Shx3ar75uc/27 Parts

This replacement spring restores proper tension to the linked mechanism so it moves smoothly and returns to its intended position. Replacing a worn or broken spring helps correct looseness, sticking, and misalignment in the affected assembly. What it does:

• Provides return force and tension for the associated latch, lever, or panel
• Helps the mechanism open/close smoothly and stay in position
• When weakened or broken, can cause poor latching, sluggish return, or a loose feel
• Reduces squeaks or rattling from an under-tensioned mechanism

• 1 spring

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note spring orientation and anchor points before removal; take reference photos
• Use needle-nose pliers to remove/attach the spring; mind pinch points and stored tension
• Refer to your model's parts diagram for routing and placement

The Control Unit is an OEM part for Bosch dishwashers. As the central processor, it operates all wash and rinse cycles based on programming. The control unit receives user inputs to coordinate water levels, temperatures, and other factors for stellar results.

Symptoms of a faulty control unit include: 

• Inability to activate wash cycles or accept changes to settings
• Error codes or lights signaling control errors
• No response from touch controls or dials
• Failure to properly dispense detergent or rinse aid

Causes of control unit failure often stem from prolonged exposure to moisture and thermal cycling. Mineral deposits may build up over time, disrupting sensitive electronics.

Replacing your control unit ensures customized cleaning and maintenance of intelligent functions. This genuine Bosch component prevents further issues like improper washing. Compatible with some Thermador, Gaggenau, and Kenmore models.

This insulating part installs in the appliance to form a protective thermal barrier. It helps limit heat transfer to nearby areas and components for safer operation and more consistent performance.

• Creates a thermal barrier around the designated section of the appliance
• Helps maintain stable internal temperatures and operating efficiency
• Shields adjacent wiring, plastics, and trim from excessive heat exposure
• Signs of failure can include brittle/crumbling insulation, visible gaps/missing sections, or hot spots on nearby panels

• Disconnect power and allow the unit to cool completely before servicing; shut off gas/water if applicable
• Access the insulated area and note the original orientation/coverage before removal
• Reuse existing fasteners/retainers; seat the insulation without over-compressing it
• Handle material carefully; wear gloves and eye protection to avoid irritation and cuts

The Control Facia is an OEM component specifically designed for Bosch dishwashers. It houses all of the control buttons, knobs, and electronic displays that allow for operation and cycle selection. 

The control facia is responsible for the user interface, providing an intuitive way for users to start, pause, cancel, and select options for wash cycles. It incorporates durable membrane buttons and illuminated symbols for ease of use.

Symptoms of a bad control facia include:

• Non-responsive or stuck buttons  
• Faded, worn, or damaged labels and symbols
• Electrical issues like flickering or non-working displays
• Missing mounting screws or loose fit that causes buttons to malfunction

Causes can include general wear and tear, repeated exposure to moisture during cleaning, or impacts that crack or distort the facia surface. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This small hardware washer distributes clamping force and protects surfaces under a screw or nut in your appliance. Replacing a worn or missing washer helps restore a secure fit and reduces vibration or movement in the assembly.

• Distributes fastener load to prevent gouging or deformation of mating surfaces
• Maintains proper spacing and alignment where a washer is specified
• Helps resist loosening from vibration over time
• Common signs: loose or shifting components, rattling, or visible wear around the fastener

• Disconnect power and any water/gas supplies before servicing
• Support the component and remove the fastener to access the washer
• Install the new washer in the same position/orientation as the original; do not overtighten
• Reassemble and verify the fastened joint is secure and operates smoothly

The Power Module Programmed is an OEM component specifically designed for advanced Bosch dishwashers. It serves as the intelligent control center, enabling customized cycles tailored for optimal washing results. The programmed power module analyzes load sizes and soil levels to self-adjust water, temperatures, and cycles accordingly.

Causes of failure can include defects in electronic programming from harsh chemicals or water exposure over time. Physical damage such as pins or connections becoming dislodged may also hinder function.

Symptoms include:

• Inability to run specialized cycles like Quick Wash or Glass Care  
• Defaulting to only standard cycles regardless of load type
• Fault codes or resetting of customized programming  
• Full non-responsiveness requiring replacement

Replacing with this genuine Bosch module restores smart cycle optimization. It regulates washing perfectly for dishes, pots, pans, and delicate glassware alike. Compatible with Miele, Thermador, and select Asko models.
 

The Hose Vent is an OEM part for Bosch dishwashers. It is responsible for venting excess heat, moisture, and odors generated during the washing process, ensuring a safe and suitable internal environment. The hose vent guides steam out of the appliance, preventing damage caused by pressure buildup. 

Symptoms of a bad hose vent include: 

• Visible damage or cracks along its length
• Kinks or depressions restricting airflow
• Disconnections from vent ports or dishwasher interior
• Excess moisture inside the dishwasher 

Causes of hose vent failure can be related to extended use over time, crushing/pinching from the installation environment, or buildup of debris affecting airflow.

This genuine Bosch replacement hose vent will restore proper moisture removal. It is compatible with some Siemens, Thermador, Gaggenau, and Kenmore models. Replace yours today for reliable venting performance.

This replacement screw secures appliance panels and internal brackets so components stay tight and aligned during everyday use. Replacing missing or stripped hardware restores a solid fit and helps minimize vibration and rattling.

