Srd 25S5w Parts

This evaporator fan blade is the rotating plastic impeller that moves cold air from the evaporator across the freezer and refrigerator compartments, restoring proper airflow for even cooling. What it does:

• Circulates air over the evaporator coil so cooled air is distributed through the appliance
• Helps maintain even temperatures throughout the fridge and freezer sections
• Worn or damaged blades can cause reduced airflow, weak cooling, or abnormal fan noise
• Replacing the blade can restore normal airflow when the motor and housing are otherwise functional

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access typically requires removing the evaporator cover in the freezer compartment
• Inspect the motor shaft and blade hub for damage and ensure the blade seats securely on the motor
• If fan noise or continued airflow problems persist after installation, verify the evaporator fan motor and mounting components

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower or a lawn tractor.The tire for a lawn mower or a lawn tractor might eventually have to be replaced if it shows signs of damages that cannot be fixed by a basic repair. If the tire has been damaged, it should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Weed Eater, and Craftsman.

This replacement part is a handle grip. This part is found in various types of lawn mowers and allows the user to operate the shift mechanisms from the seated position. It also reduces the amount of pressure the pedals experience. A new handle grip might be needed if the current one is no longer able to shift. If the user cannot grip this part due to damage, it is best to replace it so that the machine can return to working order. If the equipment is not operating smoothly, the handle grip may have become worn down. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This idler pulley is an authentic OEM replacement part sourced directly from the manufacturer. This pulley guides the drive belt on riding lawn mowers to turn the blades that cut the grass. If the pulley is not working properly, or if it seizes or is jammed, the blades will not turn to cut grass. This can happen if large objects are run over and become lodged under the deck. If the pulley comes in contact with large stationary objects like hidden rocks, it may be damaged and not work. The idler pulley will need to be replaced if the blades are not turning.Before replacing the pulley, make sure the mower is cool to touch and remove the spark plug. Ensure that the actuator is in the off position and lower the blade to make it easier to access the pulley. Wear safety gloves to prevent injury when working with the blades. Detach all retaining pins from the deck to release them from the mower. Remove the nut holding the pulley onto the shaft and then remove the pulley and install the new one. Reverse the process to reassemble the mower. This idler pulley is a solid metal part that is sold individually. It does not come with a bolt or nut. This idler pulley is designed for use in lawnmowers and lawn tractors manufactured by Husqvarna.

An interlock switch is responsible for shutting down the engine if the equipment is running in an unsafe manner. It is a safety component that prevents the engine from starting if you aren't pressing down the brake with your foot or if the parking brake isn't in place. If the interlock switch beaks, the current will no longer reach the solenoid coil even if the brake is depressed. This will result in the engine not starting. If turning the ignition key doesn't result in the click of the solenoid, the damaged part is likely the interlock switch. The first step is to disconnect the battery and then release the steering plate. Next, remove the interlock switch under the hood and install the new one. At this point, the other parts can be reinstalled, and the lawn mower can be used. This is a genuine manufacturer-approved OEM part that is designed for Husqvarna, Ryobi, Craftsman, Dixon, Weed Eater, Murray, Ariens, and Poulan lawn mowers. This interlock switch is made with a high-quality plastic body and is sold as an individual component. A screwdriver will be required to make this replacement.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This part is a replacement steering shaft extension. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft extension is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models.The steering shaft extension is essential for equipment functionality as it connects the steering wheel to the steering shaft. If this part is bent, dented, snapped, or otherwise ineffective, the user may have trouble properly maneuvering the lawn tractor. Thus, this part should be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft extension, the appropriate owner's manual and equipment diagrams should be referred to. This steering shaft extension is suitable for use on a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This replacement part is a reverse module. This is a genuine replacement part made by Husqvarna. This part is used in machines that are able to drive using an engine. The reverse module is able to reverse the motion of the wheels so that the machine can drive backward. A new reverse module might be needed if the appliance struggles to switch from driving forward to driving in reverse. This can be from a malfunctioning reverse module and should be replaced if this is the case. This repair should be fairly easy. Be sure to refer to the proper user manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.

This bow tie cotter pin is a manufacturer part designed to replace the original on select riding lawn mowers. The cotter pin has many applications, depending on the exact model of tractor, but typically acts as an anchor. The pin is installed in a drilled hole or small shaft on a bolt or axle and then the sections of the pin are spread to keep the assembly in the perfect position and hold everything together. These pins allow for some flexibility, but that also makes them subject to damage or breakage because of vibrations and other issues. This genuine cotter pin fits over 150 tractors from brands like Jonsered, Husqvarna, Weed Eater, Poulan, and Craftsman. Pliers may be required to replace this part. Always wear gloves and eye protection for added safety and disengage the engine before beginning any repairs. This cotter pin is sold as a single unit and does not include any additional components or hardware.