Wdt7500sahz0 Parts

This factory fastener is a #10-16 screw used to secure appliance panels and components. Replacing worn or missing hardware restores a tight fit, helps prevent rattles, and keeps parts properly aligned for dependable operation.

• Secures brackets, panels, and covers to the cabinet or frame
• Replaces missing, stripped, or corroded mounting hardware
• Helps reduce vibration and rattling from loose mounts
• Correct 10-16 thread to match designated OEM mounting points

• Disconnect power and shut off water or gas supply before servicing
• Match the screw to the original location using your model's diagram
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• If replacing multiple screws, swap one at a time to maintain alignment

This positioner is a replacement positioning assembly that restores proper alignment and movement of the related component so moving parts track and engage correctly. Installing the correct positioner helps reduce binding and uneven operation. What it does

• Holds and aligns a moving component so it operates in the intended position
• Ensures smooth engagement and reduces binding or rubbing during movement
• Helps prevent uneven operation, misalignment, or noisy movement when worn
• Common symptom: component drifts out of place, binds, or makes unusual noises during operation

• Disconnect power (and gas if applicable) before beginning any repair to avoid shock or injury
• Use basic hand tools; handle small fasteners and clips carefully to avoid loss

The Jumper Wire is an OEM part for Whirlpool built-in dishwashers. Located internally throughout the frame, jumper wires provide electrical connectivity between control circuit boards to power critical functions. 

Symptoms of a bad jumper wire include:

• Intermittent or incomplete wash cycles    
• Error codes displayed related to control systems  
• Buzzing noises emanating from internal components
• Inoperable features like heating or water valves

Causes of jumper wire failure are often fraying, cracking or breakage of fragile conductive strands from continuous vibrational motion over many usage cycles. Physical kinks or pinches during repairs can also impair connectivity.

Compatible models also include those by Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore.

Cover-Box protects the appliance's control box and internal wiring by enclosing electronic components to keep out dust and accidental contact, helping maintain reliable operation and reduce the chance of component damage. What it does:

• Encloses and protects the control box and wiring from dirt, debris and incidental contact.
• Helps prevent exposed wires and component damage that can lead to intermittent operation or electrical faults.
• Restores structural protection when the original cover is cracked, warped, or missing.
• Matches OEM fit and mounting points to secure the control assembly in place.

• Disconnect power to the appliance before beginning any service.
• Remove screws or fasteners securing the old cover; keep hardware for reuse unless damaged.
• Ensure wiring and connectors are routed correctly and fully seated before reinstalling the cover.

Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:

• Supports and guides the washer drum so it turns smoothly and stays aligned.
• Reduces friction between the drum and cabinet, helping prevent scraping or binding.
• Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.

• Disconnect power and turn off water supply before servicing the appliance.
• Access may require removing the cabinet, front or rear panel depending on model.
• Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
• Reassemble and test the washer after installation to ensure proper drum movement.

This cup shelf assembly replaces a damaged or missing refrigerator door shelf to restore secure storage for cups, bottles and small items. It snaps into the door for everyday organization and keeps items from shifting during use. What it does:

• Provides a stable shelf on the refrigerator door to hold cups, bottles and jars
• Replaces cracked, broken or missing door shelf that lets items fall or shift
• Restores original door storage layout and helps prevent spills
• Fits the door's existing mounting points for a secure hold

• One cup shelf assembly (11")

• Remove contents from the door area before installing
• Often snaps into place; may require basic hand tools to remove the old shelf
• Do not force parts; align mounting tabs and press evenly until seated

Adjuster assembly that restores proper cabinet height and stability so doors, drawers and internal components align and operate correctly. Replacing a damaged adjuster helps reduce rocking, vibration and uneven operation. What it does:

• Provides height adjustment to correct uneven floors and restore a level installation
• Stabilizes the appliance cabinet to minimize rocking and excess vibration
• Helps doors and drawers close and align properly when the original adjuster is worn or damaged
• Common symptoms: unit sits uneven, rocks, vibrates more than usual, or doors/drawers misalign

• Disconnect power (and water, if applicable) before beginning any repair
• Access and replace following your model's service instructions; appliance may need to be raised and safely supported
• Use correct hand tools and tighten securely without over-torquing

The Leveling Leg is an OEM part for Whirlpool dishwashers. It is an adjustable leg that is used to level the dishwasher and stabilize it when installed under the kitchen counter or inside cabinetry.  

Causes of a bad leveling leg often relate to normal wear and tear over time, repeated adjustments, or potential overtightening that leads to thread damage.

Symptoms of a bad leveling leg include:

• The dishwasher is not sitting level and appears unstable  
• Leaks occurring around the dishwasher perimeter or door seal
• Drainage or pooling of water inside the dishwasher
• Cabinetry or countertops showing scratches or wear

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Terminal Block is an OEM part for Whirlpool dishwashers.The terminal block facilitates the flow of electricity throughout the appliance, enabling functions like water heating, pump operation, and cycle control.

