She763ar72uc/22 Parts

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

The Outer Door is an OEM part for Bosch dishwashers. It serves as the protective outer layer of your dishwasher, providing a clean and polished appearance while also ensuring the safety of the internal components.

A bad outer door can occur due to wear and tear over time, accidental damage, or exposure to harsh cleaning agents. Signs of a faulty door include dents, scratches, or a loose fit that compromises the overall aesthetics and functionality of your dishwasher.

Symptoms of a bad outer door include:

• Visible dents, scratches, or damage
• Door not closing correctly

Replace your damaged or worn-out outer door with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This water softener assembly conditions incoming dishwasher water to reduce mineral buildup and improve wash performance. It helps prevent hard-water spots and cloudy glassware for clearer, cleaner results. What it does:

• Removes or binds hardness minerals from incoming water to reduce limescale and spotting
• Helps maintain detergent effectiveness for better cleaning and rinsing
• Reduces mineral buildup inside the wash system and on dishes and glassware
• Supports consistent wash performance in areas with hard water

• One water softener assembly

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any seals or gaskets if damaged; use manufacturer-recommended parts
• Handle the unit carefully to avoid damage to connectors or mounting features
• Refer to the dishwasher service manual or OEM installation instructions for exact placement and wiring

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This cable harness routes power and control signals between the appliance's control and its components. Replacing a damaged harness restores solid electrical connections so the unit starts, runs, and completes cycles without intermittent failures or non-working functions. What it does:

• Distributes electrical power and control signals between boards, motors, valves, and sensors
• Replaces wiring that is burnt, brittle, frayed, or corroded
• Helps resolve symptoms like won't start, intermittent operation, inoperative features, or error/fault indications related to open/shorted circuits
• Restores safe, reliable connectivity to prevent further electrical damage

• 1 cable harness assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Photograph/label connections and routing to match the original layout
• Seat connectors fully by the housings; do not pull on wires
• Route and secure away from sharp edges, moving parts, and hot surfaces to avoid chafing or heat damage

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic