Handle the part carefully to avoid damaging edges, clips or mounting tabs
• Keep fasteners and any hardware from the original unit; verify fit and alignment before tightening
• If you see water or corrosion, dry and inspect surrounding components for damage before reassembly

This insert is a small trim/cover piece that restores the finished appearance and protects internal edges where fitted. Replacing a damaged or missing insert helps prevent debris buildup and keeps the appliance looking and functioning as intended. What it does

• Covers exposed openings or edges to provide a finished appearance
• Protects internal components from debris and accidental contact
• Stops rattling or movement caused by a cracked or loose insert
• Helps maintain proper alignment of adjacent trim or panels

• One insert as shown

• Typically installs with snap-fit tabs or screws; align and press or fasten securely
• If part is behind a panel, remove the outer panel before installing
• Disconnect power before accessing areas with electrical components or heating elements
• Use only manufacturer-recommended fasteners; replace any broken clips to ensure secure fit

This replacement door switch completes the appliance's door-sensing circuit so the unit only runs when the door is closed. It restores proper door-detection and helps the appliance start and stop reliably. What it does

• Detects door open/closed state and completes the electrical circuit when closed
• Prevents the appliance from running with the door open
• Can resolve symptoms like controls not responding, cycle not starting, or the unit stopping unexpectedly when the door is closed
• Works as the direct electrical interface between the door/latch and the control system

• One switch

• Disconnect power before servicing to avoid electrical shock
• Access may require removing the control panel or door trim depending on model
• Handle wiring and connectors carefully; match wire locations before removal

A replacement trim strip that restores the appliance's finished edge and helps stop rubbing or catching along doors and panels. Replaces a worn, bent, or missing trim piece to improve appearance and panel fit. What it does:

• Covers and protects a panel edge or seam to prevent rubbing and cosmetic damage
• Reduces rattling or catching caused by a missing or damaged trim piece
• Restores a smooth finished look to doors, drawers, or control panels
• Works as the OEM-specified replacement strip for compatible appliance panels

• One replacement trim strip

• Disconnect power to the appliance and remove panels per the manufacturer's service instructions before installing
• Trim may snap, slide, or clip into place; avoid forcing parts to prevent damage
• Use proper tools and protect adjacent surfaces during removal/installation

This replacement frame restores the appliance's front cabinet trim for a clean, finished appearance and helps secure the control panel and door assembly. It's a direct-fit exterior trim piece designed to return proper alignment and protection. What it does

• Provides structural support and alignment for the front panel and control area
• Covers and protects internal edges from dirt, moisture, and impact
• Helps stop rattling or vibration caused by a warped or damaged trim
• Common symptom: visible damage, cracks, loose or misaligned front trim

• Remove power to the appliance before starting work to avoid electrical shock
• Small hand tools typically required; follow OEM disassembly sequence for access
• Handle trim carefully to avoid scratches; use a soft surface to rest parts
• If clips or screws appear damaged, replace them separately.

A replacement cutlery basket that holds forks, knives and spoons securely in your dishwasher lower rack to keep small items organized and prevent movement during wash cycles. Restores proper utensil separation for better cleaning. What it does:

• Provides divided compartments to keep silverware separated and upright
• Prevents small items from falling to the bottom of the tub or blocking the spray arm
• Helps maintain consistent water flow around utensils for improved wash performance
• Fits into the lower rack to organize and contain loose cutlery during cycles

• Drops into the dishwasher lower rack—no tools required for standard installs
• Ensure basket seats securely and does not obstruct rack fold-down tines or spray arms
• Remove power or follow appliance manufacturer safety guidance before performing any checks
• Inspect for cracks or broken clips before reuse; replace if damaged