Shx9er55uc/50 Parts

This is the insert for the dishwasher silverware/utensil basket. It helps separate and support flatware so pieces stay upright and spaced for proper spray coverage, replacing a cracked or missing insert to restore normal loading and cleaning. What it does:

• Fits into the utensil basket to separate forks, spoons, and knives
• Helps prevent nesting and keeps small items from slipping through
• Holds flatware upright to maintain consistent spray reach
• Typical symptoms: broken or missing sections, warped piece, utensils tipping or sliding out

• 1 insert

• Make sure the dishwasher is off and cool before working inside
• Remove the lower rack and silverware basket if needed for access
• Align the insert with the basket openings and press it fully into place
• Verify it sits flat and does not interfere with rack movement

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping

The Flow Meter Sensor is an OEM component specifically designed for Bosch dishwashers. It monitors water volume flowing into the unit during cycles to ensure sufficient levels for optimal cleaning performance. Precise detection prevents inefficient or ineffective washings.

Causes of a bad flow meter sensor can involve scale buildup obstructing readings or normal internal component wear reducing accuracy over time. Heat exposure risks also impact functionality warranting replacement. 

Symptoms of a bad flow meter sensor include:

• Incomplete or insufficient water fill during cycles  
• Soiled dishes remain even after normal duration wash/rinses
• Faulty water usage readings causing cycle malfunctions

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace to restore full water volume sensing for thoroughly clean dishes on every cycle.
 

This insert fits into its designated housing or assembly to secure or locate a component. Replacing a worn or broken insert restores a snug fit and helps the appliance operate as intended.

• Seats or supports a mating component within the appliance assembly
• Maintains proper alignment and spacing for reliable operation
• Direct replacement for a cracked, deformed, or missing insert
• Typical signs: loose fit, component movement, or visible damage to the insert

• Disconnect power and, if applicable, turn off water before servicing
• Refer to your model's service information to locate and orient the insert correctly
• Remove the damaged insert and clean mating surfaces prior to installation
• Press or slide the insert fully into place; do not force parts together

The Shower is an OEM component designed specifically for Bosch dishwashers. It provides superior coverage and washing performance through its unique rotating arm and nozzle design. Causes of a bad spray arm and shower head include mineral deposits restricting spray patterns, cracked or broken assembly parts, or worn nozzles that no longer fully rotate. 

Symptoms of a bad part include: 

• Soil or food debris that isn't fully removed from crevices or hard to reach areas
• An arm that doesn't rotate smoothly during the cycle or gets stuck
• Cracks or breaks in the plastic that cause leaking or restricted spray patterns

This Bosch part can also be used on Thermador and Gaggenau appliances.

The Screw is an OEM replacement part for Bosch dishwashers. Hundreds of screws hold the appliance panels and internal mechanisms securely in place. Consistent, protective enclosures ensure long-lasting performance.

Causes of a bad screw can include stripped threads from repeated tightening/loosening during repairs. Corrosion posing integrity risks may develop if water penetrates screw heads over time. 

Symptoms of a bad screw include: 

• Panels or racks that rattle or come loose during operation
• Gaps appear that allow residual moisture to seep within
• Internal components shifting position from the original assembly
• Loose wiring susceptible to abrasion posing electrical hazards

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimizing water usage and spray intensity. 

Causes of damage to the divertor motor can include regular wear and tear, exposure to water and detergent over time, and electrical issues such as wiring problems or faults in the control board.

Symptoms of a failing Divertor Motor include:

• Inadequate water distribution during cycles, which can lead to uneven cleaning results.
• The dishwasher making unusual noises, such as humming or grinding, which may indicate a struggle in the motor function.
• Certain wash zones receiving little to no water, affecting the appliance's overall performance.
• Error codes displayed on the dishwasher panel that relate to water circulation problems.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door cable links the door hinge to the tension spring to counterbalance your dishwasher door, helping it open smoothly and stay under control. Replace a worn or broken cable to restore proper door action.

• Connects the door hinge to the spring to counterbalance door weight
• Helps prevent the door from dropping open or slamming
• Common symptoms: door feels heavy, drops quickly, or won't stay in position
• Uneven or crooked door movement can indicate a failed cable on one side
• Visible fraying or a snapped cord near the spring/pulley area

• Disconnect power at the breaker and shut off water before servicing
• Support the door and carefully relieve spring tension before removing the cable
• Route the new cable exactly as the original over the pulley; attach to hinge and spring
• Inspect both sides, springs, and pulleys; replace any worn components for balanced operation

This fixing kit is the original installation hardware set used to secure specific components or panels on your appliance. Replacing worn or missing hardware restores a solid, rattle-free fit and proper alignment after installation or service.

