She53tl5uc/02 Parts

This repair kit restores the pump sump area on compatible Bosch dishwashers, helping stop leaks and restore proper water flow. Use it to replace worn sump components without replacing the entire pump assembly. What it does:

• Replaces worn pump-sump components that can cause leaks or allow water to pool in the dishwasher sump.
• Restores sealing and impeller engagement to help the drain and circulation pumps move water effectively.
• Can stop symptoms like water remaining in the tub, unusual pump noise, or visible leaks around the sump area.

• Disconnect power and water supply before starting any repair.
• Inspect removed parts and mating surfaces for damage; replace the full pump assembly if housings are cracked.
• Follow manufacturer instructions for proper seal and impeller seating; test for leaks and correct operation after reassembly.

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This dishwasher crockery basket holds and organizes flatware and small items during the wash cycle. Replacing a damaged basket helps keep pieces upright, prevents items from slipping through, and supports consistent cleaning results.

• Organizes and separates silverware so wash spray reaches all surfaces
• Helps keep small items from falling into the tub, sump, or spray arm area
• Restores stable storage when the original basket is cracked, warped, or missing
• Common symptoms: broken grid walls, missing sections, sharp edges, or utensils tipping over

• Turn the dishwasher off and allow any hot surfaces to cool before reaching inside
• Lift out the old basket from the lower rack and set the new basket in the same location or hooks
• Ensure the lower spray arm spins freely with the basket in place
• Load utensils per your owner's manual to avoid blocking spray or causing damage

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This power cord provides the appliance's main electrical connection, restoring reliable power when the original cord is damaged or failing. It replaces worn or frayed cords so the appliance can receive safe, consistent power. What it does:

• Carries mains electricity from the outlet to the appliance so controls and motors can run
• Replaces cords with visible damage, fraying, or exposed conductors
• Fixes symptoms like the appliance not powering on or losing power intermittently
• Prevents unsafe operation from a compromised cord that could cause arcing or overheating

• Always disconnect the appliance from power at the breaker or unplug before starting work
• Inspect strain relief and terminal connections; secure wires under terminals and tighten to spec
• Do not cut or splice the cord; replace with the correct, intact cord to maintain safety

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

These push buttons replace worn, broken, or missing control-panel buttons so your appliance's front controls respond correctly and look finished. They restore tactile feedback and allow reliable program selection. What it does:

• Replaces cracked, stuck, or missing push buttons on the control panel
• Restores proper tactile feedback so selections register consistently
• Helps resolve symptoms like unresponsive panel buttons or intermittently working controls
• Matches OEM shape and fit for easy alignment on the control board

• One push button set as shown

• Disconnect power to the appliance before starting any repair to avoid shock
• Remove the control panel trim or console to access button locations
• Handle small plastic buttons carefully to avoid snapping tabs during removal/installation
• If the control membrane or switch beneath the buttons is damaged, replace both parts for reliable operation