She56c060c/48 Parts

This replacement power cord restores mains power to compatible Bosch appliances, providing a safe, OEM-style connection so your appliance can turn on and run reliably. Use when the original cord is damaged or not supplying power. What it does

• Supplies electrical power from the wall outlet to the appliance for normal operation.
• Replaces frayed, cut, or melted cords that can cause intermittent power or no power.
• Helps eliminate loose connections that can cause arcing, flickering, or tripped breakers.
• Restores a secure, strain-relieved connection where the cord meets the appliance chassis.

• Always disconnect power at the breaker or unplug the appliance before beginning service.
• Follow the appliance wiring diagram and secure all terminal connections per the manufacturer instructions.
• Route the cord through strain reliefs and grommets to prevent chafing; use supplied or OEM fasteners if present.

This holder secures a small appliance component in place to prevent movement and reduce noise and wear. It restores proper fit and helps keep connected lines and parts aligned for reliable operation. What it does

• Secures a hose, wire, or small assembly to the appliance frame to prevent rubbing or sagging
• Keeps components aligned to reduce vibration and rattling noises
• Helps maintain proper routing to avoid strain on connections
• Commonly replaced when loose, broken, or missing and causing movement or noise

• One holder

• Turn off power and, if applicable, water supply before starting work
• Inspect surrounding clips and fasteners; replace if damaged
• Install in the same orientation as the original; use proper fasteners if required

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

Restore a secure, comfortable grip on your appliance door. This replacement door handle refreshes the look of your unit and makes everyday opening and closing smooth, safe, and dependable. What it does

• Provides a sturdy handhold to open and close the door
• Replaces cracked, broken, loose, or missing handles
• Helps prevent stress on door trim from pulling without a handle
• Refreshes worn or scuffed exterior appearance

• 1 door handle

• Disconnect power and allow the appliance to cool before servicing
• Open the door and support it to avoid strain while removing the old handle
• Remove screws/fasteners, position the new handle, and tighten evenly; avoid overtightening
• Reuse existing mounting hardware if required and verify smooth door operation after installation

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This is a replacement push button set for the control panel. It restores smooth, reliable button action so you can select settings without sticking or broken caps, keeping operation intuitive and the fascia looking clean.

• Replaces worn, cracked, or missing push button caps on the control interface
• Transfers your press to the underlying switch bank for proper function selection
• Helps resolve buttons that stick, wobble, or don't spring back
• Refreshes the appearance of the control panel

• Disconnect power to the appliance before servicing
• Remove or open the control panel to access the button set
• Note the position and orientation of each button; transfer components in the same order
• Before final reassembly, test each button for smooth travel and proper actuation

This replacement control panel push button restores a worn, cracked, or missing selector button so your appliance's controls work and look like new. Designed to match the original fit and feel for easy operation. What it does

• Replaces a damaged, broken, or missing push button on the control/display panel
• Restores proper tactile feedback for selecting cycles or settings
• Helps resolve issues where a button won't depress or sticks intermittently
• Visible cosmetic repair for scratched or faded buttons

• One control panel push button

• Disconnect power to the appliance before starting any work
• Access typically requires removing the control panel or overlay—keep track of fasteners
• Handle small trim pieces carefully to avoid damaging clips or the surrounding bezel

This outer door is the dishwasher's front exterior panel that restores the unit's finished appearance and protects internal components from damage. Replacing a damaged door helps maintain proper door alignment and exterior protection. What it does:

• Serves as the dishwasher's front exterior panel and cosmetic cover.
• Protects inner door components, insulation, and wiring from impacts and moisture.
• Supports the door latch and helps keep the door aligned for proper closing.
• Replace if the door is dented, cracked, rusted, or causing poor fit or visible damage.

• Disconnect power and water supply before starting any repair.
• Door panels can be heavy or awkward—use a second person to lift and align.
• Handle edges carefully; trim or glass may be sharp.
• Transfer hinges, latch, insulation, and trim as required.

This spring-style hose clamp secures flexible appliance hoses to fittings, helping prevent leaks and loose connections. It's a small but critical fastener that keeps water and drain hoses sealed under normal operation. What it does:

• Holds a rubber or plastic hose firmly onto a barb or spigot to stop leaks
• Prevents hose slippage that can cause water pooling or drip symptoms
• Maintains a compressive seal that resists vibration and thermal cycling
• Commonly used on drain, fill, and circulation hoses in dishwashers and washers

• Disconnect power and shut off water supply before starting work
• Use appropriate pliers (hose clamp or needle-nose) to expand and position the clamp
• Ensure the clamp sits evenly over the hose barb and releases fully to secure the hose
• Inspect the hose and connection for damage; replace hoses if they are cracked or excessively worn

This replacement door frame restores the inner trim that supports the dishwasher door panel and seals the front edge. It helps maintain proper door alignment and provides a finished appearance to the appliance front. What it does:

• Replaces damaged or warped inner door trim that can affect door fit and closure
• Helps keep the door panel properly aligned for consistent latch engagement
• Prevents gaps that can trap moisture or debris along the door edge
• Restores the OEM appearance of the dishwasher front

• Disconnect power and water supply before beginning any repairs
• Remove the outer door panel carefully to access and replace the inner trim; keep fasteners organized
• Inspect door seals and latch components while installing; replace if worn

This facia panel is the exterior trim that covers a dishwasher's control console, restoring the appliance's appearance and protecting the underlying buttons and electronics from moisture and wear. It's a direct-replacement cosmetic and protective panel. What it does:

• Covers and protects the control console and electronic components from spills and moisture.
• Restores a damaged, cracked, or scratched front appearance for a cleaner finish.
• Keeps button and touchpad openings aligned for reliable user access.
• Helps prevent debris buildup behind the control area that can cause malfunctions.

• Disconnect power to the appliance before beginning any repair.
• Remove the outer door or control assembly per the appliance service instructions to access mounting screws or clips.
• Handle edges carefully to avoid scratching the replacement panel and to prevent cuts from metal edges.
• Reuse or replace any mounting screws/clips as needed; do not force panels into place.