Shem78z55n Parts

This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.

• Provides the structural interior panel of the door
• Mounts the detergent dispenser, latch, and vent components
• Works with the door gasket to contain water and steam
• Typical symptoms include dents/rust, leaks at the door area, or a loose/misaligned dispenser or latch

• Disconnect electrical power and turn off the water supply before starting
• Open the door, support the outer panel, and remove perimeter screws to separate the door halves
• Transfer the dispenser, latch/lock, vent, wiring, and insulation from the old panel to the new one; reuse hardware and seals if in good condition
• Ensure the door gasket seats evenly; after reassembly, run a short test cycle and check for leaks

The Outer Door is an OEM part for Bosch dishwashers. Composed of durable stainless steel, it withstands cleaning chemicals while protecting the internal components. 

Symptoms of a bad outer door include:

• Dents, scratches, or rusting affecting the appearance   
• Leaks or moisture ingress from a compromised seal
• Looseness, sagging, or improper alignment
• Broken or missing handle/latch components

Causes of failure could include normal wear over time from daily use. Accidental dents from cookware or impact damage could also affect performance. 

Replacing with this OEM Bosch outer door restores protective function. Compatible with 300/500 freestanding and built-in models, its premium materials meet quality standards. This OEM Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Crockery Basket is an OEM replacement part designed specifically for Bosch dishwashers. It provides adjustable levels for washing different sized items like plates, cups, and saucers. Causes of a bad crockery basket include damage over time from heavy use or impact. 

Symptoms of a bad crockery basket include:

• broken or cracked racks
• difficulty keeping dishes properly spaced during the wash cycle
• racks that no longer latch securely into place 

This genuine OEM Bosch crockery basket ensures your dishes are washed efficiently and gently. This Bosch part can also be used on Thermador and Gaggenau appliances.

This door seal fits into the dishwasher's tub channel around the door opening. It compresses when the door closes to contain wash water and steam, helping prevent front-door leaks and maintain quiet, efficient operation. What it does:

• Creates a watertight seal between the dishwasher door and tub during cycles
• Helps keep water and steam from escaping; reduces operational noise
• Wear may show as drips at the door, moisture on the floor, or visible cracks/flattening
• Contributes to the door not sealing evenly

• 1 door seal

• Disconnect power and turn off the water supply before service
• Open the door, pull the old seal straight out of the channel, and clean the groove
• Warm and straighten the new seal; start at the top center and press evenly into the channel without stretching
• Close the door to help seat the seal and check for leaks on the next cycle

The Holder is an OEM component specifically designed for Bosch dishwashers. It secures serveware and accessories safely inside the tub during wash cycles. Flexible yet durable prongs provide adjustable containment for maximum loading efficiency.

Causes of a bad holder can include normal wear and tear until prongs warp or weaken, inhibiting proper holding. Damage from loading large pots may also cause replacement needs.

Symptoms of a bad holder include:

• Serveware that shifts or falls during washing, resulting in noisy cycles  
• Containment prongs that are loose, misshapen, or cracked from use
• Reduced loading capacity

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours to optimize organization and minimize breakage during every wash.
 

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

This door latch interlock secures the appliance door and signals the control when it's safely closed, allowing cycles to start and run without interruption. Replacing a worn latch restores reliable starts and proper safety interlock function.

• Locks the door closed during operation to prevent interruptions
• Sends a "door closed" signal to the control so a cycle can start
• May resolve issues like failure to start or stopping when the door is bumped
• Helpful when the door won't click shut or shows a "door open" alert

• Disconnect electrical power at the breaker before servicing
• Open the door and remove the inner-door screws to access the latch area
• Move connectors one at a time to the new latch; ensure each is fully seated
• Reassemble, verify the strike aligns for a positive "click," and run a short test cycle

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

The Terminal Block is an OEM part for Bosch dishwashers. It serves as the connection point where the household electrical power supply is connected to the dishwasher's internal wiring harness.

Causes of a malfunctioning Terminal Block can include loose connections allowing arcing or short circuits, corrosion buildup due to moisture exposure, or physical damage from impact.  

Symptoms of a bad Terminal Block include:

• No power to the dishwasher at all
• Intermittent power issues or the dishwasher unexpectedly losing power
• Signs of overheating, burning or arcing around the terminal block area

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Strip is an OEM part for Bosch dishwashers. It serves as a protective and decorative element, enhancing the appearance of your dishwasher while providing a clean and finished look to the tub area. The trim strip is designed to fit along the edges of the dishwasher tub, covering any visible gaps. 

A bad strip can occur due to wear and tear, accidental damage, or exposure to moisture. Signs of a faulty trim strip include visible cracks, breaks, or misalignment.

Symptoms of a bad strip include:

• Visible cracks, breaks, or misalignment 
• Discoloration or fading
• A loose or ill-fitting strip

Replace your damaged or worn-out strip with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Rail-Pull Out is an OEM part for Bosch dishwashers. It is responsible for smoothly gliding the dishrack in and out of the dishwasher for easy loading and unloading of dishes. 

Causes of a bad dishrack rail can include normal wear and tear from repeated use, damage from overloaded or unbalanced dishracks, or bent or damaged rails that no longer function properly. 

Symptoms of a bad dishrack rail include:

• The dishrack not sliding smoothly in and out 
• Issues fully extending or retracting the dishrack
• Noise or grinding sounds when operated
• Difficulty loading and removing dishes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. 

This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.

• Secures the toe-kick or lower access panel to the base/frame
• Restores proper fit when the original screw is lost or damaged
• Helps reduce panel rattles and vibration
• Maintains correct alignment and clearance at the bottom edge

• Disconnect power before servicing; also shut off the water supply
• Support the panel and align holes before threading the screw
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Verify size matches the original; replace matching hardware together if required by your model

The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.

Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.

Symptoms of a bad cover include:

• Cracks, holes or other physical damage
• Warping or deformation over time
• Loose or improper fit that exposes internal parts

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This bottom case is the lower housing shell for the unit. It forms the base that supports internal components and exterior panels. Replacing a cracked or damaged case restores structural integrity, stability, and proper fit.

• Forms the appliance's lower housing/base and supports internal assemblies
• Provides mounting points for screws, feet, and covers
• Helps protect wiring and components from impact or abrasion
• Common signs of failure: cracked or warped housing, broken tabs/bosses, wobbling base, panels that won't seat correctly

• Disconnect power before servicing; allow the unit to cool
• Remove lower screws/fasteners and carefully separate the housing
• Transfer any feet, inserts, or strain reliefs from the old case to the new one
• Route wiring carefully and avoid pinching before reinstalling fasteners and testing

This is the insert for the dishwasher silverware/utensil basket. It helps separate and support flatware so pieces stay upright and spaced for proper spray coverage, replacing a cracked or missing insert to restore normal loading and cleaning. What it does:

• Fits into the utensil basket to separate forks, spoons, and knives
• Helps prevent nesting and keeps small items from slipping through
• Holds flatware upright to maintain consistent spray reach
• Typical symptoms: broken or missing sections, warped piece, utensils tipping or sliding out

• 1 insert

• Make sure the dishwasher is off and cool before working inside
• Remove the lower rack and silverware basket if needed for access
• Align the insert with the basket openings and press it fully into place
• Verify it sits flat and does not interfere with rack movement

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping