Wed7ohebwo Parts

Replace a cracked or missing bracket to keep appliance components securely mounted and aligned. Restoring this support helps prevent movement, vibration, and premature wear, so the connected part operates as intended.

• Provides a rigid mounting point for an associated component or assembly
• Maintains correct alignment and spacing within the appliance
• Helps reduce vibration, rattling, or shifting during operation
• Replaces brackets that are cracked, bent, or broken
• Common signs: loose or wobbly parts, misalignment, rattling noises, or visible bracket damage

• Disconnect power; also shut off the water supply before servicing
• Wear cut-resistant gloves—bracket edges can be sharp
• Reuse original screws/clips unless replacements are specified
• Hand-start fasteners, align parts, and tighten evenly without overtightening

This axial motor assembly drives a cooling fan to move air through the appliance, helping protect internal components from heat. Replacing a worn or noisy unit restores ventilation and reduces heat-related shutdowns or performance issues.

• Circulates air across heat-generating parts to dissipate heat
• Helps maintain stable operating temperature and protect electronics
• Failure signs can include the fan not running, intermittent operation, loud or grinding noise, overheating, or a burning smell
• Inadequate airflow may trigger thermal cutoffs or nuisance shutdowns

• Disconnect power before servicing; allow hot components to cool
• Access the motor location and note wire positions; take photos for reference
• Transfer any brackets or grommets from the old unit if required; keep wiring clear of the fan path
• After mounting, hand-spin the fan to ensure free movement before restoring power and checking airflow

Measures 72". If longer belt is needed use WP8182481 which measures 73 5/8".

Replacement door assembly for Whirlpool appliances that restores proper closure and appearance. This direct-fit part replaces a damaged or dented door so the appliance seals and closes correctly. What it does:

• Replaces a cracked, dented, or damaged door to restore the appliance's exterior and function.
• Helps ensure the door latches and aligns correctly to prevent leaks or loss of temperature.
• Restores the door surface and trim for improved appearance and user access.
• Reduces noise or rubbing caused by a misshapen or warped door.

• Disconnect power (and gas if applicable) before starting any work.
• Follow the appliance's service manual or wiring diagram for removal and reassembly steps.
• Use proper tools and, if needed, a second person to handle larger or heavier doors safely.
• Handle glass or trim carefully to avoid damage or injury; wear gloves and eye protection.

Flat metal washer that helps secure fasteners and evenly distribute load on mounting points. Replacing a worn or corroded washer restores proper fastener grip, reduces vibration, and stops loose or rattling parts. What it does:

• Provides a smooth bearing surface for nuts and bolts, preventing pull-through and damage
• Distributes clamping force to protect mounting surfaces and maintain alignment
• Helps reduce vibration and noise from loose or worn fasteners
• Replace when bent, corroded, cracked, or missing to restore secure mounting

• Always disconnect power to the appliance before beginning repairs; follow all safety precautions
• Use the correct size fastener and torque to avoid over-tightening or crushing the washer
• Inspect surrounding hardware and replace any damaged or corroded bolts, nuts, or brackets

This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:

• Provides a sealed change of direction for a water, drain, or vent line inside the appliance
• Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
• Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
• Helps eliminate intermittent draining or venting issues caused by a damaged fitting

• Disconnect power and shut off water supply before accessing the part
• Verify orientation and routing before removing the old elbow to ensure correct reinstallation
• Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
• Tighten fittings to secure but avoid over-tightening which can crack plastic components

This motor start/run capacitor restores the electrical boost a motor needs to start and run smoothly in compatible Whirlpool appliances. Replacing a failing capacitor can stop motor hesitations and restore normal cycling. What it does:

• Provides the temporary electrical charge needed for compressor or motor startup and stable running
• Helps prevent long crank times, slow or labored motor operation, and intermittent motor stalls
• Reduces humming or buzzing from a motor that struggles to start
• Supports consistent appliance cycles by stabilizing voltage to the motor

• One replacement capacitor

• Disconnect power to the appliance at the breaker or unplug before beginning any service
• Capacitors can hold a charge—discharge safely before touching terminals
• Handle and mount according to the appliance wiring diagram; match terminal connections exactly

This electronic control board replaces the dryer's user interface console and restores control and display functions so cycles, temperature and time settings respond correctly. It provides the logic for the console and communicates with other dryer systems. What it does:

• Receives button/touch inputs and sends commands to start and control dryer cycles
• Interfaces with the display to show cycle status and settings
• Helps regulate cycle selection, timing and temperature signals to the main control
• Common symptom fix: unresponsive buttons, no display, or inability to select cycles

• Disconnect power at the breaker or unplug the dryer before servicing to avoid electrical shock
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available
• Verify all wiring connectors are fully seated during reassembly and note connector locations before removal

A replacement mounting screw to secure appliance panels and components so parts stay properly fastened during normal use. Small but essential hardware for stable, rattle-free operation and reliable repairs. What it does:

• Fastens panels, brackets or components to the appliance chassis
• Prevents loose panels, vibration noise, or parts shifting during operation
• Used when original screw is lost, damaged, or stripped
• Restores proper fit and alignment after disassembly for service

• Disconnect power and water before starting any repair
• Use the correct screw type and length; do not force or substitute oversized fasteners
• Tighten until snug—avoid overtightening to prevent stripped threads or cracked parts
• Keep small parts away from children and pets

This replacement frame restores the appliance's front trim, helping maintain a secure fit and finished appearance around the door area. Designed to replace a cracked or damaged trim that affects alignment or sealing. What it does:

• Replaces damaged or cracked front trim to restore cosmetic appearance
• Secures adjacent panels and helps keep the door aligned
• Helps prevent gaps that can cause airflow or sealing issues
• Restores a proper mounting surface for door components and hardware

• Disconnect power (or gas) and remove supply lines where applicable before beginning
• Use basic hand tools; access may require removing the door or outer panels
• Handle carefully to avoid scratching finished surfaces; keep fasteners for reassembly