• Provides the mounting fasteners/brackets needed to attach a panel or subassembly to the appliance
• Addresses loose or missing hardware that can cause vibration, rattling, or shifting
• Helps correct gaps or misalignment after installation or repair
• Matches original attachment points for a secure, model-correct fit

• Disconnect power before servicing; wear appropriate safety gear
• Compare new hardware to the originals and install in the same locations/orientation
• Tighten fasteners evenly; avoid overtightening into plastic or thin sheet metal
• Verify level, clearances, and smooth operation after securing components

This small replacement insert restores proper fit, finish and component alignment in compatible Bosch appliances. It helps secure panels or controls and keeps gaps closed for a clean, stable installation. What it does:

• Replaces a worn, damaged or missing insert used to align or secure adjacent trim and panels.
• Helps reduce rattling, looseness or misalignment caused by missing interior trim.
• Restores a finished appearance where the original insert is broken or missing.
• Works as a non-electrical, mechanical trim component—no wiring changes required.

• Disconnect power to the appliance before accessing internal panels or trim.
• Use basic hand tools to remove surrounding trim; keep fasteners for reassembly.
• Check fit and orientation before final tightening to avoid panel distortion.

This temperature sensor (NTC) monitors wash temperature and reports it to the control so the cycle heats and advances correctly. Replacing a faulty sensor can restore proper cleaning performance and normal cycle times. What it does:

• Measures water temperature and sends resistance changes (NTC) to the control
• Helps the control regulate heating and cycle progression
• Failure symptoms can include no/insufficient heat, extended cycles, or poor drying
• May trigger a temperature-sensor fault (e.g., E11 on some models)

• 1 temperature sensor

• Disconnect power and turn off water supply before servicing
• Access is typically at the sump/heat-pump area; remove the toe-kick/lower panel as needed
• Expect some residual water; place a towel or tray to catch drips
• Ensure the sensor seats fully and the seal is in good condition to prevent leaks

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This factory replacement spring restores the correct return force in the original mechanism so parts move, hold, and release as designed—bringing back smooth, reliable operation and preventing premature wear on related components.

• Provides controlled tension/return force within the intended assembly
• A weak, stretched, or broken spring can cause sticking, weak action, or failure to hold/release
• Replace if the original is deformed, missing, corroded, or broken
• Designed to fit and function like the original for consistent performance

• Disconnect power (and shut off water supply if applicable) before service
• Springs can release suddenly—use eye protection and needle-nose pliers
• Photograph the original routing/orientation before removal to match placement
• Access points and procedures vary by model; refer to the service manual

This genuine replacement bearing supports the washer drum for smooth, stable rotation and helps reduce noise and vibration caused by worn or damaged bearings. Restores proper drum alignment for quieter operation. What it does:

• Supports the inner drum so it spins smoothly and stays aligned
• Reduces grinding, rumbling, squeaking or knocking noises from the drum
• Helps prevent excessive drum wobble that can damage seals or the tub
• Used when worn bearings cause rough rotation, metal-on-metal noise, or visible drum play

• Disconnect power (and water if applicable) before starting any repair
• Replacing this bearing typically requires partial disassembly of the washer/drum assembly and specialty tools
• Inspect shaft/hub, seals, and surrounding components for wear and replace if damaged

The Frame is an OEM part for Bosch dishwashers that provides support and organization for your cutlery, offering a designated space for your forks, knives, spoons, and other utensils. 

A bad frame can occur due to wear and tear, accidental damage, or exposure to harsh chemicals. Signs of a faulty frame include cracks, broken sections, or difficulty in smoothly sliding the drawer in and out.

Symptoms of a bad frame include:

• Cracks or broken sections in the frame 
• Difficulty in sliding the cutlery drawer in and out
• Unorganized or unstable storage of cutlery 

Replace your damaged or worn-out frame with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Fixing kit supplies the replacement mounting hardware needed to secure appliance panels and components during repairs. It restores proper support to reduce vibration, rattling and misalignment for a stable, quiet installation. What it does:

• Provides the mounting fasteners and clips that hold panels, trim or internal brackets in place.
• Replaces missing or damaged hardware that can cause loose or rattling panels.
• Restores proper alignment to help eliminate noise and improve fit between parts.
• Used when securing components during reassembly after repair or service.

• Disconnect power (and water if applicable) before beginning any repair.
• Retain and compare new hardware to original parts to ensure correct fit before installation.
• Hand-start screws and fasteners, then tighten securely—do not overtighten to avoid stripping.