Shpm88z75n/20 Parts

The Dishwasher Installation Set is an OEM part for Bosch dishwashers. This set contains all necessary hardware for professional installation or replacement, including leveling legs, mounting brackets and anti-tip brackets. Manufactured from corrosion-resistant steel, these parts securely fasten the dishwasher into place.

Causes relate to normal wear over time from use. Improper original installation may also compromise individual parts. Failing to properly level, brace or anchor the dishwasher leads to unnecessary stresses.

Symptoms of worn or missing installation hardware include:

• Looseness, shaking or movement during operation
• Doors failing to properly self-close or seal fully
• Leaks developing around dishwasher connections
• Installation not compliant with current regulations

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This cover is a replacement protective housing piece that shields internal components and wiring from debris and moisture, helping maintain safe operation and component longevity. It restores the appliance's original enclosure where the panel is damaged or missing. What it does:

• Protects electrical parts and connectors from dust, water, and physical contact
• Helps prevent short circuits and arcing caused by exposed wiring
• Reduces vibration-related noise by securing adjacent components
• Restores proper fit and finish to the appliance exterior

• One replacement cover as shown

• Disconnect power (unplug or switch off breaker) before beginning any work
• Use basic hand tools; avoid overtightening fasteners or forcing clips
• Inspect surrounding seals and wiring while panel is removed; replace damaged parts as needed

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This cap is a small closure used to cover and protect an opening or fastener on the appliance. Replacing a damaged or missing cap restores a secure seal and a clean, factory-finished appearance.

• Closes an access port or cavity to keep out moisture and debris
• Helps maintain proper fit and appearance where the cap seats
• Replace if cracked, warped, missing, or won't stay secured
• Prevents rattles and exposed openings caused by a loose or broken cap

• Disconnect power and, if applicable, shut off water before beginning any repair
• Remove the old cap and clean the seating area
• Align tabs or threads and press or twist to secure—do not overtighten
• The cap sits flush and is firmly retained

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This insulating part is a molded insulation panel that reduces noise and limits heat transfer from the appliance during operation. It helps maintain normal operating temperatures and dampens vibration for quieter performance. What it does:

• Provides thermal barrier between the appliance cavity and exterior surfaces to reduce heat on surrounding cabinetry
• Dampens vibration and reduces operational noise
• Helps stabilize internal temperatures to support normal cycle performance

• Disconnect power (and water, if applicable) before servicing to avoid shock or injury
• Handle insulation carefully; avoid tearing or compressing beyond fitment
• Installation may require removal of outer panels or trim—refer to service manual for access steps
• If adhesive or clips are present, reuse OEM fasteners or replace with equivalent hardware

This insulating part provides protective thermal and electrical insulation for internal appliance components, helping keep wiring and nearby parts separated and shielded. Replacing a damaged insulator restores safe spacing and reduces heat-related wear. What it does:

• Provides thermal and electrical isolation between components to help prevent heat transfer and accidental contact
• Protects wiring and nearby parts from chafing and abrasion
• Helps reduce risk of shorts or intermittent electrical faults when insulation is intact
• Common symptoms of a bad or missing insulator: visible damage, melting or scorch marks, exposed wiring, or intermittent operation

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove any necessary panels to access the damaged insulator
• Handle carefully to avoid tearing or compressing the material; replace with the identical part number

This sealing gasket replaces a worn or damaged seal to restore a watertight connection and help prevent leaks. It's a direct-fit replacement designed to maintain proper sealing where the original gasket has failed. What it does:

• Creates a watertight seal at the intended joint to prevent water or air leaks
• Restores proper component fit and alignment when the old seal is cracked, compressed, or brittle
• Helps reduce symptoms like visible leaking, moisture buildup, or poor performance related to a failed seal
• Works with the original mating surfaces—replace damaged seals to avoid secondary damage

• One sealing gasket

• Inspect mating surfaces and clean thoroughly before installing the new seal
• Replace only with the matching part number to ensure correct fit; do not stretch or force the gasket into place
• Wear gloves and follow all appliance power/water isolation procedures before starting repairs

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This insulating part provides a thermal and electrical barrier to protect nearby components and wiring from heat and to help reduce vibration-related contact. It's a simple replacement that restores safe spacing and insulation. What it does:

• Acts as a heat shield to limit heat transfer to adjacent parts and wiring
• Provides electrical insulation to prevent shorting where components are close
• Helps reduce rattling by stabilizing/isolating panels or components
• Supports proper component spacing for safe operation

• Disconnect power to the appliance before starting any repair
• Replace only in the exact original location and orientation
• Handle gently to avoid tearing or compressing the material
• If mounting hardware is damaged or missing, replace hardware per OEM instructions

This replacement insert is a small interior mounting piece that helps secure and align appliance components for reliable operation and a finished appearance. It restores proper fit where worn, loose, or damaged inserts allow rattling or misalignment. What it does:

• Provides a stable mounting or seating surface for adjacent components
• Reduces movement, vibration, or rattling caused by a damaged insert
• Helps maintain proper alignment that supports normal operation of the assembly
• Can prevent further wear to surrounding trim or mounting points when replaced

• One insert

• High-level replacement; typically accessed from the appliance interior
• Use basic hand tools; avoid force that could break surrounding plastic or trim
• Disconnect power (and water for dishwashers) before servicing to reduce shock and injury risk

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation