Umv11602cb Parts

This replacement microwave door restores a secure close, proper latch engagement, and a clear viewing window when the original door is cracked, bent, or misaligned—helping your microwave operate correctly and look like new.

• Provides the front barrier and viewing window for the cooking cavity
• Aligns and actuates the door latches/switches; a damaged door can prevent the unit from starting
• Replaces cracked or shattered panels and bent/warped door frames
• Resolves issues where the door won't close or stay latched without pressure

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Support the door with two hands; lift off hinges or remove hinge screws/pins per model design
• Transfer any reusable trim or hardware only if directed by the manufacturer
• After installation, verify smooth closing, proper latch engagement, and even gaps around the door

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

Note: This coupler is compatible with the glass tray that has the 3 triangles that engage the coupler. In some cases, the factory used a tray that has 3 half-circles. For that coupler, use part# W10435116.

The support is an OEM part for Whirlpool microwaves. This motor coupler works to connect the microwave's motor to the turntable shaft, transferring power from the motor to turn the turntable.

Causes of a bad motor coupler can include wear and tear over time, excessive use of the microwave leading to deterioration of parts, or damage due to impact or mishandling.

Symptoms of a bad motor coupler include:

• The turntable not spinning or rotating unevenly
• Grinding or clicking noises coming from the microwave interior
• The turntable shaft being loose or out of alignment

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Mounting Nut Assembly is an OEM replacement part for Whirlpool microwaves. It securely fastens the microwave to its mounting bracket, ensuring stability and safety during operation. It provides a secure and reliable connection, preventing the microwave from shifting or falling during use.

A bad mounting nut can occur due to various reasons, such as wear and tear, improper installation, or accidental damage. If you notice symptoms such as the microwave becoming loose or wobbly, or if the mounting nut is missing or damaged, it may be time to replace it.

Symptoms of a bad microwave installation mounting nut include:

• Microwave becoming loose or wobbly
• Missing or damaged mounting nut

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This magnetron is the microwave's high-voltage tube that generates the microwaves responsible for heating food. Use it as a direct replacement when your microwave powers on but no longer heats properly. What it does:

• Generates the microwave energy that heats and cooks food inside the oven cavity.
• A failing magnetron commonly causes the oven to run but not heat; other signs can include weak or uneven heating.
• Can produce unusual humming, arcing or sparking inside the cavity, or a burning smell when failing.
• Works as part of the high-voltage circuit; other components affect overall function.

• Disconnect power and unplug the appliance before servicing; the high-voltage capacitor must be safely discharged.
• Handle the magnetron carefully by the mounting flange—avoid touching the ceramic antenna or terminals.
• Verify exact part number compatibility with your model before ordering; some repairs require replacing other high-voltage components.

This Light Housing secures and protects the interior lamp assembly, helping keep the compartment safely illuminated. Replace a cracked or heat-damaged housing to restore a stable bulb fit and consistent lighting performance. What it does:

• Provides a stable mount for the interior light bulb/socket
• Shields nearby wiring and components around the lamp area
• Helps position the light for proper illumination inside the compartment
• Common signs of wear: cracked or melted housing, loose bulb fit, lens/cover won't stay attached, intermittent lighting from a poor physical connection

• 1 light housing

• Disconnect power to the appliance before servicing
• Remove the lens/cover and bulb, then unfasten the damaged housing
• Transfer the existing socket, wiring, and any hardware from the old housing as needed
• Reinstall the housing, replace bulb/cover, restore power, and test the light

The Interlock Switch is an OEM part for Whirlpool microwaves. It monitors the position of the microwave door and signals to the control board whether it is safe to operate. 

Causes of a bad interlock switch can include normal wear over time as the switch contacts open and close frequently with door usage. Lubricant breakdown or damage to wires/connectors may also cause failures.

Symptoms of a faulty interlock switch include:

• The microwave running with the door open 
• Failure to start the microwave regardless of door position
• Inoperative door or faulty door latching 

Replacing with this genuine OEM switch restores an essential safety feature. With accurate door monitoring, microwave energy transmission only occurs when intended.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This Whirlpool Microwave Interlock Switch is an OEM part specifically compatible with various Whirlpool microwave models. This safety component ensures that the microwave operates only when the door is securely shut, thereby preventing accidental exposure to microwave energy. 

The failure of microwave interlock switches is often due to mechanical wear, electrical faults, or alignment issues. A defective interlock switch can result in the microwave not starting, running with the door open, or displaying erratic behavior, all of which are serious safety concerns.

