Shx3ac72uc/13 Parts

The Toe Panel Screw is an OEM replacement part for Bosch dishwashers. It secures the toe panel to the dishwasher.

Causes may involve normal wear and tear over time, improper installation, or damage from excessive force or impact. Replacing with this genuine OEM screw will reinforce your Bosch dishwasher's integrity for reliable performance.

Symptoms of a bad toe panel screw can include:

• The toe panel becoming loose, cracked, or removable
• Internal components visible underneath a loose toe panel
• Strange noises or vibration emanating from the toe panel area

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

This fine filter sits in the dishwasher's sump filter system. It screens out small food particles so wash water stays cleaner, helping prevent debris from recirculating onto dishes and protecting internal wash components for consistent cleaning performance. What it does:

• Traps fine debris before it recirculates through the spray system
• Helps maintain water clarity for more consistent cleaning results
• Worn, torn, or warped mesh can lead to gritty residue, particles on dishes, or odors
• Replace if the filter is damaged, missing, or will not lock in place

• 1 fine filter

• Power off the dishwasher, open the door, and remove the lower rack
• Turn the filter assembly counterclockwise to unlock and lift it out
• Separate the fine filter and install the new one
• Reinstall and lock the assembly clockwise until fully seated; do not force

The Door Handle is an OEM part for Bosch dishwashers. It is installed on the outer edge of the dishwasher door and is used to open and close the door.

The door handle is responsible for providing an easy and secure grip point to facilitate loading and unloading of dishes. It allows for controlled movement of the door through its range of motion.

Symptoms of a bad door handle can include:

• Looseness, wobbling, or detachment from the door
• Chipping, cracking or general wear and tear of the handle surface
• Difficulty grasping or lifting the door with the handle
• The door failing to securely latch in the closed position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Screw is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the kickplate panel at the bottom of the dishwasher in place.

Causes of needing a replacement screw may include screws becoming stripped or damaged during installation or removal, corrosion or rust buildup on the screws over time, and screws going missing or getting lost during dishwasher maintenance.

Symptoms of an issue with the Screws include:

• A loose or rattling kickplate panel
• Difficulty properly aligning or securing the kickplate
• Visible gaps or an uneven fit of the kickplate

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Float Switch is an OEM part for Bosch dishwashers. This part monitors the water level inside the dishwasher. It helps prevent overflows by detecting when the water level gets too high and signaling the control board to stop filling and start draining the water.

Causes of a bad float switch can include wear and tear from regular use, buildup of debris or mineral deposits, or electrical malfunctions.  

Symptoms of a bad float switch include:

• The dishwasher not filling with water
• Water overflowing from the dishwasher
• The dishwasher not advancing through the cycles
• Error codes related to water level issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This assembly includes the handle. Color: gray. Measures about 5 inches wide by 9 inches high by 9 inches deep.

The Silverware Basket Assembly is an OEM part for Bosch dishwashers. This basket is located in the lower rack and is used to hold utensils securely during the wash cycle.

Causes of a bad silverware basket can include damage from normal wear and tear over time or bending/warping from overload.

Symptoms of a dysfunctional basket include:

• Silverware clustering and not receiving thorough cleaning
• Tines bending or breaking off from the basket
• Dividers popping out of place
• The basket shaking or slipping during the wash cycle

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.

A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.

Symptoms of a bad sealing include:

• Water or moisture around the control panel
• Visible cracks or gaps in the sealing
• A loose or ill-fitting seal

Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.

Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.

Symptoms of a bad leveling foot include:

• The dishwasher rocking or wobbling during operation
• Difficulty in achieving a level position
• Increased noise or vibration when the dishwasher is running

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Lower Spray Arm is an OEM part for Bosch dishwashers. It is responsible for cleaning dishes located on the lower rack through its rotating spray of water.

The lower spray arm effectively washes dishes by directly targeting them with pressurized water, helping to break up and rinse away food particles and debris. It plays an integral role in the dishwasher's cleaning performance.

Causes of a bad lower spray arm include clogging, blockages, or damage to the arm itself that prevents proper rotation.

Symptoms of a bad lower spray arm are:

• Dirty dishes on the lower rack even after a full cycle
• Dishes on the lower rack not receiving adequate water coverage
• Noticeable buildup of food residue in the lower rack and spray arm area

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Terminal Box is an OEM part for Bosch dishwashers. It serves as the central hub for connecting electrical wires within the appliance, ensuring a safe and organized electrical system.

Over time, the terminal box can become damaged due to electrical malfunctions, corrosion, or physical impact. Wear and tear from regular use can also affect its integrity, leading to potential electrical issues.

Symptoms of a bad terminal box include:

• The dishwasher not starting or failing to complete cycles
• Intermittent power issues
• Burning smells or visible burns around the terminal box
• Electrical shorts or tripped circuit breakers

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This kit replaces the sliding rails that support and guide the upper dishrack, restoring smooth, level movement so the rack doesn't bind, tip, or drop during loading and unloading.

• Guides the upper rack in and out along the tub sidewalls
• Helps correct a sticking, uneven, or hard-to-slide upper rack
• Can reduce issues like a sagging rack or difficulty engaging rack stops
• Wear from age, heavy loads, or corrosion can require replacement

• Disconnect power and shut off water before servicing
• Remove the upper rack and stops to access and swap the rails
• Transfer any hardware from the old rails
• Test rack travel and ensure stops are secure before restoring power

The Water Inlet Housing is an OEM component specifically designed for Bosch dishwashers. It provides the connection point for water to enter the appliance and is responsible for metering the proper amount of water into the spray arms and sump during each cycle. Working with the electronic control module, the water inlet housing facilitates precise water distribution. 

Causes of a bad water inlet housing can include mineral buildup affecting water flow, worn or damaged valve components preventing proper metering, and failure of electronic components interfacing with the housing. 

Symptoms of a bad water inlet housing include:

• Incomplete or inefficient washing  
• Abnormal noises coming from water components
• Water leaking or spraying outside of the dishwasher 
• Error codes related to water issues

This Bosch water inlet housing replacement part is compatible with some Siemens, Gaggenau, Thermador, and select Kenmore models. Replacing the housing ensures optimal water usage.

Finish the sides of your dishwasher cutout. These white side trim strips cover the left and right edges for a clean, factory look and help replace cracked, yellowed, or missing trims that leave gaps beside the appliance.

• Finishes and protects the exposed side edges of the dishwasher opening
• Conceals small gaps between the appliance and adjacent cabinetry
• Restores appearance when trims are cracked, warped, discolored, or missing
• Helps keep the unit seated neatly in the cabinet cutout

• Disconnect power at the breaker and shut off water supply before servicing a built-in dishwasher
• Remove existing trims and clean the mounting surfaces of any residue
• Align the new left/right strips correctly; dry-fit to confirm orientation and length
• Secure per your model's service instructions; verify door clearance and alignment before pushing the unit fully back

Color: Black. For white use 00615350. For stainless use 00615352. For bisque use 00418631

The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. 

Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism.

Symptoms of an ineffective hinge lever include:

• The dishwasher door sagging or becoming misaligned  
• Difficulty fully opening or closing the door
• Loud squeaks or grinding noises coming from the hinges
• The door potentially detach from the hinge if broken 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.