Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Harness to corset & shifter
New lid switch from Appliance Parts Pros Read more
Includes 12 terminals.
I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more
We had two problems at the same time. The washer was occasionally overflowing especially on super loads, and also leaking out the bottom, which got worse really fast. The overflow problem we have had before when the pressure switch hose became plugged with gunk, but cleaning the hose didn' fix it this time. The leak could be seen just above the trans. housing at the drum, so we diagnosed a bad seal. Knowing that the bearing would have to be running with water in it we also ordered the bearing... Read more
This transmission and brake assembly includes the tub seal and is used on many General Electric top load washers.
Replaced transmission and brake assembly. The video on appliancepartspros.com was very helpful. A few comments: 1) On my model, there was no wiring harness to unhook to detach the lid switch, as was shown on the video. Instead, I had to remove the switch itself. Underneath, one of the short edges of the switch has a clip that you depress, and then you can poke the switch up. Once it's loose, then you can turn it a bit and work it down through the hole so it's free of the lid. 2) The tub nut may... Read more
Pulled front panel off. Unbolted and removed top cover. Removed tub trim cover. Removed and replaced gasket and dampers. Put it a back together took about 20 minutes Read more
I removed the 3 screws at back to release backsplash after taking out the knobs.I then released the timer by removing 1 screw and the broken backsplash was extracted. I then connected the timer, load size and temperature controls to the new backsplash, slide same into position and replaced the three screws. Mission was accomplished in less than 10 minutes!!!! Read more
I fixed by taking the washer apart... then I ordered all the parts from the appliancepartspros store and installed with no issues. Read more