Symptoms of a failing microwave interlock switch include:

• The microwave does not start or operate intermittently.
• The appliance runs while the door is open.
• Sudden stopping of the microwave during operation.
• Unusual sounds when the microwave door is opened or closed.
• The control panel is unresponsive or behaves irregularly with the door closed.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This is the appliance's main power cord. It delivers household electricity to the unit so it can operate safely and reliably.

• Supplies AC power from the wall outlet to the appliance's internal wiring
• A damaged or failed cord can cause no power, intermittent power, or tripped breakers
• Replacing a worn cord can restore consistent power and improve safety

• Unplug the appliance and turn off power at the breaker before service
• Route and secure the cord to prevent pinching or abrasion

This replacement screw secures appliance components such as panels, brackets, and covers. Replace a missing or stripped fastener to restore a tight, rattle-free fit and proper alignment. What it does:

• Secures panels, brackets, trim, and internal assemblies in place
• Replaces lost, corroded, or stripped hardware
• Helps reduce vibration and rattling from loose components
• Maintains correct fit and alignment of covers and parts

• One screw

• Disconnect power before servicing; wear appropriate safety gear
• Match the screw to the original location; transfer any washers or clips from the old hardware
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair damaged receiving threads before installing the new fastener

This genuine replacement door handle restores a secure grip and smooth operation to your appliance door. It replaces a worn, cracked, or broken handle so you can open and close the door safely and comfortably. What it does:

• Provides a sturdy handhold for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that cause difficulty operating the door
• Restores proper alignment and fit where the original handle has worn or failed
• Helps reduce accidental slippage or dropping of the door during use

• One door handle

• Handle requires basic hand tools for removal and installation; refer to your model's service instructions
• Keep the appliance unplugged or power disconnected when working near electrical components
• Tighten mounting fasteners securely but avoid over-torquing to prevent cracking
• If the handle mounts to an inner door panel or trim, support the door edge to avoid damage during installation

This inlet cover protects and conceals the appliance's inlet area, keeping wiring and connections secure and helping prevent debris from entering. It restores a clean, safe inlet opening and supports proper component alignment. What it does:

• Shields the inlet opening and nearby connections from dust and debris
• Holds inlet components in position to reduce movement and wear
• Helps prevent snagging or accidental contact with inlet wiring or fittings
• Visible damage or a loose/misaligned cover can expose connections and lead to leaks or electrical issues

• One inlet cover

• Disconnect power and shut off water supply before beginning work
• Remove the appropriate access panel or trim to reach the inlet area
• Replace cover, securing with the original screws or clips; do not overtighten
• Inspect nearby gaskets, fittings and wiring while replacing the cover

Color: Chrome (Qty of 1)

This control bracket secures the appliance's electronic control or user interface assembly. It provides firm support and proper alignment so the control components mount correctly and remain stable during use.

• Mounts and supports the control or UI assembly inside the appliance
• Maintains alignment of buttons, display, and connectors
• Reduces flexing and vibration that can cause rattles
• Common signs of a failed bracket include a loose or shifting control area, rattling from the console, or visible cracks/broken tabs

• Disconnect power to the appliance before servicing
• Take photos of wiring and component layout to aid reassembly
• Transfer any clips, insulators, or guides from the original bracket to the new one
• Handle nearby electronics with ESD care and do not overtighten fasteners

A white replacement door handle that restores a usable grip and appearance to your appliance door. Ideal when the original handle is cracked, loose, or missing so the door can be opened and closed reliably. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces cracked, broken, loose or missing handles that make the door difficult to operate.
• Matches original mounting points for a direct-fit replacement.
• Restores the door's finished appearance and basic function.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access the handle mounting screws by opening/removing the door panel per the OEM service instructions.
• Use basic hand tools and retain all original fasteners and trim for reassembly.

Replace a damaged or non-sealing microwave outer door to restore safe cooking and proper door closure. This outer door assembly provides the exterior panel, latch area and viewing window needed for secure operation and heat containment. What it does:

• Replaces a cracked, dented or warped outer door panel so the microwave closes and seals correctly
• Restores the door latch area to help the unit start and run normally
• Replaces a door with a damaged viewing window or cosmetic defects
• Helps address issues like the door not closing fully, visible damage, or difficulty latching

• One outer microwave door assembly

• Disconnect power and ensure the unit is fully de-energized before starting
• Handle glass and trim carefully; support the door during removal and installation to avoid damage
• Verify latch engagement and door alignment after installation; adjust hinges per the service manual if needed
• Inspect for proper operation; replace switches only if faulty