Shvm4ayb Parts

This lock clamp secures an appliance component or assembly so it stays properly seated during operation. Replacing a worn or missing clamp helps restore a stable, rattle-free fit and reliable performance. What it does:

• Holds mating parts together to prevent shifting or vibration
• Helps maintain correct alignment of the secured component
• Can resolve issues where a part won't stay attached or seated
• Restore normal operation when the original clamp is broken or missing

• One lock clamp

• Disconnect power (and shut off water/gas if applicable) before servicing
• Note the clamp's original orientation; take a photo to aid reassembly
• Seat the component fully, then engage the clamp securely without over-stressing it
• Reassemble and test for a firm, stable fit before returning the appliance to service

The Power Module is an OEM component specifically designed for Bosch dishwashers. As an integral electrical component, it safely distributes power to individual heating and motor control circuits. 

The power module works behind the scenes to reliably energize critical washing components. It enables optimal temperature control and wash activation sequencing.

Symptoms of a bad power module can include:

• Intermittent or inconsistent heating performance   
• Motors failing to operate as intended
• Safety cutoffs preventing cycle completion 

Causes include failures in capacitors, relays, or transformers due to environmental stresses and prolonged usage.

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models utilizing uniform electrical architectures. Replacement ensures power safety and consistent operation.
 

This temperature sensor (NTC) monitors wash temperature and reports it to the control so the cycle heats and advances correctly. Replacing a faulty sensor can restore proper cleaning performance and normal cycle times. What it does:

• Measures water temperature and sends resistance changes (NTC) to the control
• Helps the control regulate heating and cycle progression
• Failure symptoms can include no/insufficient heat, extended cycles, or poor drying
• May trigger a temperature-sensor fault (e.g., E11 on some models)

• 1 temperature sensor

• Disconnect power and turn off water supply before servicing
• Access is typically at the sump/heat-pump area; remove the toe-kick/lower panel as needed
• Expect some residual water; place a towel or tray to catch drips
• Ensure the sensor seats fully and the seal is in good condition to prevent leaks

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement spring restores proper tension in the specific mechanism it supports, helping the connected component operate smoothly. A worn or broken spring can cause weak action, poor latching, or parts that won't return or stay in position.

• Provides controlled tension/return force for moving parts per your model's design
• Helps doors, lids, latches, or dispenser mechanisms open/close or release reliably
• Symptoms of failure can include weak or uneven tension, components not staying shut/open, or sluggish operation
• Replace if the spring is stretched, broken, deformed, corroded, or missing

• Disconnect power and shut off water supply before servicing
• Note the spring's orientation and anchor points; take a photo for reference
• Use needle-nose pliers for removal/installation and avoid over-stretching
• If your model uses paired springs, replace both to maintain balanced tension

This repair set renews the hinge pivot components so the door opens smoothly and closes squarely. Replacing the worn hardware helps maintain proper alignment and a tight gasket seal for consistent performance. What it does:

• Replaces worn hinge pin/bushing hardware to restore door support
• Helps fix a door that sags, scrapes, or won't close flush
• Can reduce clicking, squeaking, or grinding at the hinge
• Helps the door seal make full contact to prevent warm air leaks

• 1 repair set

• Disconnect power; if applicable, turn off the water supply
• Remove items from the door; support the door and lift it off the hinge
• Install the new hinge hardware in the original orientation
• Reinstall and align the door; verify gasket seal and adjust leveling if needed

The Control Board is an OEM component specifically designed for Bosch dishwashers. As its central electronic control unit, the board regulates all cycle processes.

The control board relays user inputs to valve actuators, heaters, pumps, and other components. Precise coordination achieves top wash and rinse performance.

Causes of control board issues can include circuit degradation over thousands of cycles. Water intrusion may also cause short-circuiting.

Symptoms of a bad control board include:  

• The dishwasher failing to start or advance cycles
• Error codes/blinking lights indicating electrical faults  
• Inability to select or change cycles from the control panel

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers using similar technology. Replacement restores the intended operation.
 

This factory replacement spring restores the correct return force in the original mechanism so parts move, hold, and release as designed—bringing back smooth, reliable operation and preventing premature wear on related components.

• Provides controlled tension/return force within the intended assembly
• A weak, stretched, or broken spring can cause sticking, weak action, or failure to hold/release
• Replace if the original is deformed, missing, corroded, or broken
• Designed to fit and function like the original for consistent performance

• Disconnect power (and shut off water supply if applicable) before service
• Springs can release suddenly—use eye protection and needle-nose pliers
• Photograph the original routing/orientation before removal to match placement
• Access points and procedures vary by model; refer to the service manual

The Frame is an OEM part for Bosch dishwashers that provides support and organization for your cutlery, offering a designated space for your forks, knives, spoons, and other utensils. 

A bad frame can occur due to wear and tear, accidental damage, or exposure to harsh chemicals. Signs of a faulty frame include cracks, broken sections, or difficulty in smoothly sliding the drawer in and out.

Symptoms of a bad frame include:

• Cracks or broken sections in the frame 
• Difficulty in sliding the cutlery drawer in and out
• Unorganized or unstable storage of cutlery 

Replace your damaged or worn-out frame with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Wire Harness is an OEM part for Bosch dishwashers. It safely routes electrical signals between electronic control boards, switches, motors, and other components for proper function.

Causes of a bad wire harness can include short circuits due to moisture intrusion or physical damage over time such as cuts, kinks or exposed conductors from repetitive closing of the dishwasher door.

Symptoms of a bad wire harness include:

• Cycle or component malfunctions like improper washing or drying
• The control panel lighting or displays not responding
• Error codes displayed on controls
• Abnormal noises from internal motors or solenoids

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory screw secures select Bosch/BSH appliance components. Use it to replace a missing or damaged fastener so panels, brackets, or trim stay tight and rattle-free during operation.

• Tightens and holds appliance parts such as panels, brackets, or trim in place
• Helps correct issues like loose or vibrating panels caused by a missing/stripped screw
• Maintains proper fitment after service or disassembly
• Torx T20 drive head helps resist cam-out during tightening

• Unplug power and shut off any water supply before servicing
• Use a T20 Torx driver; hand-start to avoid cross-threading
• Do not overtighten—snug to manufacturer torque guidance if available
• Replace any additional missing or damaged fasteners for even clamping

This Bottom Case is the lower housing of the appliance. It forms the structural base that supports and protects internal components, helping restore proper alignment and stability when the original base is cracked, warped, or damaged.

• Provides the mounting base for key assemblies and exterior panels
• Helps protect internal parts from impact and debris
• Maintains chassis alignment to reduce vibration, rattling, or poor panel fit
• Replace if the original base is broken, warped, or otherwise compromised

• Disconnect power and, if applicable, shut off water before servicing
• Edges can be sharp; wear cut-resistant gloves and eye protection
• Access typically requires removing lower/outer panels; transfer any hardware or seals from the old base
• Before reassembly and testing

This replacement holder secures internal components in place to maintain proper alignment and reduce movement-related noise and wear. Use it when the original holder is cracked, deformed, or no longer holds parts firmly. What it does:

• Secures and supports internal assemblies to keep components correctly positioned.
• Reduces rattling, vibration and movement that can occur from loose parts.
• Replacing a worn or broken holder can prevent parts from shifting and causing intermittent operation.
• Use when the existing holder is visibly damaged, cracked, or fails to hold components tightly.

• Always disconnect power (and water, if applicable) before accessing the appliance.
• Remove surrounding panels, racks, or trim as needed for clear access.
• Reinstall using the original fasteners or clips; ensure correct orientation and secure fit without forcing parts.

This holder is the mounting piece that secures a specific component inside your appliance. Replacing a cracked or missing holder restores proper support and alignment so the assembly stays stable and works as designed.

• Secures and supports the designated part in place
• Maintains alignment to help prevent vibration or rubbing
• A damaged holder can lead to loose or misaligned components
• Common symptoms: cracked/broken plastic, missing tabs, or the part no longer staying clipped/anchored

• Disconnect power and shut off water/gas before servicing
• Refer to your model's parts diagram for exact location and orientation
• Reuse original screws/clips/seals if they are not supplied with the replacement
• Do not overtighten fasteners into plastic; hand-snug to avoid stripping

The Ventilation Duct is an OEM part for Bosch dishwashers. It is a molded plastic component situated at the top of the appliance that serves two critical functions.

The ventilation duct allows steam and vapors produced during washing and drying cycles to efficiently escape. The duct also serves as the channel through which hot air is directed during the drying phase to evaporate water from clean dishes. 

Causes of a failed ventilation duct can include cracks that compromise a tight seal, or blockages obstructing smooth flow.

Symptoms of a bad ventilation duct include:

• Puddles or standing water inside the dishwasher
• Dishes failing to fully dry at the end of cycles
• High humidity or moisture trapped inside the appliance
• Hot air not properly channeled through the drying passages

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Indicator Light is an OEM part for Bosch dishwashers. It serves as a visual cue, providing important status updates and notifications related to the dishwasher's operation.

Causes of a malfunctioning Indicator Light can stem from issues with the control board or wiring harness that powers the light, or the light itself burning out due to age or electrical surges.

Symptoms of a bad Indicator Light include:

• The light not illuminating at all, even when it should be on
• Flickering or dimming of the light during operation
• The wrong indicator light turning on or staying on inappropriately

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.