• Fastens covers, panels, and brackets to their mounting points
• Helps maintain alignment of the attached component
• Reduces movement that can cause noise or wear
• Typical reasons to replace: missing screw, stripped head/threads, loose panel or bracket

• Disconnect power and, if applicable, shut off water before servicing
• Use the driver bit specified for your model; hand start threads to avoid cross-threading
• Tighten snugly without over-torquing to prevent stripping
• Replace screws one at a time to maintain alignment

This genuine screw secures panels, brackets, and internal components in your appliance, keeping them tight and aligned. Replace worn or missing fasteners to stop rattles and restore a proper fit.

• Fastens sheet-metal panels, brackets, or hardware in place
• Helps maintain alignment and reduce vibration or noise
• Restores secure attachment when a screw is stripped, corroded, or missing
• Typical signs: loose or shifting parts, rattling, or gaps at joints

• Disconnect power; shut off water or gas before servicing.
• Match this screw to the original location and size; replace one at a time.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver type/size required by your model.

Fine filter designed to trap food and debris in the dishwasher's wash system, helping prevent pump clogs and reduce redeposited soils on dishes. Direct replacement for the dishwasher's original fine-mesh filter. What it does:

• Captures food particles and fines from wash water to keep the pump and circulation system clear.
• Helps reduce food redeposit and maintain wash performance when functioning properly.
• Can prevent coarse debris from reaching the wash pump and drain components.
• Common signs a filter needs cleaning or replacement include visible food on dishes, recurring clogs, or poor wash results.

• Always disconnect power to the appliance and turn off the water supply before servicing.
• Remove the lower dish rack to access the filter area; handle the filter gently to avoid damage.
• Clean the filter seat and surrounding area before installing; ensure the filter is seated and secured per the owner's manual.

This factory screw secures appliance components per the original design, helping stop looseness and vibration. Replace a missing, stripped, or corroded fastener to restore a solid, rattle-free fit and protect nearby parts from damage.

• Secures panels, brackets, or internal components as specified by the manufacturer
• Helps maintain proper alignment and reduces vibration or rattling
• Replace if the head is stripped, threads are damaged, or the screw is missing
• Common signs include loose or misaligned panels/trim and hardware that won't stay tight

• Disconnect power and turn off water or gas supply as applicable before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly without overtightening
• Retain any original washers, bushings, or clips used in the assembly

This is a Bosch dishwasher control board. The dishwasher's control board ensures that the various cycles and settings can be properly managed, such as the washing and draining cycles. If the user notices issues with dishes not coming out clean after a full cycle, the control board should be checked for error codes or signs of visible wear and tear that may indicate it needs to be replaced. Make sure that the dishwasher is turned off, unplugged, and completely disconnected from its power and water sources. It's recommended that work gloves are worn to prevent injury. This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part and as such is sold individually and made from durable, high-quality, non-corrosive materials to ensure the highest possible quality. This part is compatible with dishwashers that have been manufactured by Bosch, Thermador, Gaggenau, and various other brands.

Replacement tube for Bosch appliances that routes water or drainage between components, helping restore correct flow, reduce pooling and leaks, and maintain normal appliance performance. What it does:

• Channels water between valves, pump and drain to enable normal water movement.
• Replaces cracked, split or blocked tubing that can cause leaks or standing water.
• Helps restore proper drainage and prevent water from pooling inside or under the appliance.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect and replace any damaged clamps, seals or fittings when installing the tube.
• Route the tube exactly as the original to avoid kinks; secure with the factory clamps or equivalent.

This temperature sensor (NTC) monitors wash temperature and reports it to the control so the cycle heats and advances correctly. Replacing a faulty sensor can restore proper cleaning performance and normal cycle times. What it does:

• Measures water temperature and sends resistance changes (NTC) to the control
• Helps the control regulate heating and cycle progression
• Failure symptoms can include no/insufficient heat, extended cycles, or poor drying
• May trigger a temperature-sensor fault (e.g., E11 on some models)

• 1 temperature sensor

• Disconnect power and turn off water supply before servicing
• Access is typically at the sump/heat-pump area; remove the toe-kick/lower panel as needed
• Expect some residual water; place a towel or tray to catch drips
• Ensure the sensor seats fully and the seal is in good condition to prevent leaks

Tall item spray head.
This Spray Head is an OEM part for Bosch Dishwashers. It plays a role in distributing water evenly during the dishwasher's washing cycles. Continuous exposure to hard water, debris, or mineral deposits can cause issues with this component.

What Causes a Bad Spray Head:
Hard water deposits, debris, or mineral buildup can clog or block the spray head, affecting its performance. Physical damage can also impair its functionality.

Symptoms of a Bad Spray Head:

• Inadequate cleaning of dishes
• Uneven water distribution
• Reduced water pressure during washing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
 

This factory screw secures select Bosch/BSH appliance components. Use it to replace a missing or damaged fastener so panels, brackets, or trim stay tight and rattle-free during operation.

• Tightens and holds appliance parts such as panels, brackets, or trim in place
• Helps correct issues like loose or vibrating panels caused by a missing/stripped screw
• Maintains proper fitment after service or disassembly
• Torx T20 drive head helps resist cam-out during tightening

• Unplug power and shut off any water supply before servicing
• Use a T20 Torx driver; hand-start to avoid cross-threading
• Do not overtighten—snug to manufacturer torque guidance if available
• Replace any additional missing or damaged fasteners for even clamping