Causes can be normal wear over time, or damage from moisture exposure. If you notice any of the above symptoms, replace the terminal block with this genuine OEM part to restore reliable electrical connections and proper operation.

Symptoms of a bad terminal block include:

• The dishwasher not starting or unexpected beeping/error codes
• Sudden lack of hot water or drying issues
• Electrical shock hazard from exposed terminals

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This lower wiring harness assembly routes power and signals to the appliance's lower components, restoring proper electrical connections so the unit can operate reliably. It's a direct-replacement harness used where factory wiring was damaged or disconnected. What it does:

• Replaces the lower cabinet wiring that connects switches, sensors and motor/valve circuits
• Restores power and signal paths that can cause intermittent operation or failure to run
• Helps eliminate loose, frayed or broken wire connections that create electrical faults
• Supports safe, correct routing and connector fit for reliable component function

• One lower wiring harness assembly as shown

• Disconnect power (unplug or shut off breaker) before starting any work
• Take a photo of the original wiring and connector positions to ensure correct reassembly
• Route the harness exactly as OEM; avoid pinching or sharp edges and secure with existing clips/fasteners

The Clip is an OEM part for Whirlpool dishwashers. It securely attaches the drain hose in place, directing wastewater out of the dishwasher during drain cycles.

Causes of a bad clip can be cracks, breaks, or deformations causing weakened grip. Normal wear and repeated drain cycles can also damage the clip over time.

Symptoms of a bad drain hose clip include:

• Water or leaks around the base of the dishwasher
• Puddles forming due to the hose slipping out of place
• Improper drainage if the hose is not positioned correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Track/Support is an OEM component specifically designed for Whirlpool dishwashers. It anchors underneath the dish rack and slides upon which it rolls. 

Causes of a faulty track/support can include cracks, deformities or other damage accumulating from years of bearing weight.

Symptoms of a bad track/support include: 

• Dishes failing to properly secure inside wash rack
• Rack sliding out of position unintentionally  
• Noisy vibrations or shaking heard from below

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Wire Harness Assembly is an OEM component for Whirlpool dishwashers. It is the main electrical wiring component that connects and transmits power between various areas and modules inside the dishwasher. 

Causes of a bad wire harness can include cracked, frayed, or damaged insulation over wiring due to normal movement and vibration during the wash cycle. 

Symptoms of a bad wire harness assembly include:

• Lights or elements failing to power on as expected  
• Control panel malfunctions or unintended switches in operation modes
• The entire dishwasher ceasing to function

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This UI housing assembly secures and protects the appliance's user interface components and provides the finished control-panel appearance. It restores a stable mounting point for buttons, displays and the control board so the console looks and functions correctly. What it does:

• Holds and protects the user interface components (buttons, display/window, control board) from damage and vibration
• Keeps control panel aligned for reliable button presses and clear display visibility
• Replaces cracked, warped or cosmetic-damaged housings that expose electronics
• Helps stop loose or misaligned buttons and prevents debris from reaching the electronics

• One UI housing assembly

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove control panel trim and mounting screws carefully; save hardware for reassembly
• Handle ribbon cables and connectors gently when separating or reconnecting the control board

This push retainer is a small press-on fastener that secures components to shafts or studs inside your appliance. It restores a tight, reliable hold so knobs, trim, or linkages don't loosen or fall off during use. What it does:

• Presses onto a shaft or stud to secure knobs, trim, or linkages—no threads required
• Maintains spring tension to resist vibration during normal operation
• Replaces a missing, bent, or weakened retainer
• Common symptoms: loose or wobbly knobs/trim, parts slipping off, or a retainer that won't stay on

• 1 push retainer

• Disconnect power; for gas appliances, also shut off the gas supply
• Access the shaft/stud and carefully remove the old retainer with pliers; avoid damaging adjacent plastic parts
• Press the new retainer on squarely using a deep socket or nut driver; do not hammer directly
• If the mating shaft or component is damaged or deformed, address that before installing the new retainer

A pronged cup washer that secures and cushions mating parts on appliances, restoring proper fit and reducing wobble. Replaces worn or damaged cup-style washers to help maintain stable component alignment and reliable operation. What it does:

• Fits into a cup or socket to hold shafts, knobs, or trim pieces in place
• Pronged design grips the mounting surface to prevent rotation and slippage
• Helps reduce vibration and noise caused by loose or worn washers
• Commonly used when a knob, shaft, or trim feels loose or wobbly

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the related knob or trim carefully to access the washer; note orientation for correct reassembly
• Press the washer fully into the cup or socket so the prongs engage the mounting surface
• Inspect the surrounding components for wear and replace any damaged parts