Shs63vl5uc Parts

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

This base panel is the lower kickplate that covers the appliance's front base opening and gives the unit a finished appearance while protecting internal components. It restores the clean look and helps block debris from the cavity. What it does:

• Replaces a damaged, dented, or missing lower kickplate to restore appearance
• Covers and protects internal components at the appliance base from dust and spills
• Helps keep pests and larger debris out of the cavity under the appliance
• Contributes to proper airflow routing at the appliance front (where applicable)

• Designed to mount with the factory fasteners; retain original screws or clips when possible
• Lift or tilt the appliance as needed for access—follow manufacturer safety guidance
• Disconnect power before attempting service that requires moving or tilting the unit
• If fasteners are missing or damaged, replace with manufacturer-specified hardware

This cable supply is the factory replacement wire harness that delivers electrical power between components, restoring reliable connections and stable operation. Use it to replace damaged, frayed, or corroded supply wiring. What it does

• Provides the primary electrical connection between the appliance's power source and internal components.
• Restores continuity when the original cable is cut, burned, or shows visible wire damage.
• Helps stop intermittent power loss, control failures, or components that fail to start due to wiring faults.
• Maintains correct connector fit and routing to prevent shorting or chafing.

• One cable supply (wire harness) as shown.

• Always disconnect power (unplug appliance or switch off breaker) before inspecting or replacing wiring.
• Match connector shapes and wire colors to the original harness before installation; do not modify wires.
• Route the cable away from moving parts, sharp edges, and heat sources; secure with existing clips or fasteners.
• Clean or replace affected connectors to ensure a reliable connection.

The Panel-Facia is an OEM component specifically designed for Bosch dishwashers. As the decorative front enclosure, it protects internal electronics from accidental contact and preserves the stylish facade appearance.  

High-quality surface materials are selected to withstand moisture exposure without degrading. Slim integrated controls convey intuitive cycles without unnecessary buttons.

Causes for needing replacement usually involve visible cracking or damage. Direct impacts from falling pots could crack the protective face. Over time, normal wear may also lead to scratched or faded surfaces detracting from aesthetics.

Symptoms requiring a new panel-facia include:

• Loose fasteners allowing unwanted side-to-side movement  
• Gaps exposing internal electronics to potential liquid intrusion
• Scratched or cracked surfaces detracting from the appearance

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers utilizing consistent front designs. Reinstallation restores intended protection and preserves integrated control functionality.
 

The Power Module is an OEM part for Bosch dishwashers. It acts as the central control hub, using integrated circuitry and wiring to direct all electrical functions. Located discreetly within the control panel, the power module operates seamlessly behind the scenes.

Causes of a bad power module are usually failures in the printed circuit boards over time. Exposure to moisture, dust, or drops/impacts inside the dishwasher can cause circuitry to degrade.

Symptoms of a bad power module include:

• Displays or lights flashing or unresponsive
• Inability to start or progress through cycles
• No power transferring to wash motors or heating components
• Fault codes appearing

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Dishwasher Installation Set is an OEM part for Bosch dishwashers. This set contains all necessary hardware for professional installation or replacement, including leveling legs, mounting brackets and anti-tip brackets. Manufactured from corrosion-resistant steel, these parts securely fasten the dishwasher into place.

Causes relate to normal wear over time from use. Improper original installation may also compromise individual parts. Failing to properly level, brace or anchor the dishwasher leads to unnecessary stresses.

Symptoms of worn or missing installation hardware include:

• Looseness, shaking or movement during operation
• Doors failing to properly self-close or seal fully
• Leaks developing around dishwasher connections
• Installation not compliant with current regulations

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door pivot hinge secures and guides an appliance door so it opens and closes smoothly, helping maintain proper door alignment and sealing. It's a direct-fit replacement designed to restore stable door operation. What it does:

• Provides a pivot point to support the appliance door and maintain alignment
• Helps ensure the door closes fully to preserve internal temperature and performance
• Reduces door sag, rubbing, or misalignment that can cause uneven wear or gaps
• Can stop squeaks or binding caused by a worn or damaged hinge

• One hinge

• Disconnect power and empty the door area before starting; follow manufacturer safety instructions
• Support the door during removal and installation to prevent damage or injury
• Use existing fasteners unless replacements are specified by the manufacturer
• Tighten mounting hardware securely and check door alignment after installation

This outer door is the exterior front panel for the dishwasher. It restores the appliance's finished appearance and protects internal door components so the door closes and seals correctly. What it does:

• Replaces a dented, scratched, or corroded exterior door panel to restore appearance.
• Protects internal components such as the inner door, latch, and insulation from damage.
• Helps the door align and close properly; severe panel damage can cause closing or sealing issues.
• Provides the mounting surface for exterior trim, handles, and control bezels.

• Disconnect power and water to the appliance before beginning any repairs.
• Handle carefully — outer panels can be sharp or glass-backed; wear gloves and eye protection.
• Access typically requires removing door trim and the inner door; support the door during disassembly to avoid stress on hinges.

The Power Module Program is an OEM part for Bosch dishwashers. This module works to control and regulate power during each cycle.

It communicates with the control board to determine the appropriate settings for each cycle, including temperature, wash time, water levels, and more. The power module ensures all systems function properly according to the selected cycle.

Causes of a bad power module can include failures in its electronic components over time due to normal wear and tear. The module may also malfunction if exposed to excess moisture or temperature fluctuations.

Symptoms of a bad power module include:

• Inability to run cycles or switch between cycles
• Lights or displays not working
• Abnormal noises during operation
• Incomplete or ineffective cleaning and drying

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks