Shp878wd5n/11 Parts

The dishwasher insulation is an OEM component specifically designed for Bosch dishwashers. Installed between the dishwasher tub and outer door panel, this insulation serves a crucial purpose. 

Symptoms of a bad dishwasher insulation include:

• Loss of insulating properties allowing heat transfer between interior and exterior surfaces 
• Damage, cracks or breaks that compromise its insulating barrier
• Looseness, misalignment or complete absence from its designated position

Over time, insulation can deteriorate due to normal wear and environmental exposure. Without proper insulation, energy efficiency suffers along with wash and dry performance. 

This Bosch OEM replacement part is compatible with Thermador, Gaggenau, and some Kenmore models.

Keep your appliance running as designed with this genuine replacement part. It's engineered for an exact fit to restore proper operation when the original component is worn, damaged, or faulty.

• Replaces a failed original component to restore intended function
• Can help address issues such as poor performance, intermittent operation, unusual noises, or error codes
• Built to match the original fit and connection points on compatible models
• Durable, factory-specified component for reliable service

• Disconnect power (and shut off water or gas if applicable) before servicing
• Use appropriate hand tools and protective gloves
• Follow your model's service manual; note wire/part locations before removal
• Verify correct operation before reassembling covers and panels

This fine filter sits in the dishwasher's sump filter system. It screens out small food particles so wash water stays cleaner, helping prevent debris from recirculating onto dishes and protecting internal wash components for consistent cleaning performance. What it does:

• Traps fine debris before it recirculates through the spray system
• Helps maintain water clarity for more consistent cleaning results
• Worn, torn, or warped mesh can lead to gritty residue, particles on dishes, or odors
• Replace if the filter is damaged, missing, or will not lock in place

• 1 fine filter

• Power off the dishwasher, open the door, and remove the lower rack
• Turn the filter assembly counterclockwise to unlock and lift it out
• Separate the fine filter and install the new one
• Reinstall and lock the assembly clockwise until fully seated; do not force

The Hinge Plate Assembly is an OEM replacement part for Bosch dishwashers. This assembly consists of the outer hinge bracket and internal mounting plate that together secure the dishwasher door. 

Causes of a bad assembly tend to be repetitive stress from normal usage, as well as potential damage from forced or improper door openings/closings over time. 

Symptoms include: 

• Loosening or sagging of the door during wash cycles  
• Difficulty smoothly operating or securing the door
• Alignment problems affecting seals or balanced movement

This OEM Bosch replacement part is also compatible with Siemens, Thermador, and some LG dishwasher models. 

The Outer Door Panel is an OEM part for Bosch dishwashers. It serves as the exterior cover of the dishwasher door, providing protection and contributing to the appliance's overall aesthetic.  Note: Outer door only, the handle is sold separately.
Handle part number 12012913

Causes of a bad outer door panel can include accidental impacts, exposure to harsh cleaning chemicals, or wear and tear over time.  

Symptoms of a bad outer door panel include:

• Visible dents or scratches on the panel
• Rust or discoloration
• Loose or misaligned panel
• Difficulty in opening or closing the dishwasher door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Fan is an OEM part for Bosch brand dishwashers. It works within the wash chamber to circulate air and enable optimum drying performance during the dishwashing cycle.

Causes of a bad fan can include a buildup of debris or residue that causes the blades to become unbalanced and contribute to loud noises, failure of electronic components that control fan motor operation, or physical damage to fan blades from impact.  

Symptoms of a bad fan include: 

• Dishes not drying properly
• Loud scraping or grinding noises coming from inside the dishwasher
• The fan not spinning or rotating during the cycle 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
 

The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.

A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.

Symptoms of a bad sealing include:

• Water or moisture around the control panel
• Visible cracks or gaps in the sealing
• A loose or ill-fitting seal

Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Float Housing is an OEM part for Bosch dishwashers. It is the part that houses the float assembly, which is responsible for detecting the water level inside the dishwasher tub during operation.

Causes of a malfunctioning or damaged Float Housing can range from debris or mineral buildup preventing proper float movement, to cracks or breaks in the housing itself due to age, heat exposure, or impact.  

Symptoms of a bad Float Housing can include:

• Water leaks or flooding from the dishwasher
• The dishwasher not filling with water or overfilling
• Error codes related to water level sensing issues
• The float itself getting stuck or failing to move freely within the housing

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This kit replaces the sliding rails that support and guide the upper dishrack, restoring smooth, level movement so the rack doesn't bind, tip, or drop during loading and unloading.

• Guides the upper rack in and out along the tub sidewalls
• Helps correct a sticking, uneven, or hard-to-slide upper rack
• Can reduce issues like a sagging rack or difficulty engaging rack stops
• Wear from age, heavy loads, or corrosion can require replacement

• Disconnect power and shut off water before servicing
• Remove the upper rack and stops to access and swap the rails
• Transfer any hardware from the old rails
• Test rack travel and ensure stops are secure before restoring power

The Door Pulley Rope is an OEM part for Bosch dishwashers. It works with the door latch mechanism, allowing smooth opening and closing of the dishwasher door. 

Causes of a bad door pulley rope can include fraying or breakage due to repeated use over time. Exposure to heat and chemicals may also damage synthetic fibers prematurely. 

Symptoms of a bad dishwasher door pulley rope include:

• Difficulty latching or sealing the dishwasher door 
• Sliding or squeaking noises coming from the door 
• The door not sitting flush or properly aligned
• The door is unable to stay fully open for loading/unloading

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement handle restores a secure, comfortable grip for opening and closing your appliance. Use it to replace a worn, loose, cracked, or missing handle and bring back the original look and everyday usability. What it does:

• Provides the handhold needed to open and close the door, drawer, or panel
• Attaches to the appliance panel using model-specific fasteners
• Helps maintain proper alignment and a clean, finished appearance
• Common symptoms: loose or wobbly handle, cracks/breaks, missing handle, difficulty opening

• 1 handle

• Disconnect power at the breaker and, if applicable, shut off water before servicing
• Access and remove the mounting fasteners from the opposite side of the panel/door; support the handle while removing
• Transfer and reuse the original screws, spacers, and end caps as required by your model
• Tighten fasteners evenly and avoid overtightening; verify smooth operation after reassembly

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.

• Provides the structural interior panel of the door
• Mounts the detergent dispenser, latch, and vent components
• Works with the door gasket to contain water and steam
• Typical symptoms include dents/rust, leaks at the door area, or a loose/misaligned dispenser or latch

• Disconnect electrical power and turn off the water supply before starting
• Open the door, support the outer panel, and remove perimeter screws to separate the door halves
• Transfer the dispenser, latch/lock, vent, wiring, and insulation from the old panel to the new one; reuse hardware and seals if in good condition
• Ensure the door gasket seats evenly; after reassembly, run a short test cycle and check for leaks

The Holder is an OEM component specifically designed for Bosch dishwashers. It secures serveware and accessories safely inside the tub during wash cycles. Flexible yet durable prongs provide adjustable containment for maximum loading efficiency.

Causes of a bad holder can include normal wear and tear until prongs warp or weaken, inhibiting proper holding. Damage from loading large pots may also cause replacement needs.

Symptoms of a bad holder include:

• Serveware that shifts or falls during washing, resulting in noisy cycles  
• Containment prongs that are loose, misshapen, or cracked from use
• Reduced loading capacity

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours to optimize organization and minimize breakage during every wash.
 

The Control Module/Panel is an OEM part for Bosch dishwashers. As the central command hub, it processes user inputs to seamlessly operate all washing and drying functions. Neatly housed behind the control interface, the control module utilizes circuitry and programming to direct cycle commands.

Causes of a bad control module/panel can include failures of internal electronic components over extended use. Repeated exposure to moisture and detergents may degrade circuit boards.

Symptoms of a bad control module/panel include:

• Non-responsive buttons or displays
• Inability to select cycles or options
• Failure to initiate water fill or temperature regulate
• Fault codes appearing unexpectedly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.