Umv11252cas Parts

This base is the appliance's lower cabinet section that supports internal components and helps stabilize the unit. It restores a solid foundation so the appliance sits level and protects internal parts from floor contact and debris. What it does:

• Provides structural support for the appliance's internal assemblies and controls
• Helps stabilize the unit and reduce excessive vibration or rocking
• Protects wiring, motors and other components from contact with the floor
• A damaged or cracked base can cause noisy operation, misalignment, or uneven sitting

• Disconnect power (and gas if applicable) before beginning any repair
• Follow the OEM service manual for disassembly and reassembly steps
• Replacement may require removing the cabinet and/or drum; having a second person helps with lifting and alignment
• Inspect and reuse original fasteners only if undamaged; replace any worn mounting hardware

Color: metallic. It measures about 6 inches wide by 9-1/2 inches deep.

This transformer provides the low-voltage power needed by the appliance's control and user-interface circuits so systems like the dispenser, ice maker, or control board can operate reliably. What it does:

• Steps down mains power to low-voltage power for control boards and user-interface components
• Restores power to dispensers, ice makers, timers or control modules that have lost low-voltage supply
• Commonly replaced when control circuits are unresponsive, displays are blank, or dispenser functions fail
• Matches OEM function for direct replacement of the failed transformer

• One replacement transformer

• Disconnect all power to the appliance before starting work to avoid shock hazard
• Handle wiring connections carefully; make secure electrical connections and restore grounding

This control panel is the exterior console that houses the user controls and display, restoring clean, responsive operation and readable indicators for the appliance. It provides the interface you use to select cycles, settings, and start functions. What it does:

• Replaces a worn, cracked, or unresponsive console so buttons and displays work reliably
• Restores visible cycle/status indicators and button labels for normal operation
• Helps resolve symptoms like unrecognized button presses, missing display segments, or cosmetic damage to the front control area
• Works with the appliance's existing electronics and mounting hardware when the correct OEM part is used

• One control panel/console

• Refer to the wiring diagram and disconnect power before starting
• Some models require removal of the outer cabinet or console bezel to access mounting screws and connectors
• Handle the panel carefully to avoid scratching the finish or damaging attached wiring and connectors
• If the panel connects to a separate electronic control board, verify connectors seat fully and clips engage during reassembly

This main damper assembly regulates airflow between compartments to help maintain proper refrigerator temperatures. It replaces a worn or stuck damper to restore controlled air delivery for more consistent cooling performance. What it does:

• Controls the amount of cold air flowing from the freezer into the fresh-food compartment
• Helps stabilize internal temperatures when opening/closing doors or during mode changes
• Commonly fails by sticking open or closed, causing warm fresh-food temps or overcooling
• Works with the refrigerator's control system to modulate airflow based on demand

• Disconnect power before beginning any service to avoid electrical shock
• Handle the damper flap and cable/gear gently to prevent damage during installation
• Inspect surrounding seals and mounting points; secure all fasteners and reconnect any harnesses
• After installation, restore power and verify proper operation across temperature settings

This factory-assembled microwave door replaces a damaged or hard-to-latch door to restore a secure seal and dependable operation. A new door helps ensure proper interlock function and clear visibility while cooking.

• Maintains the door seal to contain microwave energy within the cavity when closed
• Engages the door latches to actuate the interlock switches so the unit can run
• Provides a clear viewing window and integrated handle for safe, easy operation
• Common symptoms: door won't close or stay closed; unit won't start unless pressing on the door; broken/loose handle; cracked or warped door; "Door" error message

• Disconnect power at the breaker or unplug the unit before servicing
• Replace the door as a complete assembly; do not disassemble door components
• Support the door, lift it off the hinge pins, then align and seat the new door; verify smooth latching and level alignment
• Do not open the microwave cabinet; internal components can retain a dangerous electrical charge

The Fan Motor is an OEM part for Whirlpool microwaves. This fan motor is responsible for circulating air through the venting system. It works to evacuate fumes, smoke, and odors from the cooking area and direct them outside through the vent hood.

Causes of a bad fan motor can include excess dust or debris buildup hindering performance, bearing wear over time, or failure of electronic motor components.

Symptoms of a bad fan motor include:

• Inadequate or no air flow from the vent hood
• Strange noises coming from the vent system
• Reduced hood lighting levels
• Overheating or burning smells detected from the cooking surface or vent hood

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Microwave Control Board is an OEM part for Whirlpool microwaves. As the brains of the microwave, it manages all power, timing, temperature, and safety functions. The control board controls the microwave's performance based on user inputs through the control panel.

Symptoms of a bad control board include:

• The microwave not powering on or displaying an error message
• Issues with buttons or dials not working properly  
• Inconsistent or unexpected heating when cooking
• Repeated tripped circuit breakers when running the microwave

Causes of failure are often related to electrical surges, moisture damage over many years of use, or defects in the electronic components themselves. 

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwaves. 

Replacement plate that restores fit and finish for compatible Whirlpool appliances. Install to replace a cracked, warped, or cosmetically damaged plate and help maintain proper component alignment and appearance. What it does:

• Replaces a damaged or worn plate to restore the appliance's original coverage and appearance.
• Helps prevent gaps where food, grease, or debris can collect around the affected area.
• Maintains proper alignment and support for adjacent parts that rely on the plate for mounting or spacing.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools and follow the OEM diagram for correct orientation and fastener locations.
• Inspect mounting hardware and any gaskets; replace separately if worn or damaged.

The Interlock is an OEM part for Whirlpool microwaves. It is a safety device that prevents the microwave from operating unless the door is securely closed.

Causes of a failing microwave interlock can include wear and tear of moving parts over extended use. Physical damage from excessive force on the door or foreign debris caught in the locking mechanism can also disable proper function.

Symptoms of a bad interlock include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Interlock Switch is an OEM part for Whirlpool microwave ovens. It is an electrical component of the safety interlock system that prevents the microwave from operating unless the door is securely closed.

Causes of a bad interlock switch can be prolonged exposure to microwave energy, which can degrade electrical contacts over many years. Physical damage from excessive force on the door or foreign debris is also possible.

Symptoms of a failed interlock switch include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This grill vent is the outer vent trim that restores proper airflow and appearance for your appliance. It replaces a cracked, broken or missing vent to help keep the oven or range exterior neat and allow normal ventilation. What it does:

• Covers and protects the appliance vent opening while directing air flow
• Replaces damaged or melted vent trim that can detract from appearance
• Helps keep debris and large particles out of the vent path
• Visible exterior part—symptoms include cracks, warping, discoloration or gaps at the vent area

• Disconnect power to the appliance before beginning any work
• Typically installs with simple clips or screws; retain all fasteners and trim pieces
• Inspect surrounding trim and seals for damage and replace if needed

This wire harness assembly routes power and control signals between the appliance's main control and its components to restore reliable electrical connections. It replaces a damaged or intermittent wiring assembly to help components receive proper power and signals. What it does

• Connects the main control to heating elements, sensors, switches, or other components depending on appliance model
• Restores lost or intermittent power/signal paths caused by frayed, burned, or broken wires
• Helps resolve symptoms like components not powering, intermittent operation, or electrical arcing at connection points
• Maintains correct wire routing and connector fit for safe operation when installed properly

• Disconnect all power (unplug or switch off breaker) before beginning work
• Photograph existing routing and connector locations to ensure correct reinstallation
• Route harness without pinching; secure with original clips or ties and avoid heat sources

This replacement mounting plate secures internal components so the appliance operates quietly and stays aligned. Replacing a damaged or bent plate helps stop rattling, prevent part movement, and restore proper fit between adjoining parts. What it does:

• Provides a stable mounting surface for nearby components and fasteners
• Prevents parts from shifting or vibrating during operation
• Helps eliminate rattling or noise caused by a loose or bent plate
• Restores correct alignment where the original plate was damaged or deformed

• One replacement plate

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Wear gloves and eye protection; edges may be sharp
• Use correct fasteners and torque to avoid bending the new plate;